Owner’s Manual ENGLISH DVD RECORDER DQR-1000D/DQR-1100D P/N : 97P95600D0-U2 Downloaded From Disc-Player.
Safety Instructions PRODUCT INFORMATION Please keep the DVD Recorder’s guarantee sheet and receipt in a safe place. Precautions • Read this booklet carefully. • Make sure the rating of your household electricity supply matches that shown on the back of your DVD Recorder. • Read this page and chapter “Setting up your DVD Recorder” to help you set up and adjust your product correctly. • Do not put the DVD Recorder in a hot or humid place. • Do not open the DVD Recorder.
Before you use your DVD recorder Before you use your DVD recorder Which discs you can use The following discs can be used in your DVD recorder for playback and recording: DVD (Digital Versatile Disc) is a new storage medium that combines the convenience of the compact disc with the latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc.
Contents Identification of Controls Recording Manual recording______________________________33 PRODUCT INFORMATION Product Information Safety Instructions _____________________________1 Before you use your DVD recorder ____________2 Contents _______________________________________4 Identification of Controls_______________________5 Front panel General information ! @# $ Recording without automatic switch off % ^ & *() Interrupt recording (Pause) Recording with automatic switch off (OTR) Protectin
Identification of Controls PRODUCT INFORMATION Operation Display Window Identification of Controls Rear panel ! @ # & * $ % ^ REC and TIMER REC display To be Timer-recorded Recording TIMER Recording /OTR (One Touch Recording) ( TITLE Displays the title number selected/played (DVD) ! Mains socket CHAPTER Connection to the mains supply Displays the chapter selected/played @ Aerial input Time, Counter and Current Operation Connection of the aerial Tray is opened Tray is closed Disc is loa
Identification of Controls Identification of Controls PRODUCT INFORMATION Remote Control [TV] TV Mute [TV, DVD] To switch set on or off, interrupt menu function, interrupt a programmed recording (TIMER) [DVD] Next/Previous programme number [DVD] Select previous title/search backwards : • Briefly press the button during playback: Previous chapter/film or previous title [TV] TV mode select • Hold down the button: Search backwards [DVD] Switches the scart socket EURO AV2 directly to the TV set.
Identification of Controls Identification of Controls Instructions in using remote control 1 2 3 4 5 Turn on the TV. • Operate remote control within 7m from the unit. Point the DVR's remote at the TV. • Do not press 2 (two) buttons at the same time. Holding the TV button down, press the two numbers listed below that is relevant to your brand of TV. • Do not allow bright light to fall directly on the sending part of remote control.
Connecting your DVD recorder to the TV set Connecting your DVD recorder to the TV set The necessary cable connections must be made before you can record or playback TV programmes using your DVD recorder. Connect the DVD recorder directly to your TV set. If there is a video recorder in between, the picture quality may be poor because of the copy protection system built into the DVD recorder. We recommend that you use a scart cable to connect your TV set and DVD recorder.
Connecting additional devices Connecting additional devices to the second scart socket You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the EURO AV2 socket. When playback is started on this additional device the DVD recorder automatically connects the EURO AV2 scart socket with the EURO AV1 scart socket. You will then see the picture from the additional device on your TV set, even if the DVD recorder is switched off.
Installing your DVD recorder Installing your DVD recorder Initial installation After successfully connecting your DVD recorder to the TV set and other additional devices, this chapter will show you how to start the initial installation. On screen menu? The multi-language on-screen menu takes the mystery out of using your new DVD recorder. All settings and/or functions are displayed on your TV screen in the relevant language. The DVD recorder automatically seeks out and stores all available TV channels.
Installing your DVD recorder Installing your DVD recorder Automatic TV channel search (Autoinstall) Manual TV channel search During installation, all available TV channels are searched for and stored. If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the DVD recorder, e.g. after moving house, you can start this procedure again. This will replace the stored TV channels with the new ones.
Installing your DVD recorder Installing your DVD recorder Sorting and clearing TV channels manually Setting the time and date After you have performed the automatic channel search you may not agree with the sequence in which the individual TV channels have been allocated to the programme positions (programme numbers). You can use this function to rearrange the TV channels already stored or to delete TV channels you don't want or those with poor reception.
