GB LCD TELEVISION INSTRUCTION MANUAL DLT-42U1/G1FH (FULL HD) DLT-46U1FH (FULL HD) DLT-42U1/G1HZ (100HZ) DLT-46U1HZ (100HZ)
Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute the risk of an electric shock.
Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain them safely for future reference. Follow all operations and instructions accordingly. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3.
Important Safeguards 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken from touching such power lines or circuits as contact with them might be fatal. 13. Overloading Do not overload wall outlets and extension leads as this can result in a risk of fire or electric shock. 14.
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. WARNING Ignoring or disregarding the contents of this section and improper operation of the product may result in the person’s death or serious injury. In case of an accident, please unplug the unit from the outlet immediately.
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. CAUTION Ignoring or disregarding the contents of this section and improper operation of the product may result in the person’s death or serious injury. Please keep the user’s manual in a safe place for future reference. Do not view the TV too closely since it may cause damage to your eyes.
Table of contents Installation and Maintenance Antenna Connection . . . . . . . . . . . . Video Connection . . . . . . . . . . . . . . Camcorder & Video Game Connection DVD Player Connection . . . . . . . . . . STB (Set Top Box) Connection . . . . . . PC Connection . . . . . . . . . . . . . . . . Cable TV Broadcasting Connection . . . Connect with the Dolby Digital AMP . . Name of Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supplied Accessories Make sure that the following accessories are provided with the product. AC lead Instruction manual R WE PO AL RM NO AV TE MU LTI MU DIA ME DVB /Ana PR E / PAG log L VO / OK ECT SEL PR L VO SUB TITL E E / PAG GE GUA LAN FAV OUR ITE ECT ASP CT FFE S.E NU IDE ME GU M T EL / EXI I GH ALL REC NC CA 3 R PQ DEF 2 C AB O MN 1 6 . YZ& 5 9 EP SLE X VW JKL 8 4 STU 0 7 LL STI E SIZ CEL AN EX T.C IND EAL REV MIX T TEX LD R▲ P.P P WA P.
Antenna Connection Indoor Antenna Connection Not recommended unless very close to the transmitter Not recommended unless very close to the transmitter. 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of a wrong antenna connection. Be sure to check its direction and site when installing. combining adapter 2. Connect the combining adapter to the antenna input at the left side of the TV set.
Antenna Connection CTV Antenna Connection Such community TV Antenna installation may be found in most of communial apartments. When a coaxial cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right.
Antenna Connection Outdoor Antenna Connection An outdoor Antenna connection-such as VHF and/or UHF-may be necessary for installation in private houses. Single Antenna Connection Left side of the tv set VHF Antenna UHF Antenna ANT/CABLE Separate Antenna Connection.
Video Connection Connecting with an External Source R - AUDIO - L AV 3 S-Video VIDEO S-VIDEO You may connect an S-Video input to enjoy clearer and brighter picture images. You can make the connection with the AV3 input. Note : If S-video and the RCA phono jacks are connected at the same time, the TV set will only detect the S-Video mode. • If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is recommended for better picture quality.
Camcorder & Video Game Connection Watching a Camcorder Recording on TV or playing a Video Game 1. Prepare the S-video and RCA connector. 2. These connectors connect to S-video or AV 3 as shown in the picture below. 3. Turn on the TV set and camcorder/video game. 4. Select AV3/S-video mode, using the ”AV” button of the Remote controller or “ ” button of the TV set.
DVD player connection When connecting with a component cable or Euro SCART cable HDMI 1 INPUT OPTICAL UP-GRADE PORT HDMI 2 INPUT COMPONENT Pr Pb PC INPUT Y PC AUDIO R - AUDIO - L Back of the tv set DVD Note : • You can use a scart cable but some DVD’s have a component output for a better picture. • When you connect with a component video, output from your DVD player to the TV please check that the colour of the cables between the DVD and TV set. Matches the sockets on both appliance.
STB (Set Top Box) connection When connecting with a SCART cable Back of the tv set HDMI 1 INPUT OPTICAL UP-GRADE PORT HDMI 2 INPUT COMPONENT Pr Pb PC INPUT PC AUDIO R - AUDIO - L Set Top Box 15 Y
PC Connection When connecting with PC(D-Sub) cable. 1. First adjust resolution of the PC (640 x 480, 800 x 600, 1024 x 768, 1360 x 768(Only 100hz models), 1280 x 1024 (Only Full HD models)). 2. Then disconnect your monitor from your PC and connect between PC and TV set using the D-sub and Audio cable as shown in the picture below. 3. Turn on the PC and TV set. 4. Select PC mode by pressing the “MULTIMEDIA” button on the remote control or ” ” button of the TV set.
