Operating instructions

Recording
VQT4W66
29
Timer recording
To use TV Guide system
Refer to “Using TV Guide system”. (> 24)
To edit the timer recording on the TV Guide
screen
1 Select the programme to edit, then press the
red button.
2 Select “Timer Rec Edit”, then press [OK].
3 Go to step 3 on page 30.
To cancel a timer recording on the TV Guide
screen
1 Select the programme to cancel, then press
the red button.
2 Select “Timer Rec Cancel”, then press [OK].
(“F” disappears)
Operation during Recording
Refer to “Operation during Recording”. (> 28)
Some broadcasters may not send programme information.
When programme information is not displayed correctly,
use manual timer recording. (> 30)
The receipt of the TV Guide data via Set Top Box is not
possible.
When timer recording from the external equipment, use
manual timer recording. (> 30)
You can set the start and finish time to make the timer
recording work successfully. (> 77, 82, Timer Record Start
Buffer, Timer Record Stop Buffer)
1 On the TV Guide screen:
Press the blue button.
2 Select the item, then press [OK].
To return to the previous TV Guide list
Select “All Digital Channels” in step 2.
Category may not be assigned correctly depending on the
programme information.
This operation will only record to built-in HDD.
This unit can record two programmes being
broadcasted at the same time.
Preparation
If you want to change the recording mode:
Press [REC MODE] and select the recording
mode, then press [OK].
1 Press [GUIDE].
TV Guide screen appears.
2 Select the programme, then press the
red button.
The timer iconF” (red) is displayed.
If on-screen instructions are displayed,
follow them.
Page Down
Information
Page Up
Category+24 hours-24 hoursTimer Rec.
TUE 01.01
TV Guide
8:00 AM - 9:45 AM
TUE 01.01.2013 8:05 AM
Category: All Digital Channels
8:00 AM AM AM AM AM AM8:30 9:00 9:30 10:00 10:30
OK
RETURN
To select the programmes of a specific
category
DMRBWT835GL_eng.book 29 ページ 2013年2月1日 金曜日 午前9時55分