LCD TELEVISION INSTRUCTION MANUAL DLT-26C2 DLT-26C3 DLT-32C2 DLT-32C3 DLT-32C5 DLT-32C6 DLT-32C7 DLT-37C3 DLT-37C7 GB
Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock.
Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain them safely for future reference. Follow all operations and instructions accordingly. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3.
Important Safeguards 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 14.
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. WARNING Ignoring or disregarding the contents of this section and improper operation of the product may result in the person’s death or serious injury. In case of an accident, please unplug the unit from the outlet immediately.
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. CAUTION Ignoring or disregarding the contents of this section and improper operation of the product may result in the person’s death or serious injury. Please keep the user’s manual in a safe place for future reference.
Table of Contents Installation and Maintenance Antenna Connection . . . . . . . . . . . . Video Connection . . . . . . . . . . . . . . Camcorder & Video Game Connection. DVD Player Connection . . . . . . . . . . STB (Set Top Box) Connection . . . . . . PC Connection . . . . . . . . . . . . . . . . Cable TV Broadcasting Connection . . . Connect with the Dolby Digital AMP . . Name of Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supplied Accessories Make sure that the following accessories are provided with the product. AC cord PR SEL /PA T EC Instruction manual GE /PA PR GE Cover Bottom - When you install wall mounting you set up cover bottom like upper picture. Remote controller Batteries Cable holder (Except C2 Series) The method of wire arrangement 1. Assemble the cable holder enclosed on the back of TV.
Antenna Connection Indoor Antenna Connection 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of wrong antenna connection. Be sure to check its direction and place when installing. combining adapter 2. Connect the combining adapter to the antenna input at the left side of the TV set. WHEN USING THE COMBINING ADAPTER : You may obtain the combining adapter at your closest Service Centre.
Antenna Connection CTV Antenna Connection Such community TV Antenna installation may be found in most of co-op apartments. When a coaxial cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right. Antenna socket on the wall Antenna socket at the left side of the TV set ANT/CABLE When a feeder cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right.
Antenna Connection Outdoor Antenna Connection Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses. Single Antenna Connection VHF Antenna Back of the tv set UHF Antenna OPTICAL PC INPUT PC AUDIO S-VIDEO AV3 L - AUDIO - R Pr Pb R L Y COMPONENT ANT/CABLE Separate Antenna Connection.
Video Connection Connecting with an External Source You may connect an S-Video input to enjoy clearer and brighter picture images. You can make the connection with the AV3 input. S-Video PC INPUT PC AUDIO S-VIDEO AV3 L - AUDIO - R Note : If S-video and RCA jack are connected the same time, The TV set will only detect the S-Video mode. • If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is recommended for better picture quality.
Camcorder & Video Game Connection Watching the Camcorder Recording on TV 1. Prepare the S-video and RCA connector. 2. These connectors connect to S-video or AV 3 as shown in the picture below. 3. Turn on the TV set and camcorder/video game. 4. Select AV3/S-video mode, using the ” AV”button of the Remote controller or “ ” button of the TV set.
DVD Player connection When connecting with a component cable and Euro SCART cable Back of the tv set OPTICAL PC INPUT PC AUDIO S-VIDEO AV3 L - AUDIO - R Pr Pb R L Y COMPONENT DVD Note : • When you connect with the component video, please check the colour of the cable between the DVD and TV set.
STB(Set Top Box) Connection When connecting with a HDMI cable Back of the tv set OPTICAL PC INPUT PC AUDIO S-VIDEO AV3 L - AUDIO - R Pr Pb R L Y COMPONENT Set Top Box When connecting with a component cable Back of the tv set OPTICAL PC INPUT PC AUDIO S-VIDEO AV3 L - AUDIO - R Pr Pb R L COMPONENT Set Top Box 15 Y
PC Connection When connecting with PC(D-Sub) cable. 1. First adjust resolution of the PC. (Refer to table in page 17.) 2. Connect between PC and TV set using the D-sub and Audio cable as shown in the picture below. 3. Turn on the PC and TV set. ” button of the TV set. 4. Select PC mode by pressing the “MULTIMEDIA” button on the remote control or ” Back of the tv set OPTICAL PC INPUT PC AUDIO S-VIDEO AV3 L - AUDIO - R Pr Pb R L Y COMPONENT PC When connecting with a HDMI cable. 1.
