Table Of Contents Important Safety Instructions ...............................................................................1 Disc Information.....................................................................................................3 Front Panel..............................................................................................................4 Rear Panel...............................................................................................................5 Remote Control ...
Important Safety Instructions This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit. This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance. Caution: Laser radiation when open. Do not stare into beam. Caution: use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure. Caution 1.
Important Safety Instructions 1. Read these instructions 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the back cover. There are no user serviceable parts inside the unit.
Disc Information Discs Supported DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) DVD Audio+Video (active picture) 12cm 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) CD JPEG z Audio Still high resolution 12cm 74min 12cm The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc.
Front Panel 1. Colour TFT screen 2. SOURCE button Press repeatedly to select inputs: choose from TV, SCART, COMPOSITE, S-VIDEO, COMPONENT, VGA and DVD mode. In setup menu, use the ENTER button for the same function. 3. MENU button Press to enter or exit the setup menu. 4. Pr ▲/▼ button In TV mode, press to select channels. In setup menu, use the ▲/▼ direction buttons for the same function. 5. VOL ▲/▼ button In TV mode, press to increase or decrease the volume.
Rear Panel Open the back cover on the right side of the unit’s rear panel and you will see all jacks, as shown below: 1. Y/Pb/Pr Input Jacks Connect the Y/Pb/Pr input in Component mode. 2. Y/Pb/Pr L/R Audio Input Jacks Connect the L/R audio input in Component mode. 3. Composite A/V Output Jacks Connect to output the Audio/Video signals in Composite mode. 4. S-VIDEO and Composite A/V Input Jacks Connect to the S-VIDEO input in S-VIDEO mode or composite input in Composite mode.
Remote Control Preparation of Remote Control Using of Remote control Softly push the back cover to open the battery compartment. Point the remote control unit from no more than about 7 metres from the remote control sensor and within about 60 degrees of the front of the unit. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it.
Remote Control Remote Control Drawing 1. POWER button Press to enter or exit the standby mode. 2. TV button Press to select TV mode. 3. DVD button Press to select DVD mode. 4. P.M. button Press repeatedly to select the screen picture modes, choose from User, Standard, Soft, Bright or Shine. 5. S.M. button Press repeatedly to select the sound mode: choose from: User, Standard, Music, Movie or Speech. 6. 0~9 Number buttons Press to select numbers such as TV channel. 7.
Remote Control 19. MENU button (under DVD mode) Press to enter disc menu in DVD mode. In teletext mode, press to disable teletext display for page updates and press again to resume. 20. SETUP button Press to enter DVD setup menu in DVD mode. In teletext mode, press to display index page (always page 100). 21. SLOW button Press to activate slow playback function in DVD mode.
System Connections • Open the back cover on the right side of the unit’s rear panel. • Do not connect the power cord until all other connections have been made. • Ensure that you observe the colour code when connecting audio and video cables. Connecting to Power Supply Connect one end of the provided power adapter to the DC 12V IN jack on the side panel of the unit and the other end to the AC wall outlet.
System Connections Connecting to External AV Signal Source (YPbPr) Use red, green and blue component video cables and red and white audio cables to connect the external AV signal source to the Y/Pb/Pr input Jacks on the rear panel of the unit. And the other end of the cables into the corresponding sockets on the TV (see below). After connection, turn on the power of the unit and external AV signal source and then press the SOURCE button to select COMPONENT mode.
System Connections Connecting to External AV Input Device (AV Output) Use the AV cables to connect the external AV input device to the AV output jacks on the side panel of the unit. Note: The unit can output TV, COMPOSITE, S-VIDEO and SCART-COMPOSITE signals. After connection, turn on the power of the unit and external AV input device and then press the SOURCE button to select the corresponding mode.
System Connections Connecting to a PC Follow the steps and figure below to connect a PC to the unit. 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and the other end to the PC. 2. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit and the other end to the PC audio output jack. 3. Set the PC’s resolution to 1440 x 900 or 1024 x 768; and the fresh frequency to 60Hz.
System Connections Connecting to a TV Antenna Connect TV signal source from the aerial to the TV jack on the rear panel of the unit. After connection, turn on the power of the unit. Then press the SOURCE button to select TV mode and conduct program selection. You can follow the steps below to select channels: However, if this is the first time the TV has been used, you must first search and store the channels by following the steps on pages 18, 19, 20 and 21. 1.
