Table Of Contents Important Safety Instructions ............................................................................. 1 Disc Information................................................................................................... 3 Front Panel ........................................................................................................... 4 Rear Panel ............................................................................................................ 5 Remote Control .......
Important Safety Instructions This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit. This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance. Caution: Laser radiation when open. Do not stare into beam. Caution: use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure. Caution 1.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with dry cloth. 7. Do not block any ventilation IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the back cover. There are no user serviceable parts inside the unit.
Disc Information Discs Supported DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) DVD Audio+Video (active picture) 12cm 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) CD JPEG z Audio Still high resolution 12cm 74min 12cm The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc.
Front Panel Front View 9. PLAY button Press to play the disc in DVD mode. 10. ■ STOP button Press to stop disc playback. 11. Eject button Press to eject the disc out. 12. Power button Press to enter or exit the standby mode. 13. SD/MS/MMC Card Port Insert the SD/MS/MMC card into the port. 14. Disc Tray Slot Used to load disc. 15. Earphone Jack When connected to earphone, the internal speakers will automatically turn off. 16. USB Connecting Port Connect the USB memory. 1. Colour TFT screen 2. Speakers 3.
Rear Panel Open the back cover on the right side of the unit’s rear panel and you will see all jacks, as shown below: 6. SCART Input Jack Connect the SCART input source in SCART mode. 7. TV antenna Input Jack Connect the external TV antenna input source. 8. DC 12V Input Jack Connect the car power adapter. 9. VGA Input Jack Connect the VGA input source in VGA mode. 10. PC AUDIO Input Jack Connect the PC audio input source. 11. Power Supply Cord 1.
Remote Control Remote Control Drawing 5. S.M button Press to select the sound mode: Choose from User, Standard, Music, Movie or Speech. 6. 0~9 Number buttons Press to select numbers such as TV channel. 7. FAV button Press to access your favourite channel. 8. STEREO/AUDIO button Press to change sound parameters when receiving Nicam or Dual Audio Language broadcasts in TV mode. Press to select audio language or audio track in DVD mode. 9. VOL+/- button Press to increase or decrease the volume. 10.
Remote Control 31. SLEEP button This feature allows you to set up sleep time in TV mode. Press the button and then press the ENTER button to activate this function. Then press the ▲▼ direction buttons to select the desired time to sleep. 32. Eject button Press to eject the disc from the unit. 33. ■ STOP button Press to stop disc playback in DVD mode. 34. / Next Skip button Press to skip to the previous or next chapter/track in DVD mode. In teletext mode, they are the teletext colour buttons. 35.
Remote Control Preparation of Remote Control Using of Remote control Softly push the back cover to open the battery compartment. Point the remote control unit from no more than about 7 metres from the remote control sensor and within about 60 degrees of the front of the unit. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it.
System Connections • • • Open the back cover on the right side of the unit’s rear panel. Do not connect the power cord until all other connections have been made. Ensure that you observe the colour code when connecting audio and video cables. Connecting to Power Supply Plug the power supply cord to the wall AC outlet. Connecting to External AV Signal Source Use the AV cables to connect the external AV signal source to the AV input jacks on the rear panel of the unit.
System Connections Connecting to External AV Signal Source（YPbPr） Use red, green and blue component video cables and red and white audio cables. AV cables to connect the external AV signal source to the Y/Pb/Pr input Jacks on the rear panel of the unit. And the other end of the cables into the corresponding sockets on the TV (see below) After connection, turn on the power of the unit and external AV signal source and then press the SOURCE button to select COMPONENT mode. N.B.
System Connections Connecting to Earphones Connect earphones (headphones) to the earphone jack on the rear panel of the unit for listening to the audio output in seclusion. ◆ The internal speakers output will turn off automatically after the earphones have been connected. Note: Excessively loud volume could damage your hearing. Turn down the volume before you connect the headphones and then raise the volume to a comfortable level.
System Connections Connecting to a PC Follow the steps and the figure below to connect a PC to the unit: 1. Connect one end of the VGA cable to the VGA input jack on the right side of the unit’s rear panel and the other to the PC. 2. Connect one end of the audio cables to the PC audio input jack on the right side of the unit’s rear panel and the other to the PC audio output jack. 3. Set the PC’s resolution to 1024×768@60Hz.
System Connections Connecting to a TV Antenna Connect TV signal input source from the aerial to the TV jack on the rear panel of the unit. After connection, turn on the power of the unit. Then press the SOURCE button to select TV mode and conduct program selection. You can follow the steps below to select channels: However, if this is the first time the TV has been used, you must first search and store the channels by following the steps on pages 19, 20, 21 and 22. 1.