PC Connection PC CONNECTION NOTES: 1) The resolution of the TV set is best at 1360(6) x 768(WXGA). 2) If there is a [Vertial Frequency] setting menu in the [Display] Menu of the PC, adjust the frequency to 60Hz. 3) If the PC resolution is too high, it may be hard to detect signals. Select a suitable resolution. 4) HDMI input port receives only digital Signal. 5) Depending on the graphic card when you plug & unplug the HDMI connection the screen may not display correctly.
Cable TV Broadcasting Connection External Input Connection Source Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. You may make the connection to either the Component input or SCART input AV1 or AV2.
Connect with the Dolby Digital AMP. If you connect the optical output to a Dolby digital AMP, you can listen to better sound.
Name of Each Part Front / Side Panel Buttons on the TV set have the same functions as those of the remote controller. Control Key Buttons. ① TV/VIDEO Button : Each time you press this button, the TV will cycle through: TV / AV1 / AV2 / AV3(S-Video) / PC/HDMI / COMPONENT. ② MENU Button : Use this button to enter and exit the MENU. ③ ▲ VOL ▼Buttons : Use these buttons to change your TV’s volume or to move the cursor in the menu.
Name of Each Part Side and Rear Panel Side Panel OPTICAL PC INPUT PC AUDIO S-VIDEO AV3 L - AUDIO - R Pr Pb R L COMPONENT Rear Panel 21 Y
Parts of the Remote Controller This remote controller is universal; thus, it may be convertible for TV, Video, CTV, etc. 1. (MUTE) : Press this button, and the sound goes off. Press again, and the sound returns. 2. (POWER) : TV on/off button in Stand-By mode. 3. MULTIMEDIA : Each time you press this button,the TV will cycle through: PC => HDMI => Component => PC 4. AV : Each time you press this button, the TV will cycle through: TV => AV1 => AV2 => AV3/S-Video => TV 5. SLEEP : Sleep Timer setting.
Parts of the remote controller 17. MENU : Menu display button. 18. ASPECT : Select screen aspect ratio. Auto => 16:9 => 14:9 => 4:3 => Zoom1 => Zoom2 => Auto Note : When current mode is multimedia ( PC, HDMI, Component), the aspect only works as the 16:9 mode. 19. NORMAL : changes picture mode as follows: Normal I => Normal II => Favourite => Normal I 20. RECALL : The present modes (TV, Video, Component, PC) and Signal information. In TV mode, the Programme number, Sound, and Clock. 21. TEXT : see page 52.
Method To Use Basic Menu Basic Menu - The basic menu appears on the screen if you press the “MENU” button of the remote control. - There are 5 items Picture, Screen, Sound, Function, and Install in the basic menu. - Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward. 1. Press the “MENU” button. • The main menu appears if you press the “MENU” button.
To Watch TV On/Off, Number, Mute, Recall, VOL , PR Buttons with same name in the main body performs the same function. Press the “ON/OFF” button of the front side of the set or Remote controller. • The buttons of the remote control and the main body operate only when AC power is turned on. Note : You can also turn on the TV using “ PR ” or digit key in the ST-BY mode. When pressing the Program button • Select two digits if using the number button for channel selection. For example, to watch channel No.
To Watch TV - If AV1 terminal on TV set is connected with external device, TV will be ON at AV1 mode. Otherwise, TV will be ON at RF mode. 1. Turning on the TV. • Plug AC Cord into a power outlet. • The Stand By LED lamp turns on in red colour. • Press “ ” button of the main body or “POWER” button on the remote control. • The Stand By LED lamp on the front panel begins to fliker in red and green colour and the TV turns on. PR/PAGE 2. Adjust program.
Setting Up TV Stations Auto Tuning - All stations that can be received are stored by this method. It is recommended that you use Auto tuning during installation of this set. 1. Press the “MENU” button to select the Install menu. • Move the selection bar to the Install menu with “ / ” buttons. PR/PAGE PICTURE SELECT PICTURE MODE BRIGHTNESS CONTRAST COLOUR SHARPNESS TINT COLOUR TEMP PR/PAGE POSITION NORMAL 32 58 32 32 32 NORMAL ACCESS EXIT PR/PAGE 2. Select the “Auto Tuning”.