TV Function NOTE: In other mode, you can refer to the following instructions in TV mode to go on with some settings. Only when there are signals, the menus can appear and be set. Preparation 1. After connection, press the POWER button to turn on the unit. 2. Press the SOURCE button to select TV mode and you can conduct the following operation: Image Setting Press the MENU button once to enter the setup menu. Press the ▲▼ button to select Image and press the ENTER button to enter the menu shown right.
TV Function Brightness Setup Press the ▲▼ button to select Brightness and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Contrast Setup Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Hue Setup Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu.
TV Function Audio Setting Press the MENU button once to enter the setup menu. Press the ▲▼ button to select Audio and press the ENTER button to enter the menu shown right. In this setup menu, press the ▲▼ button to select the desired item. Press the EXIT button to exit from the menu. Volume Setup Press the ▲▼ button to select Volume and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu.
TV Function Sound Mode Setup Press the ▲▼ button to select Sound Mode and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the EXIT button to exit from the menu. Timer Setting Press the MENU button once to enter the setup menu. Press the ▲▼ button to select Timer and press the ENTER button to enter the menu shown right.
TV Function Tuner/Channel Press the ▲▼ button to select the Tuner/Channel and press the ENTER button to enter the menu shown right. Press the ▲▼ button to select the desired item. Press the EXIT button to exit from the menu. Country Press the ▲▼ button to select the Country and press the ENTER button to enter the menu shown right. Press the ▲▼ button to select the desired item. Press the MENU button to return to the previous menu.
TV Function Prog Organizer Press the ▲▼ button to select the Prog Organizer and press the ENTER button to enter the menu shown right. In the Prog Organizer setup menu, press the ▲▼ button to select the desired item. Press the EXIT button to exit from the menu. Pr. Name Press the ▲▼ button to select the Pr. Name and press the ENTER button to enter. Then press the ▲▼ button to select letters or press the number button to input numbers. Press the MENU button to return to the previous menu.
TV Function Search Press the ▲▼ button to select Search and press the ► or ◄ to start searching forward or backward. Press the MENU button to return to the previous menu. Colour System Press the ▲▼ button to select Colour System and press the ENTER button to enter the setup, press the ▲▼ button to select item. Press the MENU button to return to the previous menu. Note: “PAL” is used in most of Europe and the UK except France which uses “SECAM”.
TV Function Pr NO Press the ▲▼ button to select Pr NO and press the ENTER button to enter. Press the number buttons to enter the channel number. Press the MENU button to return to the previous menu. Store Press the ▲▼ button to select Store and press the ENTER button to store the above operations. Note: The “Pr NO” and “Store” items only function when the program is searched out.
TELETEXT Function Teletext is an optional function, therefore only the sets with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which provides up-to-the-minute information on news, weather, television programs, stock prices and many other topics. The teletext decoder of this TV can support the SIMPLE and FASTEXT systems.
NICAM Function The unit supports NICAM function when in TV mode. Under NICAM TV broadcast: 1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control repeatedly to select the sound tracks between Nicam Stereo and Mono and the screen will show the corresponding display as shown below: 2.
DVD Playback Operation Preparation 1. 2. 3. Connect the unit to the power supply and press the POWER button to turn on the unit. Press the SOURCE button and select DVD mode. Holding the disc with its printed side outward vertically to the disc tray and gently insert the 4. disc into the disc tray slot. It will automatically be taken fully into the disc tray and the player will search the disc and play it automatically in DVD mode. Warning: Do not play poor quality discs that may damage the unit.
DVD Playback Operation Fast Playback Press the button on the remote control to activate fast backward or forward playback. SLOW During DVD disc playback, press the SLOW button on the remote control to start slow playback. During slow playback, press the PLAY button to resume normal playback. Repeat Use the REPEAT button repeatedly to repeat a chapter, title or all. Some discs do not support the repeat function.
DVD Playback Operation Various Camera Angles The movies on some discs have been recorded from various camera positions, which can make you enjoy the same scene from different perspectives. When playing a disc containing various camera angles, the camera symbol appears on the screen. Press the ANGLE button repeatedly until the desired perspective is shown. The picture will be adjusted in 1～2 seconds. CD Playback The player will play all tracks on a CD disc by default.
DVD Playback Operation JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a ”PICTURE CD” when they develop your film. Normal Playback Load a JPEG disc there will be a root menu displayed on the screen.
USB and SD/MS/MMC Card Function Preparation In DVD mode, connect USB memory to the USB port or insert SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit. ¾ Make sure that files are stored on USB memory or the SD/MS/MMC card before connection. File Playback 1. Press the CARD button to select disc playback, USB playback or SD/MS/MMC playback. The default state is disc playback. Please see the figure below: 00:00 00:00 001/002 BAK JPEG 2.
