LCD TELEVISION INSTRUCTION MANUAL DSL-15D3 DSL-17D3 DSL-20D3 DSL-15D4 DSL-17D4 DSL-20D4 PAL B/G, D/K, I/I, SECAM B/G, D/K, L/L’, NTSC(AV) TELETEXT SCART/VIDEO/S-VIDEO/COMPONENT/PC MULTI-LANGUAGE OSD Helpline Number: 0870 100 2525
Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock.
Safety Precautions 1. CLEANING Unplug this TV equipment from the AC power outlet before cleaning. Do not use liquid cleaner or aerosol cleaners. Use a soft and damp cloth for cleaning. 2. ATTACHMENTS Do not use attachments not recommended by the TV equipment manufacturer as they may result in the risk of fire, electric shock or other injury. 3.
Contents IMPORTANT SAFEGUARDS 5 SUPPLIED ACCESSORIES 6 FUNCTIONAL OVERVIEW Front (Control panel) Remote controller 7 7 8 PREPARATION Inserting Batteries into the Remote Control Unit Mains connection Aerial connection Connecting external equipment 9 9 9 10 12 INSTALLATION Language selection Automatic Tuning of TV Channels Programme Editing Manual Tuning 14 14 14 15 16 DAILY USE Switching On and Off Recall Programme Selection Picture Control Sound Control Special Features Time setting Wake up time s
Important Safeguards Location Heat, Moisture, Dust, Vibration Position your set so that bright light or sunlight doesn't fall directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Do not expose the set to dripping or splashing. Ventilation Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. Leave at least 10 cm around each side of the TV set.
Supplied Accessories Make sure that the following accessories are provided with the product. AC cord AC/DC adapter POWER MUTE PR VOL VOL MENU PC PR 1 2 4 5 7 8 SLEEP 3 6 9 NORMAL 0 RECALL ASPECT S.MODE X ? Remote controller Instruction manual Batteries (Option) (2x1.
Functional Overview Front (Control panel) PR Power On/Off PR Up/Down MENU Volume Up/Down AV MENU 7 Remote sensor LED indicator
Functional Overview Remote Controller [ ] : Teletext function POWER MUTE MUTE POWER PR UP (PR UP) [PAGE UP] MENU VOL VOL MENU LEFT(VOLUME DOWN) RIGHT(VOLUME UP) PC PC NUMBER[PAGE] AV DOWN(PR DOWN) [PAGE DOWN] PR 1 2 3 4 5 6 7 8 SLEEP 9 NORMAL SLEEP[SUBPAGE] 0 NORMAL RECALL ASPECT S.
Preparation Inserting Batteries into the Remote Control Unit To load the batteries, turn the remote control handset over and open the battery compartment. Insert the batteries (Two 1.5v, type R03 or AAA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment. Note: To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. Mains Connection 1.
Preparation Aerial Connection CONNECTING THE TV DIRECTLY TO AN AERIAL Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminal on the back of the TV set.
Preparation AERIAL CONNECTION WITH VCR Connect your aerial cable to the RF(aerial) IN terminal on the VCR. Connect the RF OUT terminal of the VCR to the Aerial terminal on the TV set with RF cable. NOTE: If you wish to use only the Aerial (RF) connection, then you should store the VCR channel on programme number “ZERO”using the “Manual tuning”function (See page 16). Now you can watch the VCR in TV mode by selecting the programme number “PR00”.
Preparation Connecting external equipment PC PC Audio cable PC D-sub cable COMPONENT AV 1 Pr Pb Y Y R S-VIDEO L L Pb R R Pr AUDIO PC INPUT VIDEO2 PC AUDIO L SCART cable Headphone RCA cable S-video cable Set Top Box VCR/DVD DVD 12 Set Top Box VCR/DVD/Camcorder/ Video Game
Preparation TV/AV/PC MODE SELECTION Press the TV/AV( ) button on the control panel repeatedly to select the source. You can also select the source using TV/AV( ) button on the remote controller. TV AV1 AV2 S-VIDEO COMPONENT PC TV There is the direct key on the remote controller, PC, for the PC mode. In TV mode, you can change the TV programme number with the UP/DOWN button or the NUMBER button. NOTE : When the TV SET has no signal, OSD(On Screen Display) appears on the screen.
Installation Language Selection 1. When you turn on the TV set(see page18) for the first time, the Language menu appears for the on-screen display. If not, (1) Press the MENU button to call up the menu. (2) Move the selection bar to the Utilities menu with UP/DOWN button. (3) Press the RIGHT button. (4) Move the selection bar to the Language with UP/DOWN button. Picture Language English Time Sound Osd Translucent Opaque Colour temp Utilities Normal Child lock Off Setup Move Adjust MENU Prev.
Installation 6. Press the LEFT/RIGHT button. All available TV channels(CH) are searched for and stored from programme number (PR) 1 onwards automatically. The names of the TV channels are stored as well if the TV channels broadcast VPS, PDC or Teletext. 10 % ATS MENU Exit 7. Please wait until the tuning screen disappears. Programme Editing Select the Edit menu from the Setup menu. DELETING THE PROGRAMME 1. Position the selection bar to the programme to delete with the UP/DOWN buttons. 2.
Installation Manual tuning Select the Manual tuning from the Setup menu. PROGRAMME NUMBER SELECTION 1. Position a selection bar to Program. 2. Press the LEFT/RIGHT buttons to select a programme number you want. TV SYSTEM SELECTION If necessary, you can change the TV System. 1. Position a selection bar to System. 2. Select the TV system with LEFT/RIGHT button. CHANNEL SEARCH Up/Down Search 1. Position the selection bar to Search. 2. Press the RIGHT or LEFT button to search up or down. 3.
