GB LCD TELEVISION INSTRUCTION MANUAL DLP-17D3 DSL-17D3 DLP-20D3 DLP-17D3N DLP-20D3N PAL B/G , D/K, I/I, SECAM B/ G , D/ K, L/ L’, NTSC(AV) TELETEXT SCART/ VIDEO / S-VIDEO / COMPONENT/ PC (Option) MULTI-LANGUAGE OSD Helpline Number: 0870 100 2525
Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock.
GB Safety Precautions 1. CLEANING Unplug this TV equipment from the AC power outlet before cleaning. Do not use liquid cleaner or aerosol cleaners. Use a soft and damp cloth for cleaning. 2. ATTACHMENTS Do not use attachments not recommended by the TV equipment manufacturer as they may result in the risk of fire, electric shock or other injury. 3.
Contents Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Supplied Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Functional Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Remote controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GB Important Safeguards Location Heat, Moisture, Dust, Vibration Position your set so that bright light or sunlight doesn’t fall directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Do not expose the set to dripping or splashing. Ventilation Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. Leave at least 10 cm around each side of the TV set.
Supplied Accessories Make sure that the following accessories are provided with the product.
GB Functional Overview Remote controller TELETEXT mode TV mode A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 POWER SOUND MUTE NUMBER 0..9 SLEEP TV / AV PROGRAM UP (CURSOR UP) VOLUME DOWN (CURSOR LEFT) . . .
Local Control Front Power On/Off (B1) Remote Sensor (B6) PR Up/Down (B2) Volume Up/Down (B3) AV Menu (B4) (B5) LED Indicator (B7) Rear (C6) Video Input Socket (C7) Audio Input (L+R) Socket (C1) Aerial jack (C2) SCART socket (C3) (C4) PC AUDIO PC INPUT jack jack (Option) (Option) (C5) Component jack 8 (C8) S-Video jack (C9) Headphone jack
GB Preparation Inserting Batteries into the Remote Control Unit To load the batteries, turn the remote control handset over and open the battery compartment. Insert the batteries (Two 1.5v, type R03 or AAA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment. Note: To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. Mains Connection 1.
Preparation Aerial Connection CONNECTING THE TV DIRECTLY TO AN AERIAL Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminal on the back of the TV set.
GB Preparation AERIAL CONNECTION WITH VCR Connect your aerial cable to the RF(aerial) IN terminal on the VCR. Connect the RF OUT terminal of the VCR to the Aerial terminal on the TV set with RF cable. NOTE: If you wish to use only the Aerial (RF) connection, then you should store the VCR channel on programme number “ZERO”using the “Manual tuning” function (See page 22). Now you can watch the VCR in TV mode by selecting the programme number “PR00”.
Preparation Connecting external equipment PC Audio cable PC D-sub cable PC connection (option) Scart cable Headphone RCA cable S-video cable Set Top Box VCR/DVD DVD Set Top Box VCR/DVD/Camcorder/ Video Game 12
GB Preparation TV/AV/PC MODE SELECTION (PC mode is available only for DLP-17/20D3/DSL-17D3) ) button on the control panel repeatedly to select the source. Press the TV/AV( ) button on the remote controller. You can also select the source using TV/AV( TV AV1 AV2 S-VIDEO COMPONENT( PC) TV In TV mode, you can change the TV programme number with the UP/DOWN button or the NUMBER button. NOTE: When the TV SET has no signal, a screen saver will appear on the screen.
Start Up Language Menu The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used for all the OSD (On Screen Display) menus. The user must enter a choice of language before proceeding further. The language entered at this stage can still be modified at any later time, by entering the LANGUAGE menu (accessed from the FEATURES menu: see later section under MENU DESCRIPTION).
GB Daily Use Switching On TV Set 1) If stand-by indicator (B7) is red, then the TV set is in stand-by mode. You can switch on using the remote control POWER button (A1), the NUMBER 0….9 buttons (A3), or PROGRAM UP (A6) / DOWN (A21) buttons. The front panel PROGRAM UP/ DOWN buttons (B2) can also be used. Once on, the stand-by indicator turns to green and the picture appears on the screen. 2) If stand-by indicator (B7) is not lit, then the TV set is powered off.
Daily Use Program Selection (From 0 to 99) Direct selection Use the remote control NUMBER 0…9 buttons (A3). For two digits program numbers, enter the second digit within 2 seconds. Up / Down selection Use the remote control PROGRAM UP (A6) / DOWN (A21) buttons or the TV set front panel PROGRAM UP / DOWN buttons (B2). Sound Control TV volume adjustment Use the remote control VOLUME UP (A20) / DOWN (A7) buttons or the TV set front panel VOLUME UP / DOWN buttons (B3).
GB Daily Use Sound effects A SPATIAL sound effect is available, using the remote control 3D (A13) Spatial sound effect button. SPATIAL Sound transmission mode STEREO The following display appears: 18:30 To return to initial sound effect, press again the 3D (A13) button. The following display appears: Clock No sound effect Sound transmission mode Clock OFF STEREO 18:30 As an option, the sound effects PANORAMA and Dolby Virtual are available with the same button.
Daily Use Format Selection AUTO setting : If picture format signalling data is received, then the most appropriate ZOOM format will be automatically selected. In the absence of this data, the default ZOOM format will be selected(see page 24, ZOOM AUTO function under FEATURES MENU).
