DPB-10000P 10” LCD TV AND DVD PLAYER ACCESSORIES: 1 x AC to DC Adaptor 1 x Remote Control with battery 1 x Instruction Manual 1 x Audio/Video Adaptor 1 x Cigarette Lighter Adaptor Downloaded From Disc-Player.
Contents A. INTRODUCTION 3 B. CAUTIONS AND WARNINGS 3 C. POWERING AND INSTALLATION 6 D. UNIT 6 VIEW E. REMOTE CONTROL VIEW 9 F. Menu 10 G. SETUP 14 H. Display 15 I. Playing Audio CDs 17 J. Playing MP3 Discs 17 K. Playing JPG file 18 L. SPECIFICATIONS 19 M. TROUBLE SHOOTING DVD MODE 19 N.TROUBLE SHOOTING TV MODE 20 Downloaded From Disc-Player.
A. INTRODUCTION Thank you for choosing the 10” LCD TV and DVD player. Please read the entire instruction manual supplied with this product prior to using. The documentation will assist you in installing the system properly to obtain the best equipment performance. Please save this manual for later use. B. CAUTIONS AND WARNINGS 1 Placement To prevent fire or electric shock, do not expose this appliance to rain or moisture.
Disassemble Do not attempt to disassemble the cabinet. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified service personnel if your system needs repair. 5 Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
C. POWERING AND INSTALLATION 1. Powering the system indoors Plug one end of the AC to DC Adaptor into the DC jack on the side of the LCD TV and DVD player, then plug the other end into the 110~240V AC power outlet. 2. Powering the system in a car Plug one end of the cigarette lighter Adaptor into the DC jack on the player, and then plug the other end into the cigarette lighter socket. NOTE: Unplug the apparatus from the power source when not in use for an extended period of time. D. UNIT VIEW 1.
2. TOP OF LCD TV AND DVD PLAYER 1) Power Button: Turns on or off the unit. 2) Program Buttons: Press to scan the program channels automatically. (You can press it with tiny and sharp object. The tiny design is to prevent you from pressing it carelessly.) 3) PR- Button: To select the previous channel. 4) PR+ Button: To select the next channel. 5) Volume- Button: Turns down the volume. 6) Volume+ Button: Turns up the volume. 7) Picture Button: Adjusts Brightness/Contrast/Colour.
3. LEFT OF LCD TV AND DVD PLAYER 1) TV Jack: Insert an antenna into the jack. 2) E-Port: Connect with Game Pad. 3) SD/MMC/MS Slot: Insert an SD/MMC/MS Card into the slot. 4) USB Jack: Insert a USB Flash Driver into the jack. 5) AV Input Jack: Insert the A/V cable to extra device. 6) AV Output Jack: Insert the A/V cable to TV or another monitor. 7) Earphone Jack: Insert earphone for private listening. The speakers mute. 8) DC Jack: Insert either the AC Adaptor or the vehicle Adaptor.
E. REMOTE CONTROL VIEW 1) DVD/TV/AUX: selects either DVD, TV, AV or E-Port mode. 2) Power: Press to power on or off. 3) Display: Press to display disc information. 4) Audio: Selects one of the audio soundtracks. 5) Subtitle: Selects one of the subtitle languages programmed on a DVD. 6) FF: Scan forward at 2,4,8,16,32 times speed. 7) REW: Scan reverse at 2,4,8,16,32 times speed. 8) Skip+: Skip to the next titles, chapters, or tracks. 9) Skip-:Skip to the previous titles, chapters, or tracks.
menu screen. 22) Stop: Stops playback. 23) Volume+: Turns up the volume. 24) PR+: Selects next channel. 25) PR-: Selects previous channel. 26) System: Select different TV system modes. F. Menu DVD Mode: A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the menu.
BAND: Displays the frequency band (VHF-L/VHF-H/UHF) of the current channels. G. SETUP 1. General Setup Page 1) In DVD mode with no disc inside the player, press ‘SETUP’ to display the main screen of the Setup Menu on the screen and “General Setup Page” appears. Press ‘SETUP’ again to exit the Setup Menu and the unit will resume to its last playback mode. 2) Press the ENTER button, “TV Display” is highlighted. 3) Press the UP or DOWN button to select the other menus in the general setup page.
NOTE: Not all discs contain above features. The above features are disc dependent. c). OSD Language Please To select any language which you desire as the OSD (on screen display) Language. d). Screen Saver *On: Enables screen saver *NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen.*Off: Disables screen saver (off) e). Last Memory *On: The unit will returns to the last position on the disc.
3) Press the UP or DOWN button to select the other menus in the preference page. 4) Press RIGHT to enter the sub menu. 5) Press the UP or DOWN button to select the sub menu and press the ENTER to confirm your selection. 6) Repeat steps 3-5 for other menus. Note: Press RIGHT to return the previous menu. a) Audio b) Subtitle c) Disc Menu NOTE: Language and subtitle selection is only available for discs that are recorded in various languages.
NOTE: The level of 8 Adult is the factory default. e) Default Select ‘Default’ by pressing the UP or DOWN button in the preference page. And press RIGHT to enter the sub menu. Press ENTER to make the setting returns to the factory-set mode. NOTE: The parental setting is not affected by the default reset function. The master password is 3308. This password is always effective even after you have selected your own password and changed it.
Title Remain: The remaining time of the title Chapter Elapsed: The elapsed time of the chapter Chapter Remain: The remaining time of the chapter Display Off: The DVD’s time Information will not be displayed. 2. SUBTITLE During disc playback press ‘SUBTITLE’ to select the subtitle language you desire*, with the current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language.
4. REPEAT a. During playback press ‘1/All Repeat’ constantly to see the repeat mode. Chapter: Repeat the current chapter Title: Repeat the current title All: Repeat all chapters and titles Repeat Off: Resume normal playback The ‘Chapter’ repeat display is shown below for example: I. Playing Audio CDs When playing an audio CD press the DISPLAY button constantly on the remote to view time information.
has been playing. 4) Total Remain: The current track playing and the amount of time remaining on the CD. 5) Display Off: The CD time Information will not be displayed. J. Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song is compressed into the MP3 format with very little loss of audio quality while taking up much less disc space. CD-R /RW discs that have been encoded in MP3 format are compatible with this system.
hand icon will appear on the display meaning that these options are not available. L.SPECIFICATIONS Compatible DISC: DVD/CD/MP3/JPEG Signal system: PAL Panel size: 10 inch Audio S/N: Better than 60 dB Dynamic range: Better than 85 dB Power source: DC 12V Operating temperature: 5~35°C Weight : 1.677 kg Dimensions (W x D x H): 335 x 180 x 60 mm Design and specifications are subject to change for product improvement without notice. M.
1. The disc might be damaged. Try another disc. 2. It is normal for some distortion to appear during forward or reverse scan. No forward or reverse scan? 1. Some discs have sections that prohibit rapid scanning or title and chapter skip. 2. If you try to skip through the warning information and credits at the beginning of a movie, you won’t be able to. This part of the movie is often programmed to prohibit skipping through it. Remote control inoperative? 1. Verify that the batteries in the remote are fresh.
There is no sound when enjoying the program? 1. Turns up the volume. 2. Check the mode of MUTE is Off. 3. Confirm the system of TV (PAL-I,PAL-BG or PAL-DK) Picture is snowy The aerial is inadequate use an outdoor antenna to improve reception. Picture is ghosting Orientate this aerial to improve the picture. Remove control inoperative 1. Verify that the batteries are flesh 2. Verify the remote sensor on the TV is not obstructed 3.
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. Downloaded From Disc-Player.