TV Function Preparations 1. After connection, press the POWER button to turn on the unit. 2. Press the SOURCE button to select TV mode and you can then conduct the following operations: Image Setting Note: This item is only available when there is signal input. Press the MENU button once to enter the setup menu. Press the ▲▼ button to select Image and press the ENTER button to enter the menu shown on the right. In the Image setup menu, press the ▲▼ button to select the desired item.
TV Function Brightness Setup Press the ▲▼ button to select Brightness and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Contrast Setup Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Hue Setup Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu.
TV Function When the VGA signal is connected to the unit, the Advanced setup menu is as shown below: Press the “▲▼” button to select the desired item and press the “ENTER” button to enter it’s setup menu. Press the “MENU” button to return to the previous menu. Auto Adjust: If the monitor is not clear, you should carry out “Auto Adjust”. Press the “▲▼” button to select “Auto Adjust” and press the “ENTER” button to enter it’s menu.
TV Function Audio Setting Press the MENU button once to enter the setup menu. Press the ▲▼ button to select Audio and press the ENTER button to enter the menu shown on the right. In the Audio setup menu, press the ▲▼ button to select the desired item. Press the MENU button to return to the previous menu. Volume Setup Press the ▲▼ button to select Volume and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu.
TV Function Sound Mode Setup Press the ▲▼ button to select Sound Mode and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu. Timer Setting Press the MENU button once to enter the setup menu. Press the ▲▼ button to select Timer and press the ENTER button to enter the menu shown on the right.
TV Function Tuner/Prog. Press the ▲▼ button to select the Tuner/Prog. and press the ENTER button to enter the menu shown on the right. Press the ▲▼ button to select the desired item. Press the MENU button to return to the previous menu. Country Press the ▲▼ button to select the Country and press the ENTER button to enter the menu shown on the right. Press the ▲▼ button to select the desired item. Press the MENU button to return to the previous menu.
TV Function Prg Organizer Press the ▲▼ button to select the Prg Organizer and press the ENTER button to enter the menu shown on the right. In the Prg Organizer setup menu, press the ▲▼ button to select the desired item. Press the MENU button to return to the previous menu. Pr. Name Press the ▲▼ button to select the Pr. Name and press the ENTER button to enter. Then press the ▲▼ button to select letters or press the number button to input numbers. Press the MENU button to return to the previous menu.
TV Function Search Press the ▲▼ button to select Search and press the ► or ◄ button to start searching forward or backward. Press the MENU button to return to the previous menu. Colour System Press the ▲▼ button to select Colour System and press the ENTER button to enter the setup, press the ▲▼ button to select item. Press the MENU button to return to the previous menu. N.B. “PAL” is used in most of Europe and the UK except France which uses “SECAM”.
TV Function Store Press the ▲▼ button to select Store and press the ENTER button to store the above operations. Note: The “Pr NO” and “Store” items only function when the program is searched out. Language Press the ▲▼ button to select the Language on screen display, press the ENTER button to enter the setup, press the ▲▼ button to select item. Press the MENU button to return to the previous menu. Factory Reset Press the ▲▼ button to select the Factory Reset and press the ENTER button to enter.
Teletext Function Teletext is an optional function, therefore only the sets with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which provides up-to-the-minute information on news, weather, television programs, stock prices and many other topics. The teletext decoder of this TV can support the SIMPLE and FASTEXT systems.
NICAM Function The unit supports NICAM function when in TV mode. Under NICAM TV broadcast: 1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control repeatedly to shift the sound tracks between Nicam Stereo and Mono and the screen will show the corresponding display as shown below: 2.
DVD Playback Operation Preparation 1. 2. 3. 4. Press the POWER button to turn on the unit. Press the SOURCE button and select DVD mode. Holding the disc with its printed side outward vertically to the disc tray. Slightly put the disc into the disc tray. It will be drawn into the unit and load automatically. Warning: Do not play poor quality discs that may damage the player’s lens. DVD Playback Region Code DVD players and discs are coded by region. These regional codes must match the played discs.
DVD Playback Operation Fast Playback During playback, press the or button to activate fast backward or forward playback. During fast playback, press the PLAY button to resume normal playback. SLOW During playback, press the SLOW button to activate slow playback. During slow playback, press the PLAY to resume normal playback. Repeat Use the REPEAT button repeatedly to repeat a chapter, title or all. ◆ Some discs do not support the repeat function. Menu Normally there is a selecting menu for DVD discs.
DVD Playback Operation CD Playback The player will play all tracks on a CD disc by default. You can use the and (PREV/NEXT skip) buttons, or number buttons to select a track. Stop Press the ■ STOP button once to stop playback and press the PLAY button to resume normal playback. Press the STOP button twice repeatedly to stop playback completely and the unit will return to the previous system mode.