Installation Direct Search You can find the desired channel directly without Search function by inputting the channel number. 1. Place the selection bar to ‘Ch’. 2. Press the RIGHT button of the remote control to start. 3. Using RIGHT/LEFT button of the remote control to select the digit, which you desire to change. 4. By pressing the UP/DOWN button, you can find the desired number or character. 5. For saving the channel you select, please memorize it.
Daily Use Switching On and Off SWITCHING ON 1. If the Indicator is not lit, then the TV set is powered off. You must press the button on the TV set. The set will switch to stand-by mode and then the Indicator will illuminate in Red. 2. Press the POWER button, UP/DOWN button or NUMBER button on the remote controller or UP/DOWN button on the TV set. The TV set will be switched on and then the Indicator will change to Green. SWITCHING OFF 1.
Daily Use Programme Selection The set has 100 programme numbers, PR00..PR99. DIRECT SELECTION The NUMBER buttons are used for direct programme selection. To select a two-digit programme, press the second numbered button within 2 seconds. UP/DOWN SELECTION You can also select a programme by pressing step by step the UP/DOWN buttons. Picture Control 1. Select the Picture menu. 2. Select and adjust the level of each function: “Brightness”, “Contrast”, “Colour”, “Sharpness”.
Daily Use Sound Control VOLUME CONTROL Adjust the volume with the LEFT/RIGHT buttons. Volume 20 MUTE Pressing the MUTE button ( ) turns the sound off. The MUTE symbol will be displayed. The sound returns if the button is pressed once more. SOUND MODE Stereo/Mono sound selection When receiving a Stereo programme, Stereo mode is automatically selected.
Daily Use Special Features Select the Utilities menu. CHILD LOCK The set is child-locked by selecting “On”. This prevents the use of the TV set without the remote control. Picture Language English Time Sound Osd Translucent Opaque Colour temp Utilities Normal Child lock Off Setup OSD BACKGROUND If you select Translucent, the OSD (On-Screen Display) back-ground appears translucent. If you select Opaque, the OSD back-ground appears opaque. Move Adjust MENU Prev.
Daily Use Wake up time Setting Picture Time Wake up Wake up 1. Select the Wake up. 2. Press the RIGHT button while the selection bar is on Wake up. 3. Select wake up On or Off with the LEFT/RIGHT buttons. 4. Press the MENU button for exit. On time 1. Select the On time. 2. Press the RIGHT button while the selection bar is on On time. 3. Using UP/DOWN and LEFT/RIGHT buttons, input the desired time. 4. Press the MENU button for exit.
Daily Use Teletext (Option) SWITCHING TELETEXT ON/OFF Press the TELETEXT button ( ). The index page or the page viewed last will appear. Press the TELETEXT button again to return to the TV mode. NOTE: Teletext works only in TV/AV mode. COLOUR BUTTONS IN TOP/FLOF TELETEXT A red, green, yellow and blue field is shown at the bottom of the screen.
Daily Use CALLING UP SUBPAGE DIRECTLY Pressing the SUBPAGE button ( ) , “ - - - - ” appears. Enter the subpage number that you want to call up with the NUMBER button, for example, the 2nd page, sequence 0002. The desired subpage will eventually be displayed on the screen and holds it there.
Daily Use PC setup PC Mode input format. If the signal from the PC system equals one of the standard signal modes, the screen will automatically adjust and display image. If the signal from the PC system doesn’t equal any of the modes, adjust the Video card setting on the computer. For the display modes listed below, the screen image has been optimized during manufacture.
Daily Use Select the Screen menu in the PC mode. H-POSITION AND V-POSITION Use this to adjust the horizontal and vertical position of the displayed image. Picture V position Sound PHASE This function allows you to remove any horizontal noise and clear or sharpen the image of characters. FREQUENCY This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.
Wall/Arm Mounting Attaching a Wall or Arm mounting device This TV supports the VESA mounting standard and will accommodate various VESA mounting devices. To install any VESA mounting device, please follow the manufacturer’s instructions. 1. Remove all cables connected to the TV. 2. Lay the LCD TV face-down on a flat surface with a blanket or other soft materials to protect the screen. 3. Remove the four screws attaching the stand. Remove stand from LCD TV. 4. Remove the four screws attaching the rear cover.
Troubleshooting Please check the following items before calling for the repair services. Problem TV set Control/System lock up Check item Reference page · The TV may have malfunctioned. · Switch your TV off and on again with the main 18 button on the TV set. Remote control does · Perform control/system lock up reset (as above) not work. · Replace the batteries in the remote controller. 9 · Make sure the Remote sensor window is not understrong light e.g. a fluorescent lamps. Local buttons do not work.
Product Specifications MODEL NUMBER DSL-15D3/15D4 PANEL 15” TFT LCD 17” WIDE TFT LCD 20”TFT LCD SCREEN SIZE 381mm 434.38mm 510.54mm DISPLAY COLOR 16.2M 16.2M 16.7M CONTRAST RATIO 400 450 500 PIXEL PITCH 0.297(H)x0.297(V) 0.2895(H)x0.2895(V) 0.51(H)x0.51(V) ASPECT RATIO 4:3 16:9 POWER REQUIREMENT AC 100V-240V~, 50/60Hz POWER CONSUMPTION 34W DSL-17D3/17D4 DSL-20D3/20D4 4:3 40W 50W SOUND OUTPUT 2.5W+2.5W 2.5W+2.5W 2.5W+2.
