DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` A mac001 1200DPI 90LPI OWNER’S MANUAL ENGLISH HELP LINE Number ; 0870 100 2525 With queries, please quote the page number, reference number and model number.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` B mac001 1200DPI 90LPI SAFETY INFORMATION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: To reduce the risk of fire and electric shock, do not remove the cover (or back) of the unit. Refer servicing only to qualified service personnel.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` C mac001 1200DPI 90LPI SAFETY INFORMATION safety characteristics as the original parts. Use of replacements specified by the video product manufacturer can prevent fire, electric shock, or other hazards. 20 Safety Check - Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks recommended by the manufacturer to determine that the video product is in safe operating condition.
DSD-800M_UK_2007 2007.10.
DSD-800M_UK_2007 2007.10.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 2 mac001 1200DPI 90LPI INTRODUCTION-About the STB Using Remote control • Remove the battery compartment cover. • Load two AAA (UM-4 or R03) batteries into the battery compartment. • Make sure that the batteries have been inserted with the correct polarities matching to the symbols +, - marked in the battery compartment. Close the battery compartment cover. • When replacing batteries, replace both batteries.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 3 mac001 1200DPI 90LPI SYSTEM CONNECTION General about connections Connecting to the TV aerial There are many different types of equipments that you can connect to the STB. In this manual you will see some of the most common ways to connect your equipment. You can connect the STB to the following type of aerials: Œ Standard outdoor aerial Please note the following: • In some block of flats, the roof-mounted aerial system includes a filter and channel selector.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 4 mac001 1200DPI 90LPI SYSTEM CONNECTION Connecting to the TV with SCART Connecting a Amplifier/Receiver system • Remove the aerial lead from your TV and connect this to the TV AERIAL input socket on the STB. • Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the STB. • Switch on your TV, plug in and switch on your STB. You may need to select the AV (SCART) input on your TV to watch Digital TV.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 5 mac001 1200DPI 90LPI GETTING STARTED Easy Install Channel scan If you use the STB for the first time, the "Easy Install" menu appears. Press the "LEFT" or "RIGHT" cursor button to setup the OSD Language. Press the "OK" button to start channel search. ! Press the "MENU" button to enter main menu. @ Select "Installation", press the "OK" button Installation menu. to enter # Select "Channel Scan" and press the "OK" button enter the Channel Scan menu.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 6 mac001 1200DPI 90LPI OPERATION Changing Channels There are four ways of channel selection - stepping through the channel list, selection by number, from the on-screen channel list, and using the electronic programme guide (EPG). Accessing the Electronic Program Guide (EPG) ! Press the "EPG" button to enter EPG menu . ! Stepping through the channel list: @ Press numeric button "2" schedule window.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 7 mac001 1200DPI 90LPI CHANNEL Channel list menu ! Press the "MENU" button to enter the main menu, select "Channel" and press the "OK" button to enter Channel menu. @ Press the "UP" or "DOWN" cursor button to highlight the desired item and press the "OK" button to enter the setting menu. # Press the "EXIT" button to exit.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 8 mac001 1200DPI 90LPI CHANNEL Move • Press the "EXIT" button or Highlight "ESC" and press the "OK" button to close the mock keypad, and save any modification. ! In channel list menu, press numeric button "4" selected channel will be marked by a symbol " , the ". Then press the "UP" or "DOWN" cursor button to move the selected channel to the position that you want to place. @ Press the "OK" button appears.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 9 mac001 1200DPI 90LPI CHANNEL Delete All Favourites Group Rename Use this menu to delete all favourite channels. Use this menu to change the group name. ! In the Channel menu, select "Delete All Favourites", press the "OK" button , a warning window appears. ! In Channel menu, select "Group Rename", press the "OK" button to enter the group rename menu. @ Select "Yes" and press the "OK" button favourite channels.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 10 mac001 1200DPI 90LPI SYSTEM SET-UP System setup menu TV System System setup menu allows us to set OSD Language, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. This menu allows us to set the Aspect Ratio, Video Output and LCN Mode. ! Press the "MENU" button to enter the main menu, select "Setup" and press the "OK" button to enter system setup menu.
DSD-800M_UK_2007 2007.10.2 5:58 PM ˘ ` 11 mac001 1200DPI 90LPI SYSTEM SET-UP Region and Time Timer Setting This menu allows you to set the region and time. Region : This menu is used for changing the region setting. GMT Usage : This menu is used for open the usage of GMT. The options are : Off / User Define / By Region GMT Offset : This menu is valid only when "User Define" has been selected in the GMT Usage menu. The GMT offset range is "-11:30 ~ +12:00", increasing half hour progressively.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 12 mac001 1200DPI 90LPI SYSTEM SET-UP OSD Setting Parental Lock This menu allows you to set Subtitle Display, OSD Transparency, OSD Style and load default OSD setting. This menu allows you to password protect the installation menu and channel, and change the password. Subtitle Display : To set the subtitle to Standard or Off. OSD Transparency : To set the OSD transparency to Off/10%/20%/30%/40%/50%.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 13 mac001 1200DPI 90LPI Tools Tools main menu Game ! Press the "MENU" button to enter main menu. Select "Tools", press the "OK" button to enter tools menu. This menu allows you to play games on this STB. @ Press the "UP" or "DOWN" cursor button desired menu and press the "OK" button # Press "EXIT" button to highlight to enter. to exit. ! In "Tools" menu, select "Game", press the "OK" button to enter the game menu.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 14 mac001 1200DPI 90LPI Tools Software Upgrade We offer the functions for user to upgrade software version by RS-232 Interface via Scart jack or by air. ! Enter "Tools" menu, select "Software Upgrade", press the "OK" button , Software Upgrade menu is shown. @ Press "Up" or "Down" button to select the desired item and press the "OK" button , you are asked to input password. # Input the correct password (the default password is 0000.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 15 mac001 1200DPI 90LPI TROUBLESHOOTING In some region, the digital terrestrial signal may be weak. So it is advisable to use an antenna with a signal booster for watching weak signal channels. Problem Possible cause What to do Standby light not lit. Mains lead unplugged. Check mains lead. Mains fuse blown. Check fuse. Aerial is disconnected. Check aerial lead. Aerial is damaged/ misaligned. Check aerial. Out of digital signal area.
DSD-800M_UK_2007 2007.10.
SURNAME The information provided will be held on computer by the DAEWOO Registration Department of Domestic & General Insurance Co. Limited for the provision of warranty insurance or product related purposes. The information will not be disclosed to third parties, should you prefer not to receive product related details writes to Domestic & General Insurance Co. DAE REG / 295 Limited, on the address overleaf. TODAY DATE OF PURCHASE TEAR OFF HERE AND RETURN MODEL No.
1200DPI 90LPI mac001 ` 18 ˘ 2007.10.2 5:54 PM DSD-800M_UK_2007 DAEWOO GUARANTEE CONDITIONS This product is guaranteed for 12 months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge during this period by the dealer from whom you purchased the unit. The guarantee is subject to the following provisions.
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 19 mac001 1200DPI 90LPI Connection Quick Guide DSD-800M 1 To connect your STB to your TV Use a scart cable to connect the set top box to your TV. 2 If you want to record digital channels on your VCR/DVR Connect your aerial cable to the set top box "RF IN". And connect a RF cable from RF output on the STB to RF input on VCR/DVR.