DVD Playback Operation JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a ”PICTURE CD” when they develop your film. Normal Playback Load a JPEG disc, there will be a root menu displayed on the screen.
USB and SD/MS/MMC Card Function Preparation: 1. 2. 3. 4. Connect the unit to the power supply. Press the POWER to turn on the unit. Press the SOURCE button to select DVD mode. Insert the USB memory into the unit’s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit. Please see the figure below: ¾ Make sure that files are stored in the USB memory and SD/MS/MMC card before connection. 5.
DVD System Setup Preparations 1. Connect to the power supply and turn on the unit. 2. Press the SOURCE button to select DVD mode. 3. Press the SETUP button on the remote control to display the settings menu. The menu includes General setup, Audio setup, Video setup, Preference and Password setup. 4. Press the button on the remote control to select a category. All the items in the category will appear on the screen. 5. Press the SETUP button again to exit the setup.
DVD System Setup OSD Lang 1. 2. 3. 4. Press the button to select OSD Lang. Press the ENTER button to enter. Use the button to select items. Press the ENTER button again to confirm selection and return to the previous menu. 1. 2. 3. 4. Press the button to select Captions. Press the ENTER button to enter. Use the button to select items. Press the ENTER button again to confirm selection and return to the previous menu. 1. 2. 3. 4. Press the button to select Screen Saver.
DVD System Setup Media Center 1. Press the button to select Media Centre. 2. Press the ENTER button to enter. 3. Use the button to select DVD, USB, SD/MMC or MS. 4. Press the ENTER button again to confirm selection and return to the previous menu. Audio Setup Page Press the SETUP button to enter the General setup menu and then use the button to select Audio Setup Page, the screen will display as the below: 1. 2. 3. In the menu, use the button to select the desired item.
DVD System Setup Dynamic 1. Press the button to select Dynamic. 2. Press the ENTER button to enter the setup, the screen will display as left: 3. Press the ENTER button to enter. 4. Use the button to adjust. 5. Press the ENTER button again to confirm setting and return. 6. Press the button to return. HDCD Setup On the Audio Setup Page, use the button to select HDCD Setup. Press the ENTER button to enter the setup and the screen will display as below: 1.
DVD System Setup Video Quality Setup Select Quality, press the ENTER button to enter the menu as below: 1. In the menu, use the button to select the desired item. 2. Press the ENTER button to enter the item. 3. Press the button to return. Sharpness 1. Press the button to select Sharpness. 2. Press the ENTER button to enter. 3. Use the button to select High, Medium or Low. 4. Press the ENTER button again to confirm selection and return to the previous menu. Brightness 1.
DVD System Setup Preference Setup Press the SETUP button to enter the General Setup Page and then use the button to select Preference Page, the screen will display as the below: 1. 2. 3. In the menu, use the button to select the desired item. Press the ENTER button to enter the item. Press the button to return. Audio 1. 2. 3. 4. Press the button to select Audio. Press the ENTER button to enter. Press the button to select audio language.
DVD System Setup Parental DVD discs equipped with the child lock function are rated according to their contents and settings vary from disc to disc. Depending on the disc, you can lock out playback of the disc altogether. 1. Press the button to select Parental. 2. Press the ENTER button to enter. 3. Press the button to select item. 4. Press the ENTER button again to confirm setting, and you should enter the password. The Default Password is 3308. 5.
DVD System Setup Password Mode 1. Press the button to select Password Mode. 2. Press the ENTER button to enter. 3. Press the button to select On or Off. 4. Press the ENTER button again to confirm setting and return to the previous menu. Password Change You can change the password by yourself. 1. Press the button to select Password. 2. Press the ENTER button to enter. 3. Press the ENTER button again to change the password. 4.
Other Functions External AV Input Function The unit has an external AV input function. It supports SCART, COMPOSITE, S-VIDEO and Component modes. Use the AV cables, SCART cable and S-Video cable to connect the unit to the external AV signal source such as a DVD or VCR recorder, camcorder, satellite receiver or game player etc. Then turn on the unit and the external AV signal source. Press the SOURCE button to select the corresponding mode. Then you can go on to the set up the menu in a certain mode.
Troubleshooting SYMPTOM CHECK ITEM The player cannot play. Make sure disc is loaded in. Make sure disc is not loaded the wrong way round. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. If it occurs, take out disc and leave the player on for at least one hour. There is no sound. Make sure system connection is correct. Make sure the sound setup of DVD disc is correct.
Specifications TFT-LCD Screen Size 15 inches DVD Player DVD+/-RW, DVD+/-R, CD, CD-R, CD-RW, JPEG Multi Media USB Memory Reader MS, SD, MMC 3 in 1 Card reader and USB 1.0/2.0 compatible Max Volume up to 2GB VGA 15 Pin, Analog RGB signal, 0.