Information on the TV screen Information on the TV screen Icons in the menu bar Status box You can check and change many of the features and settings on your DVD recorder using the system menu. The menu bar cannot be displayed during recording. The status box displays the current operating mode (status) of the DVD recorder and the current disc type. This display can be switched off. Use the [SYSTEM MENU] button to call up and close the menu bar (main menu).
Playback Playback Playing a DVD video disc Inserting a disc 1 Press the [OPEN/CLOSE] button on the front of the DVD recorder. The disc tray opens. 2 Insert the disc carefully into the tray, with the label uppermost and press [PLAY/PAUSE] or [OPEN/CLOSE] on the front. The information on the disc is read. 3 Playback begins automatically. How to insert a double sided DVD Double-sided discs are not printed on either side. The labelling is in the centre on each side of the disc.
Playback Playing a DVD+RW/+R disc Playback Playing an MP3 CD 1 If the disc is write-protected or a finalised DVD+R disc, playback starts automatically. 2 If playback does not start automatically, select the title you want to watch from the Index Picture Screen using [†] or […]. You can also use the [§] or [∞] buttons on the front of the set. 3 Press [PLAY/PAUSE]. The display shows: title number. 4 To stop the disc, press [STOP].
Playback Additional playback features Playing a (Super) Video CD Changing to another title/chapter (Super) Video CDs may be equipped with PBC (Play Back Control). This means that special playback functions (menus) can be directly selected. The Video CD must be PBC-compatible (see CD packaging). 'PBC' is turned on by default. If there is more than one title or chapter on the disc, follow the instructions to change to another title or chapter.
Additional playback features Additional playback features Search by time Scan feature Using this feature you can select where playback should start (select elapsed time). This feature plays back the first 10 seconds of each chapter (DVD) or track (CD). 1 During playback press [SYSTEM MENU] on the remote control. The menu bar will appear at the top of the screen. 1 During playback, press [PLAY MODE]. Select ' MODE]. 2 Select the ' ' symbol using […] or [†] and confirm with [√].
Additional playback features Manual recording Changing the audio language General information Pre-recorded DVD videos often come with multiple audio languages. Playback uses the language you selected during initial installation. You can change the audio language of the current disc at any time. Use the 'Manual recording' feature to spontaneously start recording (e.g. to record a TV show already in progress).
Manual recording Manual recording Recording without automatic switch off 1 Switch on the TV set. If required, select the programme number for the DVD recorder. 2 Insert a disc to be used for the recording. The system and content of the disc will be checked. 'READING' will appear on the display. 3 If necessary, switch to the internal tuner on the DVD recorder using the [OUTPUT] button on the remote control. 4 Select the programme number (station name) you wish to record using [PR +] or [PR –].
Manual recording Manual recording Protecting the disc against accidental recording Lining up recordings within a title (assemble cut) To prevent an important recording from being accidentally erased, you can protect the entire disc. You can only protect the disc as a whole. It is not possible to protect an individual recording. Setting for DAEWOO DVD+RW DIsc name Protection Erase disc DAEWOO DVDRW œUnprotected Protected 1 Insert the disc you wish to protect.
Manual recording Manual recording Selecting the recording mode (quality) Automatic recording from a satellite receiver (Sat Recording) By selecting a recording mode, you define the picture quality of recordings and the maximum recording time for a disc. You can check the quality by switching to a recording mode and then watch the picture via the built-in tuner ([OUTPUT] button).
Managing the disc contents Managing the disc contents General Information Editing recording titles (name) When a recording is made to disc, the following additional information is also stored at the beginning of the recording: Some TV stations transmit the title (name) of a programme. In this case, the name will be included automatically (e.g. 'ROCKY'). Otherwise, the channel number and time of the recording are stored as the name.
Managing the disc contents Managing the disc contents Erasing a recording/title Disc settings You can erase individual recordings from a disc. Follow the instructions below: This screen appears before the first title and contains general information about the current disc. Setting for title P01 08:48 Name Play full title œ Erase this title P01ab*CW46 1 Press the [STOP] button or during playback press [DISC MENU]. 2 Using […] or [†] select the title to be erased and confirm with [√].