Setting Up TV Stations Manual tuning 1. Press the Number buttons(0~9) or the “ PR ” button to select a program number you want. PR/PAGE SELECT 2. Locate the selection bar on the Manual tuning at the Install menu. • Press the “MENU” button to select the Install menu. • Move the selection bar to the Install menu with “ / ” buttons. • Place the selection bar on Manual Tuning and press the “ ” button. 3. Execute Manual Tuning.
Setting Up TV Stations Setup The Setup menu shows you information as follows: - Picture information: PAL, SECAM, and SECAM-L - Sound information: L, DK3, DK2, DK1, I, BG - Station name, Program number and Real channel number. 1. Searching for channels in the Setup menu • Press the “ PR “ buttons to select a program number you want. • Move to SETUP in the Install menu. • Select the colour and sound system which you want. • Search a real channel with “ / “ buttons.
Setting Up TV Stations Edit The Edit menu shows you information as follows: - Program position assignment: Program number and Station name, Real channel number. - Skip information: Red (Skip Yes), White (Skip No). - One can move on this edit mode directly using „EDIT” button on the remote control. 1. Deleting the program positions. • Move to EDIT in the Install menu. • Move the selection bar to the program number to delete with the “ / ” or “ / “ buttons. • Press the Delete(Yellow) button.
DVB Menu DVB Menu - Press the Menu button to display the main menu. Then, select DVB MENU. You may see the DVB MENU OSD. Whenever you need more information during any DVB MENU directory, press info button “ ” then you will see more detailed information on the screen. And in some menus, you can use the cyan, yellow, red, green buttons. Those buttons’ function depend on which menu it is. Note: • This menu is activated only on digital mode.
DVB Menu Channel List Channel List 1. BBC ONE 2. BBC TWO 3. ITV 1 4. Channel 4 5. five 6. ... Select ◄ ► Function 1 Move Delete BBC ONE Edit Name ▲ ▼ Select Channel Select Lock Watch Favourites i More - Select the MOVE function to change the channel number and press the OK. Enter the new number you want and press the OK button. If the number you are selecting is already memorised for another channel, a warning message will appear on screen. Channel exist.
DVB Menu Favourites Edit Favourite Lists 1. BBC ONE (1) (2) 2. BBC TWO (1) 3. ITV 1 4. Channel 4 5. five (2) (1) (2) 1 6. ... List 1 ◄ ► Select List List 2 BBC ONE List 3 ▲ ▼ Select Channel List 4 Select Add/Remove List 5 i More - This menu allows you to make your favourite channel list. You can make 5 favourite lists. - Move highlight on any list (1~5). Then press the Select key to make your own list.
DVB Menu Guides Select each sub-menus. Guides Now / Next EGP Now / Next EPG - You can check now / next program here. Move highlight up/down and get information. - Yellow/cyan button is for changing the schedule. List Schedule EPG - Press Info key “ ” to see detailed information of each program Timeline Schedule EPG MENU Exit SELECT Select Now / Next EPG Wed 10/11 10:00 Channels Current Event Next Event 23. bid - up.tv 25. TCM 26. UK Style 27. Discovery 28. DiscoveryH&L 30. ITV4 32.
DVB Menu List Schedule EPG - You can check program schedules here. Navigate channel by pressing UP/DOWN/RIGHT/ LEFT button. - Press Yellow/cyan buttons to change date. Red/green buttons are for changing the time. - Press Info key “ ” to see detailed information of each program Electronic Programme Guide Wed 10/11 8:00 BBC ONE Wed 10/11 8:00-10:00 1. BBC ONE 2. BBC TWO 3. ITV 1 4. CHANNEL 4 5. FIVE 6. ITV2 8. 8 10. ITV3 13.
DVB Menu Timers - If you want to watch a special program on time without having to use the remote everyday, please setup Timers. - At first, press select key. You will see time setup OSD. (See the right) - You can change channel at Name. - Setting start/end time as you want at Start / End. - Select Mode (Once, Daily, Weekly) - If a channel is set to change to LOCKed channel, password OSD will be displayed before channel changing.