DVD System Setup Preparation 1. In DVD mode, press the SETUP button to open DVD setup menu. 2. 3. Press the button to select setup menu Press the SETUP button again to exit from DVD setup menu. General Setup Page Press the SETUP button to enter General Setup Page and the screen will display as below: 1. In the menu, use the button to select the desired item. 2. Press the ENTER button to enter the item. 3. Press the button to return. TV Display 1. Press the button to select TV Display. 2.
DVD System Setup OSD Lang 1. Press the button to select OSD Lang. 2. Press the ENTER button to enter. 3. Use the button to select items. 4. Press the ENTER button again to confirm selection and return to the previous menu. Captions 1. Press the button to select Captions. 2. Press the ENTER button to enter. 3. Use the button to select On or Off. 4. Press the ENTER button again to confirm selection and return to the previous menu. Screen Saver 1. Press the button to select Screen Saver. 2.
DVD System Setup Media Center 1. Press the button to select Media Center. 2. Press the ENTER button to enter. 3. Use the button to select DVD, USB, SD/MMC or MS. 4. Press the ENTER button again to confirm selection and return to the previous menu. Audio Setup Page Press the SETUP button to enter General Setup Page and then use the buttons to select Audio Setup Page, the screen will display as below: 1. In the menu, use the button to select the desired item. 2.
DVD System Setup Dynamic 1. Press the button to select Dynamic. 2. Press the ENTER button to enter. 3. Use the button to adjust. 4. Press the ENTER button again to confirm setting and return. 5. Press the button to return. HDCD Setup On the Audio Setup Page, use the direction buttons to select HDCD Setup. Press the ENTER button to enter the setup and the screen will display as below: 1. In the menu, press the ENTER button to enter the setup. 2. Use the button to select items. 3.
DVD System Setup Video Quality Setup Select Quality in the Video Setup Page and press the ENTER button to enter the menu as below: 1. In the menu, use the button to select the desired item. 2. Press the ENTER button to enter the item. 3. Press the button to return. Sharpness 1. Press the button to select Sharpness. 2. Press the ENTER button to enter. 3. Use the button to select High, Medium or Low. 4. Press the ENTER button again to confirm selection and return to the previous menu.
DVD System Setup Preference Page Press the SETUP button to enter the General Setup Page and then use the button to select Preference Page, the screen will display as the below: 1. In the menu, use the button to select the desired item. 2. Press the ENTER button to enter the item. 3. Press the button to return. Audio 1. Press the button to select Audio. 2. Press the ENTER button to enter. 3. Press the button to select audio language. 4.
DVD System Setup Parental DVD discs equipped with the child lock function are rated according to their contents and settings vary from disc to disc. Depending on the disc, you can lock out playback of the disc altogether. 1. Press the button to select Parental. 2. Press the ENTER button to enter. 3. Press the button to select item. 4. Press the ENTER button again to confirm setting and you should enter the password. The Default Password is 3308. 5.
DVD System Setup Password Mode 1. Press the button to select Password Mode. 2. Press the ENTER button to enter. 3. Press the button to select On or Off. 4. Press the ENTER button again to confirm setting and return. Password Change You can change the password by yourself. 1. Press the button to select Password. 2. Press the ENTER button to enter the setup, see the picture on the left. 3. Press the ENTER button again to change the password. 4.
Other Function External AV Input Function The unit has an external AV input function. It supports Composite, S-VIDEO and Component modes. Use the audio, video and S-Video cable to connect the unit to the external AV signal source such as a DVD or VCR recorder, camcorder, satellite receiver or game player etc. Then turn on the unit and the external AV signal source. Press the SOURCE button to select the corresponding mode. Then you can go on to the set up the menu in a certain mode.
Troubleshooting SYMPTOM CHECK ITEM There is no display on the Make sure the unit is turned on and all connections are screen. correct. There is no sound. Make sure the unit is turned on and all connections are correct. Make sure the volume is not turned down or muted. Make sure the sound setup is correct. In DVD mode, make sure disc is not dirty or warped. There is no picture or picture jitters up and down. Make sure all connections are correct. Make sure the unit is in correct video mode.
Specifications TFT-LCD Resolution 1440 x 900 TFT-LCD Screen Size 19 inches AC100～240V，50/60Hz Power DC 12V DVD Player DVD+/-RW, DVD+/-R, CD, CD-R, CD-RW, JPEG, MS, SD, MMC 3 in 1 Card reader and USB 1.0/2.0 Multi Media USB Memory Reader compatible Max Volume up to 2 GB 15 Pin, Analog RGB signal, 0.