Managing the disc contents Managing the disc contents Edit Menu Finalising DVD+R discs This feature is required to play back a DVD+R disc in a DVD player. Once the disc has been finalised no further recordings or changes can be made. 1 In the Disc Info screen press [√]. The 'Settings for' menu appears on the TV screen. DAEWOO DVDRW Protected 2 Select 'Finalise disc' using […] or [†] and confirm with [√]. Press OK 3 The screen displays 'This will take ...' to show how long the process will last.
Managing the disc contents Programming a recording (TIMER) General information Erasing chapter markers Use programmed recording (TIMER) to automatically start and stop a recording at a later date. You can erase all or some of the markers within a title . The DVD recorder will switch to the right program number and begin recording at the correct time. 1 During playback of the appropriate chapter press [EDIT] on the remote control. The 'Edit Menu' menu will appear on the screen.
Programming a recording (TIMER) Programming a recording (with the ShowView System) Programming a recording (TIMER) Programming a recording (without the ShowView System) Thanks to this programming system, you no longer need to tediously enter the date, programme number, start and end time. All the information needed by the DVD recorder for programming is contained in the ShowView programming number. This ShowView number is found in most TV listings.
Programming a recording (TIMER) How to check, change or delete a programmed recording (TIMER) 1 Timer ShowView system … Timer programming ◆√Timer List † √ To store Press OK Timer Timer List In this section you will learn how to set your user preferences on the DVD recorder. The symbols have the following meanings: Sound Switch on the TV set. If required, select the programme number for the DVD recorder. Picture Feature Language Installation Recording 2 Press [TIMER] on the remote control.
User preferences Sound settings User preferences Language settings Depending on which audio outputs are used, you can select the settings in this menu. Sound ----- Digital output √All Analogue output Stereo Night mode Off If you only use the analogue audio output ( AUDIO L/R ), select the settings ‘Off' in the 'Digital output' menu.
User preferences Access control Parental level control (DVD video only) PBC This line appears only if a VCD is loaded. This function lets you activate or deactivate the PBC menu (Playback Control) for video CDs. See 'Playing a (Super) Video CD'. Films on pre-recorded DVD discs may contain scenes not suitable for children. Therefore, some discs may contain 'Parental Control' rating information that applies to the entire disc or to certain scenes on the disc.
Access control Access control Changing the PIN code Changing the country The set filter values depend on the respective country. It is therefore necessary to enter the country to which these filter values apply. 1 Switch on the TV set. If required, select the programme number for the DVD recorder. 2 Switch on the DVD recorder using [STANDBY]. Switch on the TV set. If required, select the programme number for the DVD recorder. 3 Press [SYSTEM MENU] on the remote control. The menu bar appears.
Before you call an engineer If you have any problems using this DVD recorder, the reason may be one of the following. You can also call the customer service centre in your country. Before you call an engineer ➠ There is no recording on the disc: Change disc. ➠ You inserted the wrong disc type: Your recorder can play back the following disc types: DVD Video, (Super)Video CD, DVD+R(W), Audio CD, MP3 CDs. ➠ You inserted the disc the wrong way: Insert the disc with the label facing upwards.
Before you call an engineer The wrong TV channel was decoded (entered) after you programmed a recording using ShowView System. ➠ 1Enter the ShowView programming number of the TV channel you want. 2Confirm with [OK] . 3Check the programme number/channel name in the “Prog'' input field. 4If this does not correspond to the TV channel you want, select the input field and change the programme number/channel name. 5Confirm with [OK].
Before you call an engineer Technical data DVD recorder is not responding. ➠ While a programmed recording is being made, you cannot operate your recorder manually. If you want to cancel the programmed recording, press [STANDBY]. Voltage AC 230V~ 50Hz Power consumption 22W Power consumption (standby) less than 5W (clock display off) ‘Switch off,timer recording' flashes on the TV screen. ➠ The DVD recorder was switched on several minutes before the start of a programmed recording.