PC Connection PC CONNECTION NOTES: 1) If there is a [Vertical Frequency] setting menu in the [Display] Menu of the PC, adjust the frequency to 60Hz. 2) If the PC resolution is too high, it may be hard to read letters. Select a suitable resolution. 3) HDMI input port receives only Digital Signals. 4) Depending on the graphic card when you plug & unplug the HDMI connection the screen may not display correctly. Restart the computer if this happens. Multi input resolution available in LCD TV (FULL HD).
Cable TV Broadcasting Connection External Input Connection Source Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. You may make the connection to either the Component input or SCART input AV1 or AV2.
Connect with the Dolby Digital AMP. If you connect the optical output to a Dolby digital AMP, you can listen to surround sound.
Name of Each Part Front Panel (DLT-42U1 / DLT-46U1 / DLT-42U2) The buttons on the TV set have the same functions as those of the remote control. Touch Buttons . ① Button : Each time you press this button, the TV will cycle through: TV/DVB/AV1/AV2/AV3(S-Video)/PC/HDMI 1/ HDMI 2/ Component/ TV ② Buttons : Use these buttons to change your TV’s volume or to move the cursor in the menu. ③ Buttons : Use these buttons to change channels on your TV or to move the cursor in the menu.
Name of Each Part Front / Side Panel (DLT-42G1) The buttons on the TV set have the same functions as those of the remote control. Control Key Buttons. ① Button : Each time you press this button, the TV will cycle through: TV/DVB/AV1/AV2/AV3(S-Video)/PC/HDMI 1/ HDMI 2/ Component/ TV ② MENU Button : Use this button to enter and exit the MENU. ③ VOL Buttons : Use these buttons to change your TV’s volume or to move the cursor in the menu.
Name of Each Part Side and Rear Panel Rear Panel HDMI 1 INPUT OPTICAL UP-GRADE PORT HDMI 2 INPUT COMPONENT Pr Pb PC AUDIO VIDEO S-VIDEO AV 3 R - AUDIO - L R - AUDIO - L PC INPUT 22 Y
Parts of the Remote Controller MUTE DVB/Analog POWER MULTI MEDIA AV 1. (MUTE) : Press this button, and the sound goes off. Press again, and the sound returns. 2. (POWER) : TV on/off button in STANDBY mode. NORMAL VOL PR / PAGE 3. DVB/Analogue : Each time you press this button, the TV will toggle between DVB & RF Analogue. 4. MULTIMEDIA : Each time you press this button, the TV will cycle through: PC HDMI1 HDMI2 COMPONENT PC OK / SELECT 5.
Parts of the Remote Controller MUTE DVB/Analog POWER MULTI MEDIA AV NORMAL VOL PR / PAGE OK / SELECT PR / PAGE VOL 22. NUMBER : Press the numbers on this board, you can select programmes directly in TV mode. Note : When the current state is ST-BY, you can turn on the TV using the digit key. Then a PROGRAMME is selected according to digit number. 23. STILL : Press this button to freeze the picture. Note :„STILL” function is not available in PC mode and PC resolution of HDMI mode. 24.
Method To Use Basic Menu Basic Menu - The basic menu appears on the screen if you press the menu button of the remote control. - There are 6 items Picture, Screen, Sound, Function, Install and DVB in the basic menu. - Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward. 1. Press the “MENU” button. • The main menu appears.
To Watch TV On/Off, Number, Mute, Recall, / / / Buttons with same name in the main body of the TV perform the same function. MUTE Press the “ON/OFF” button on the front/side of the set or Remote controller • The buttons on the remote control and the main body operate only when AC power is turned on. Note : You can also turn on the TV using “ PR ” key and number buttons when in the ST-BY mode.
To Watch TV - If the AV1 terminal on the TV set is connected with an external device, which is switched on, the TV will come ON in AV1 mode. Otherwise, TV will come ON in RF mode. 1. Turning on the TV. • Plug the AC lead into a power outlet. • 42G1 : The Stand By LED lamp turns on in red. 42U1 & 46U1 : VFD displays the text “Stand By”. ” button of the main body or “POWER” but• Press “ ton on the remote control.
