Electronics INSTRUCTION MANUAL LCD TELEVISION DLT-26C2, DLT-26C3, DLT-32C1, DLT-32C2, DLT-32C3, DLT-37C3

60
In PC mode
Symptom Check items
“OUT OF RANGE”
appears on the
screen
- Check the resolution and frequency of your PC. Then, adjust them to optimum
condition for LCD TV.
- Refer to the table of PC mode input format (If registered resolution and frequen-
cy on the table no listed then no picture will be displayed.)
“NO SIGNAL”
appears on
the screen.
- Ensure that the signal cable is firmly connected to PC and TV.
Image is not
clear.
- Adjust the PHASE control.
Image is not
centered.
- Adjust the H-POSITION and V-POSITION control.
• AFTER SALES SERVICE
Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that
a faulty condition may be present.
Troubleshooting