Electronics LCD Television Instruction Manual DLP-26C2, DLP-26C3, DLP-32C1, DLP-32C2, DLP-32C3, DLP-37C3, DLP-42C1

MUTE

PICTURE

ASPECT

SOUND

POWER

RECALL

MULTIMEDIA

PR 19 – – – – –

Mono

Clock 1 2 : 0 0

PR 19 – – – – –

AV1

Clock 1 2 : 0 0

PR 19 – – – – –

AV3

Clock 1 2 : 0 0

PR 19 – – – – –

AV2

Clock 1 2 : 0 0

Selection of AV and

Multimedia Input Signal

When watching video, Camcorder, DVD, Cable TV with AV

- See page 12 for connection method of Camcorder and Video.

- When pressing ” ” button on the TV set, screen changes as follows:

TV => AV1 => AV2 => AV3/S-Video => PC => HDMI => Component => TV

1. Pressing the “ ” button on the remote controller.

• The screen changes as follows:

TV => AV1 => AV2 => AV3 => TV

Note :

Cautions in menu setup

• The menu disappears if you do not operate any button for 30 seconds from the menu.

• Don’t connect the composite video signal and S-video signal to the video input terminal AV3 at the same time. If con-

necting both signals at the same time, the S-video takes precedence.

• If sound signal is mono only, connect it to the L-terminal of the sound input terminal.