Setting Up TV Stations Auto Tuning - All stations that can be received are stored by this method. It is recommended that you use Auto tuning during the installation of this set. VOL 1. Press the “MENU” button to select the Install menu. • Move the selection bar to the Install menu with “ / ” buttons. PR / PAGE Picture OK / SELECT VOL Mode Screen PR / PAGE Sound Dynamic Brightness 41 Contrast 51 Colour 31 Function Sharpness Install Tint 31 R G Colour Temp Normal DVB Position VOL 2.
Setting Up TV Stations Manual tuning 1. Press the Number buttons(0~9) or the “ PR ” button to select a programme number you want. VOL PR / PAGE OK / SELECT 2. Locate the selection bar on the Manual tuning at the Install menu. • Press the “MENU” button to select the Install menu. • Move the selection bar to the Install menu with “ / ” buttons. • Place the selection bar on Manual Tuning and press the “ ” button.
Setting Up TV Stations Setup VOL The Setup menu shows you information as follows: - Channel, Name, System, Sound, Fine Tuning. PR / PAGE Picture OK / SELECT Screen Auto Tuning Manual Tuning Setup VOL PR / PAGE Sound Edit Function 1. Searching for channels in the Setup menu. • Press the “ PR “ buttons to select a program number you want. • Move to Setup in the Install menu. • Select the colour and sound system which you want. • Search a real channel with “ / “ buttons.
Setting Up TV Stations Edit The Edit menu shows you information as follows: - Program position assignment: Program number and Station name, Real channel number. - Skip information: Red (Skip Yes), White (Skip No). 1. Deleting the program positions. • Move to Edit in the Install menu. • Move the selection bar to the program number to delete with the “ / ” and “ / ” buttons. • Press the Delete (Yellow) button. VOL PR / PAGE Edit OK / SELECT VOL PR / PAGE Pr 91 92 93 94 95 96 97 98 99 00 Ch.
Selection of AV and Multimedia Input Signal When watching video, Camcorder, DVD, Cable TV with AV - See 12 page for connection method of TV and “Video”. - When pressing ” ” button on the TV set, screen changes as follows: TV DVB AV1 AV2 AV3(S-Video) PC HDMI 1 HDMI 2 Component TV 1. Pressing the “AV” button on the remote control.
Selection of AV and Multimedia Input Signal When connecting PC, STB, DVD with Multimedia 1. Pressing the “MULTIMEDIA” button on the remote control. • The screen changes as follows: PC HDMI 1 HDMI 2 Component PC MUTE DVB/Analog POWER MULTI MEDIA AV VOL NORMAL PR / PAGE OK / PC HDMI 1 Clock 1 2 : 0 0 Clock 1 2 : 0 0 COMPONENT HDMI 2 Clock 1 2 : 0 0 Clock 1 2 : 0 0 HDMI & PC mode 1.
Screen Adjustment When setting up various screen modes - The user may select various screens designed for a good picture without adjusting the brightness, contrast or colour individually. 1. Pressing the “NORMAL” button. • The screen changes as follows: Normal Movie Dynamic Favourite Normal • The screen adjustment status changes as the following screens are displayed sequentially whenever pressing the “NORMAL” button.
Screen Adjustment When adjusting the screen to taste - You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc to the user’s taste. 1. Select “PICTURE” by pressing the “MENU” button. • The menu screen appears as follows. VOL PR / PAGE Picture OK / SELECT VOL Screen PR / PAGE Sound Function Install Mode Dynamic Brightness 41 Contrast 51 Colour 31 Sharpness 31 Tint R G Colour Temp 0 Normal DVB Position 2. Select and adjust each item.
Screen Adjustment Adjustment of Screen Size in TV and AV mode - Randomly change the size of the screen. - The AUTO screen operates when power is first turned on. GUIDE SUBTITLE LANGUAGE FAVOURITE CANCEL / EXIT 1. Pressing the “ASPECT” button on the remote control. • The screen changes as follows: 16:9 14:9 4:3 Zoom 1 Zoom 2 Auto 16:9 14:9 Aspect 16:9 Aspect Auto ASPECT M ABC Aspect MENU RECALL S.
Screen Adjustment Adjustment of the screen in the PC mode 1. Adjustment of the H.Position • Move to H.Position in the Screen menu. • Press the ” / ” buttons to adjust the horizontal position of displayed image. VOL PR / PAGE OK / SELECT VOL PR / PAGE Picture Aspect Screen H. Position Sound Function 0 V. Position 0 Phase 2 Auto Install DVB Position 2. Adjustment of the V.Position • Move to V.Position in the Screen menu.