DVB Menu Settings Setting Select each sub-menu Configuration Configuration This has 4 sub-menus. - Subtitle on/off Installation You also can control this with the remote control SUB TITLE button. MENU Exit Note: You can select sub title language in the Features menu. - Change Banner time : SELECT Select off - 1 sec - 2sec - 4sec - 8sec - You can choose your favourite list (see page 33) in Favourite Mode. If it is selected as off, all channels are shown.
DVB Menu Installation - Automatic Search is the function to scan each channel for services. If you cancel Automatic Search before it is completed, the previous list of services is used, if already stored. - Manual Search is the function to scan for an individual channel. Enter the Channel number to be scanned. - Signal Quality consists of 5 levels -> none - poor - medium - good - very good Do you want to start automatic search? Your previous channel list will be replaced.
DVB Menu Common Interface - This allows you to upgrade your TV set with additional features including access to extra channels (if available) using a conditional access module (eg. TopUp TV). - If there is no CI Card in the slot,„No common interface module detected” appears on the screen. - When you insert the CI Card,„Common interface module inserted” appears on the screen. Then, you can watch pay channels.
Selection of AV and Multimedia Input Signal When watching video, Camcorder, DVD, Cable TV with AV - See page 12 for connection method of Camcorder and Video. ” button on the TV set, screen changes as follows: - When pressing ” TV => AV1 => AV2 => AV3/S-Video => PC => HDMI => Component => TV 1. Pressing the “AV” button on the remote controller.
Selection of AV and Multimedia Input Signal When connecting PC, STB, DVD with Multimedia 1. Pressing the “MULTIMEDIA” button on the remote controller. • The screen changes as follows: PC PC => HDMI => Component => PC CLOCK 12 : 00 Component HDMI CLOCK CLOCK 12 : 00 12 : 00 HDMI & PC mode 1. For optimum picture quality, use 1360(6)x768 computer or set top box output at a 60Hz refresh rate. Using other formats or refresh rates may result in reduced picture quality. 2.
Screen Adjustment When setting up various screen modes - The user may select various screens designed for a good picture without adjusting the brightness, contrast or colour individually. 1. Pressing the “NORMAL” button. • The screen changes as follows: Normal I => Normal II => Favourite => Normal I • The screen adjustment status changes as the following screens are displayed sequentially whenever pressing the “NORMAL” button.
Screen Adjustment When adjusting the screen to taste - You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc to the user’s taste. 1. Select “PICTURE” by pressing the “MENU” button. • The menu screen appears as follows. PR/PAGE PICTURE SELECT PICTURE MODE BRIGHTNESS CONTRAST COLOUR SHARPNESS TINT COLOUR TEMP PR/PAGE POSITION 2. Select and adjust each item. • Move to the PICTURE menu.
Screen Adjustment Adjustment of Screen Size in TV and AV mode - Randomly change the size of the screen. - The AUTO screen operates when power is first turned on. 1. Pressing the “ASPECT” button on the remote controller. • The screen changes as follows: Auto => 16:9 => 14:9 => 4:3 => Zoom 1 => Zoom 2 => Auto SCALE AUTO SCALE 16 : 9 SCALE ZOOM2 SCALE 14 : 9 SCALE 4:3 SCALE ZOOM1 • Auto : This mode will display depending on the signal information of a broadcasting station.
Screen Adjustment Adjustment of the screen in the PC mode PR/PAGE 1. Adjustment of the H-Position • Move to H-Position in the Screen menu. • Press the ” / ” buttons to adjust the horizontal position of displayed image. SCREEN SELECT SCALE H-POSITION V-POSITION PHASE CLOCK AUTO-ADJUST PR/PAGE POSITION 2. Adjustment of the V-Position • Move to V-Position in the Screen menu. • Press the ” / ” buttons to adjust the vertical position of displayed image.
Sound Adjustment When adjusting sound to taste - The user can enjoy various sounds by adjusting Sound Mode, Equalizer, Balance and Amp Speaker. 1. To adjust the audio equalizer • Move to Equalizer in the Sound menu. • Select and use the relevant frequency by pressing the ” / ” button. • You can adjust the degree of the frequency by using the ” / ” button. Note : • Whenever you adjust the audio equalizer, it stores in the Favourite mode.