GB Menus Description DEFAULT ZOOM CONTROL If the ZOOM control is set to AUTO (A15, see page 18 and 24, FORMAT SELECTION), then the picture format presented is controlled by the received picture format signalling data embedded in the transmission. In the absence of this signalling data (as can often be the case) a default format must be used. This default format can be selected by the ZOOM AUTO function.
Menus Description Picture Menu (For operating instructions, see page 19, HOW TO USE THE SUB-MENUS) PICTURE - Select and adjust the level of each function : BACKMODE NORMAL I LIGHT, BRIGHTNESS, CONTRAST, COLOUR, SHARPBACKLIGHT BRIGHTNESS NESS, TINT (if available). CONTRAST - The above modified values are automatically stored COLOUR SHARPNESS in FAVOURITE mode. TINT NOISE RED. ON - NOISE REDUCTION feature can be activated or not.
GB Menus Description Equalizer Menu - Select the equalizer band by use of the CURSOR EQUALIZER LEFT (A7) or RIGHT (A20) buttons. NORMAL - Adjust the level of each of the 5 equalizer bands, 100Hz, 300Hz, 1000Hz, 3000Hz, 8000Hz, by use of the CURSOR UP (A6) and DOWN (A21) buttons. - The above modified values are automatically stored in FAVOURITE mode. 100 300 1K - The OK button (A18) will select the picture presets Adjust Position Previous Preset MUSIC, SPEECH, NORMAL, FAVOURITE.
Edit Menu This allows you to easily manipulate the existing program order allocation, by using Edit menu functions described below.
GB Channel searching - Select the “Frequency” function. - Press, and hold for more than 1second, the remote control CURSOR RIGHT (A20) LEFT (A7) buttons to start up [down] manual tuning. - Searching will stop automatically at the next channel found (to stop tuning, press the remote control MENU button (A19). Note: You can directly locate a program by entering the data into the “channel” or the “frequency” function. Enter station name It is possible to enter your own choice of name for each program.
Features Menu See section near the end of section DAILY USE for a more detailed explanation of these functions. (For operating instructions see page 19, HOW TO USE THE SUB-MENUS) 1. Adjust this value ON or OFF. - In stand-by mode, the stand-by indicator flashes red and green to indicate the CHILD LOCK is set. - The front panel TV buttons (B2, B3, B4) become inactive and the TV will only respond to the remote control. 1. When switched to ON: Prevents the use of the TV set without remote control 2.
GB Language Menu - Select the preferred LANGUAGE by use of the CURSOR LEFT (A7), RIGHT (A20) buttons, and the CURSOR UP (A6) or DOWN (A21) buttons. - Press the OK button (A18) to confirm the selection (the choice will be highlighted in red). Note: The languages shown are subject to modification without prior notice.
Teletext ENTERING/LEAVING TELETEXT MODE - Select the desired program with teletext. - Press the remote control TELETEXT ( ) button (A22) to select teletext mode. The initial page (or the last page viewed if you have already used teletext in the present channel) appears. - Teletext And Teletext (TAT) function (OPTION): if you want to watch two teletext pages on same screen, press the TELETEXT ( ) button (A22) again.
GB Useful Teletext Functions INDEX ( page. ) button (A18): Allows you to return directly to the initial teletext SUBPAGE ( ) button (A10): - Press the SUBPAGE button (A10). In the extreme top left corner, instead of the page number, ‘’S. . . .’’ will be displayed. This is ready to accept the subpage number. - Enter directly the subpage number you want with the remote control NUMBER 0..9 buttons (A3): for example to request the 2nd subpage, type 0002.
Teletext Format Picture & Sound Control Doubling character height Repeatedly pressing the HEIGHT ( ) button (A23) doubles the character height in the following order: Upper half of the page (UP) Lower half of the page (DOWN) Return to normal height. If the page is in UP or DOWN mode, then normal size is automatically set if : - A new page request is made (e.g. CYAN, INDEX or PAGE UP/DOWN). - CANCEL mode (A8) function is used. - VOLUME menu is activated with the MENU button (A19).
GB Wall/Arm Mounting mode, as these would not allow all teletext lines to be displayed. Therefore only the formats ZOOM 14:9 AND ZOOM 16:9 (available with wide screen TV models) cannot be preserved with teletext subtitles. In this situation the default format FULL SCREEN (equal to 16:9) will be used. Attaching a Wall or Arm mounting device This TV supports the VESA mounting standard and will accommodate various VESA mounting devices.
Troubleshooting Please check the following items before calling for the repair services. Problem TV set Control/System lock up Remote control does not work. Local buttons do not work. No picture and no sound. No picture. No colour Picture is too light or too dark. The picture is improperly tinted. No sound. Aerial The picture is not sharp. The picture shakes. The picture is ghosted. The picture is spotted(snow). Picture has lines and faded colours.
GB Specifications MODEL NAME DLP-17D3, DSL-17D3, DLP-17D3N DLP-20D3 DLP-20D3N PANEL 17” WIDE TFT LCD 20” TFT LCD SCREEN SIZE 434.38mm 510.54mm DISPLAY COLOUR 16.7M 16.7M CONTRAST RATIO 600:1 500:1(AUO), 350:1 (LPL) PIXEL PITCH 0.291(H) x 0.291(V) 0.51(H) x 0.51(V) ASPECT RATIO 15:9 4:3 POWER REQUIREMENT AC 100V-240~, 50/60Hz POWER CONSUMPTION 45W 55W SOUND OUTPUT 2.0W + 2.0W 2.0W + 2.