PIP & POP mode 1. PIP & POP mode when main picture is TV and AV. • Press the “P.MODE” button, then POP mode will function. • Press the “P.STILL” button, then Sub screen will freeze. • If you want to swap main for the Sub, press the “P.SWAP” button. • If you want to change the sub screen input, press the “P.INPUT” button. Sub screen changes as follows: HDMI 1 HDMI 2 HDMI 1 2. POP mode when main picture is Multimedia. • Press the “P.MODE” button, then POP mode will function. • Press the “P.
Sound Adjustment When selecting various sound modes 1. Sound mode selects what you want. • Press the“Menu”button and locate the cursor the sound mode. • Press the ” / ” button to select the sound Mode.
Sound Adjustment When adjusting sound to taste - The user can enjoy various the sounds by adjusting Sound Mode, Equaliser, Virtual Dolby, Dynamic Bass and Balance VOL 1. To adjust the audio equaliser. • Move to Equaliser in the Sound menu. • Select and use the relevant frequency by pressingthe ” / ” button. • You can adjust the degree of the frequency by using the ” / ” button. Note : • Whenever you adjust the audio equaliser, it stores in the Favourite mode.
Sound Adjustment Multi-Sound and Stereo 1. Mono Sound Selection • During Stereo sound reception if the stereo is weak, you can switch to MONO by pressing the “ ” button. Then the colour of “MONO” character will change to Red. In Mono reception the depth of sound is improved. ” button again. • To switch back to stereo, press the “ M RECALL S.EFFECT ABC DEF GHI 1 2 3 JKL MNO PQR 4 5 6 STU VWX YZ&.
Selection of Language Selection of Language When you first turn on the TV set, the on screen display of language selection is displayed automatically. 1. Press the “MENU” button and select “Function”. VOL PR / PAGE Picture OK / SELECT VOL Screen PR / PAGE Sound Language Timer Child Lock Off NR Off Function MGDI DEMO Install VFD On DVB Position VOL 2. Select “Language” by pressing “ / ” button.
Adjustment of Time Adjustment of Time - You must previously adjust current time in order to make the Automatic On/Off function to opperate. 1. Setting the Clock. • Move to Timer in the Function menu. • To go to the Clock, press the “ ” button. • Place the cursor to Hour / Minute with “ / ” buttons. • Set the Hour / Minute with the “ / ” buttons. • Place the cursor to Clock with “ / ” buttons and then press the “MENU” button to complete. 2. Automatic clock setting and correction.
Adjustment of Time 4. Set up of Off Time. • Move to Timer in the Function menu. • To go to the Off Timer, press the “ / ” button. • Select Off Timer to “Yes”. • Set the Off time in the same way as above for the Clock. The set will turn off at the selected time.
Other Functions 1. Setup of Child Lock. • Move to Child Lock in the Function menu. • Select Child Lock to “On” using the “ / ” button. VOL PR / PAGE Picture OK / SELECT VOL Note : • This prevents the use of the TV set without the remote control. • If TV is set to Child Lock mode, the LED will cycle through red/blue for the ST-BY mode (42G1 only). • If the Child Lock is “On”, then the set can only be switched back on using the remote control.
Teletext Analogue Teletext SWITCHING TELETEXT ON/OFF Press the “TEXT” button ( ). The index page or the page viewed last will appear. Press the “TEXT” button again to return to the TV mode. Note : Teletext works only in TV/AV mode. However digital broadcasts have digital text. To use digital text press the “TEXT” button when in DVB mode and follow the instructions on the screen to select pages. For analogue text use the COLOUR BUTTONS in TOP (Tables Of Pages) NB.
DVB menu DVB Menu DVB MENU - Press the Menu button to display the main menu.Then, select DVB MENU. You may see the DVB MENU OSD. Whenever you need more information during any DVB MENU directory, press info button “ ” then you will see more detailed information on the screen. And in some menus, you can use the cyan, yellow, red, green buttons. Those buttons’ function depend on which menu it is. * This menu is activated only on digital mode.
DVB menu Channel List Channel List 1. BBC ONE 2. BBC TWO 3. ITV 1 4. Channel 4 5. five 1 6. ... Select Function Move Delete BBC ONE Edit Name Select Channel Select Lock Watch Favourites i More - Select the MOVE function to change the channel number and press the OK. Enter the new number you want and press the OK button. If the number you are selecting is already memorised for another channel, a warning message will appear on screen. Channel exist.
DVB menu Favourites Edit Favourite Lists 1. BBC ONE ① 2. BBC TWO ① ② 3. ITV 1 4. Channel 4 5. five ② ① ② 6. ... 1 List 1 Select List List 2 BBC ONE List 3 Select Channel List 4 Select Add/Remove List 5 i More - This menu allows you to make your favourite channel list. You can make 5 favourite lists. - Move highlight on any list (1~5). Then press the Select key to make your own list. When you press the Select key, the mark (①②③④⑤) will show up on the channel name’s right side.
