Owner`s manual

23
VCR Operation
22
Using advanced features
Play the tape automatically
■ This feature allows the VCR to automatically start playing when you insert a tape with the safety tab
removed.
Press [SETUP] button and select
“FUNCTIONS”.
Move into “FUNCTIONS” with [†] and
then, select the desired one with [ENTER]
button.
Move the cursor to “Auto Play” and
press [ENTER] to select between ON
and OFF.
- Select ON if you want a tape with its safety
tab removed to start playing automatically
when the tape is inserted.
- Select OFF if you do not want a tape with
its safety tab removed to start playing
automatically.
1
1
2
2
SETUP
CLOCK SET
TIMER RECORDINGS
CHANNEL SET
FUNCTIONS
LANGUAGE SELECT
FUNCTIONS
Auto Play: ON
Auto TV/VCR: ON
Index Search
Go-To Search
Move: Select:
End:
SETUP
ENTER
Move: Select:
End:
SETUP
ENTER
Switch the VCR to TV or VCR mode automatically
■ This feature controls whether the TV/VCR switch changes automatically to the VCR mode when the VCR is turned on.
Press [SETUP] button and select “FUNCTIONS”.
Move into “FUNCTIONS” with [†] and then, select the desired one with
[ENTER] button.
Move the cursor to “Auto TV/VCR”
and press [ENTER] to select between
ON and OFF.
- Select ON if you want the VCR to switch to
the VCR mode when the VCR is turned on
or a cassette is inserted. This only applies if
you connect the ANT.IN and RF OUT jacks
of your VCR and TV and watch your VCR on
channel 3 of your TV.
- Select OFF if you want the VCR to remain
in the TV mode. This is useful if you watch
your VCR on the TV’s video input and you
don’t want your antenna/cable signal
interrupted by the VCR.
2
2
1
1
FUNCTIONS
Auto Play: ON
Auto TV/VCR: ON
Index Search
Go-To Search
Move: Select:
End:
SETUP
ENTER
To Delete Channels Manually
■ Follow the procedures below to delete stored channels.
■ You must set the viewing mode for your VCR, choosing either CABLE (cable system connection) or ANTENNA
(antenna connection).
1
1 Press [SETUP] button and select
“CHANNEL SET”. Select “Add/Remove
Channels”.
2
2 Select the desired channel and delete it.
ADD/REMOVE CHANNELS
Channel 02
is now REMOVED.
Memorizing TV Channels
Selecting cable or antenna viewing
To set the viewing mode:
From the CHANNEL SET menu, press [†] to move the
cursor down to SIGNAL TYPE. Press [ENTER] to toggle
between CABLE and ANTENNA.
When the desired viewing mode is displayed, press
[SETUP] twice to exit.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Channel Change: CH3
To Set Output Channel
Press [SETUP] button and select “CHANNEL
SET”. Select “Channel Change”.
By pressing [ENTER] button, set the exclusive channel
for video on the desired one of CH3 or CH4.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Channel Change: CH3
Press [NUMBER] button of remote control to select the desired channel to delete.
When [√] button is pressed, “ADDED” under the channel number converts into
“REMOVED”.
3
3 To check the deleted channel, press [CH up/down] button on remote control.
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Daewoo Manuals