Sound Adjustment Multi-Sound and Stereo 1. Mono Sound Selection • During Stereo sound reception if the stereo is weak, you can switch to ” button. Then the colour of “MONO” MONO by pressing the “ character will change to Red. In Mono reception the depth of sound is improved. ” button again. • To switch back to stereo, press the “ MTS Note : •“ MONO PR/PAGE SELECT MTS MONO ” only works in RF mode. 2.
Selection of Language Selection of Language When you first turn on the TV set, the window of language selection is displayed automatically. 1. Press the “MENU” button and select “Function”. PR/PAGE FUNCTION SELECT LANGUAGE TIMER CHILD LOCK MGDI DEMO OSD HALFTONE PR/PAGE POSITION OFF 0 ACCESS EXIT PR/PAGE 2. Select “Language” by pressing “ / ” button. FUNCTION SELECT LANGUAGE TIMER CHILD LOCK MGDI DEMO OSD HALFTONE PR/PAGE POSITION 3.
Adjustment of Time Adjustment of Time - You must previously adjust current time in order to reserve Automatic On/Off. 1. Manual clock setting • Move to Timer in the Function menu. • To go to the Clock, press the “ ” button. • Place the cursor to Hour / Minute with “ / ” buttons. • Set the Hour / Minute with the “ / ” buttons. • Place the cursor to Clock with “ / ” buttons and then press the “MENU” button to complete.
Adjustment of Time 3. Set up of Off Time • Move to Timer in the Function menu. • To go to the Off Timer, press the “ / ” button. • Select Off Timer to “Yes” • Set the Off time in the same way as above for the Clock. The set will turn off at the selected time. Note : • This function is very convenient since the TV automatically turns off at the fixed time 4.
Other Functions 1. Setup of Child Lock • Move to Child Lock in the Function menu. • Select Child Lock to “On” using the “ ” button PR/PAGE FUNCTION Note : • This prevents the use of the TV set without the remote control. • If TV set is set up Child Lock, LED will cycle through red/off for the ST-BY mode. • If the Child Lock is “On”, then the set can only be switched back on using the remote control. SELECT PR/PAGE POSITION 2. Setup of MGDI Demo • Move to MGDI Demo in the Function menu.
Teletext Teletext SWITCHING TELETEXT ON/OFF Press the “TEXT” button ( ). The index page or the page viewed last will appear. Press the “TEXT” button again to return to the TV mode. NOTE: Teletext works only in TV/AV mode. COLOUR BUTTONS IN TOP/FLOF TELETEXT A red, green, yellow and blue field is shown at the bottom of the screen. If TOP or FLOF Teletext is transmitted by the station, pressing the corresponding colour button R,G,Y,B on the remote controller, enables you to select the desired page easily.
Troubleshooting Symptoms and Solutions Please check the following list prior to calling Daewoo Electronics Service Centre for assistance. Symptom Check items Neither picture nor sound - Check the contact of sockets is all right. - Check the TV main power is on. Picture is OK but no sound - Check the Volume control is not set to minimum or mute. Sound is OK, but no colour. - Check the colour control and adjust it properly. - Check the program is in colour and not in black & white.
Troubleshooting In PC mode Symptom Check items “UNSUPPORTED” appears on the screen - Check the resolution and frequency of your PC. Then, adjust them to optimum condition for LCD TV. - Refer to the table of PC mode input format (If registered resolution and frequency on the table not listed then no picture will be displayed.) “NO SIGNAL” appears on the screen. - Ensure that the signal cable is firmly connected to PC and TV. Image is not clear. - Adjust the PHASE control. Image is not centered.
Standard of Product Screen Size 26”(66Cm) 32”(81Cm) Aspect Ratio Resolution Pixel Pitch Contrast Ratio Dimension (W x H x D) Power Consumption TV System 37”(94Cm) 16:9 1366 x 768 (WXGA) 0.4215 mm 0.51075 mm 0.600 mm 4000:1 5000:1 5000:1 676 x 530 x 230 mm 806 x 626.5 x 250 mm 940 x 720 x 328.5 mm Remarked in the back of product PAL B/G, D/K, I/I, SECAM B/G, D/K, L/L’, NTSC(AV) Power Source 220 -240V~, 50/60Hz ※ Owing to our policy of continuous improvement, specifications may change.
DMP39