DVB menu Guides Select each sub-menus. Guides Now / Next EPG Now / Next EPG - You can check now / next program here. Move highlight up/ down and get information. - Yellow/cyan button is for changing the schedule. List Schedule EPG - Press Info key “ gram Timeline Schedule EPG ” to see detailed information of each proMENU Exit SELECT Select Now / Next EPG Wed 10/11 10:00 Channels Current Event Next Event 23. bid - up.tv 25. TCM 26. UK Style 27. Discovery 28. DiscoveryH&L 30. ITV4 32.
DVB menu List Schedule EPG - You can check program schedules here. Navigate channel by pressing UP/DOWN/RIGHT/ LEFT button. - Press Yellow/cyan buttons to change date. Red/green buttons are for changing the time. - Press Info key “ ” to see detailed information of each program Electronic Programme Guide Wed 10/11 8:00 BBC ONE Wed 10/11 8:00-10:00 1. BBC ONE 2. BBC TWO 3. ITV 1 4. CHANNEL 4 5. FIVE 6. ITV2 8. 8 10. ITV3 13.
DVB menu Timers - If you want to watch a special program on time without having to use the remote everyday, please setup Timers. - At first, press select key. You will see time setup OSD. (See the right) - You can change channel at Name. - Setting start/end time as you want at Start / End. - Select Mode (Once, Daily, Weekly) - If a channel is set to change to LOCKed channel, password OSD will be displayed before channel changing.
DVB menu Settings Select each sub-menu Setting Configuration This has 6 sub-menus. Configuration - Change Time Zone : GMT - CET Language - Subtitle on/off You can also control this with the remote control SUB TITLE button. Installation Note: You can select sub title language in the Features menu. - Change Banner time : MENU Exit off - 1 sec - 2sec - 4sec - 8sec SELECT Select - You can choose your favourite list (see page 49) in Favourite Mode. If it is selected as off, all channels are shown.
DVB menu Language - System : Select some language, then OSD is displayed in that language: English German French Italian Spanish Danish Polish Norwegian Swedish Finnish Portuguese Dutch. - Preferred : has two sub menus. Audio is change the audio sound in selected language. Subtitle is change the subtitle display in selected language: English German French Italian Spanish Danish Polish Norwegian Swedish Finnish Portuguese Dutch Catalan.
DVB menu Manual Search Channel Number 44 Signal Quality: Very Good Signal Level: 0 .. 9 Select Channel Select Search Menu Exit i More Common Interface - This allows you to upgrade your TV set with additional features including access to extra channels (if available) using a conditional access module (eg. TopUp TV). - If there is no CI Card in the slot,„No common interface module detected” appears on the screen. - When you insert the CI Card,„Common interface module inserted” appears on the screen.
Troubleshooting Symptoms and Solutions Please check the following list prior to calling Daewoo Electronics Customer Service Centre for assistance. Symptom Check items Neither picture nor sound - Check the contact of sockets is OK. - Check the TV main power is on. Picture is OK but no sound - Check the Volume control is not set to minimum or mute. Sound is OK, but no colour. - Check the colour control and adjust it properly. - Check the program is in colour and not in black & white.
Troubleshooting In PC mode Symptom Check items “OUT OF RANGE” appears on the screen - Check the resolution and frequency of your PC. Then, adjust them to optimum condition for LCD TV. - Refer to the table of PC mode input format (If registered resolution and frequency on the table not listed then no picture will be displayed.) “NO SIGNAL” appears on the screen. - Ensure that the signal cable is firmly connected to PC and TV. Image is not clear. - Adjust the PHASE control. Image is not centred.
Standard of Product Model LCD Panel Screen Size Aspect Ratio Resolution Pixel Pitch Contrast Ratio Set Dimmension Dimmension (W x H x D) Power Consumption Typ. TV System Power Source Model LCD Panel Screen Size Aspect Ratio Resolution Pixel Pitch Contrast Ratio Set Dimmension Dimmension (W x H x D) Power Consumption Typ. TV System Power Source DLT-42U1/G1FH DLT-46U1FH 42” 46” 16:9 16:9 1920 X 1080 (Full HD) 1920 X 1080 (Full HD) 0.53x0.17 0.1767X0.1767 6000:1 6000:1 1044 x 692 (757) x 124.