LCD COMBO DVD / TV DSL-26T2WCD HELPLINE NUMBER 0870 100 2525
1 Caution 2 Safety Information 3 4 4 5 6-7 8 8-9 10 11 11 12 13-14 Unit and Accessories Getting Started Front View Rear View Remote Control Key Functions Menu Operation Basic TV operation PICTURE menu options SOUND menu options TIMER menu options FUNCTION menu options SETUP menu options 15 16-19 21 DVD operation Additional operation Disc care 22 23 SimpleTroubleshooting Techincal Specifications
caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety The TV set should only be connected to a mains supply which matches that stated on the label on the rear of the TV. To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Unit and Accessories Unit and Accessories SYS-MENU INPUT DVD SYS-EXIT DISPLAY ASPECT FAV FAV+ DVB DVD RETURN LANGUAGE User’s Manual Power cable 3 FAV-
Getting Started Getting Started Please insert a 12cm disc according to the instructions on the label beside the DVD slot INPUT PR+ PR- Remote control window(keep clear) Led indicator V (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED Indicator: Press POWER to turn on and off, Indicator on(Red) Standby mode Indicator on(Green) Power on mode romote control INPUT Press to display the input source menu.
Getting Started 13 Common Interface USB Power Switch SD/MMC/MS COAX 11 1. AC POWER IN : Connect to the power cable.( Warning: This appliance must be earthed). 2. Power Switch 3. COAX: Digital output to Audio amplifier. 4. HDMI 1 / 2: Connect to the HDMI sockets of DVD player or other equipment. 5. VGA: PC Display. Connect to the D-Sub 15 pin connector of PC. 6. PC AUDIO : Connect to Audio output of PC sound card. 7. S-VIDEO: Connect to S-Video socket of DVD player or similar equipment (video only).
Remote Control Key Functions 1. POWER: Turn the TV on/standby. 2. buttons for DVD operation : Load/eject DVD disc : Play/pause DVD program : Stop DVD program : DVD fast reverse : DVD fast forward : DVD previous chapter : DVD next chapter 1 2 3 SYS-MENU 5 6 INPUT 4 8 DVD 7 9 10 SYS-EXIT DISPLAY 11 12 13 ASPECT FAV FAV+ DVB DVD RETURN LANGUAGE 2.
1 10. DISPLAY: Display current mode information. 11. SYS-EXIT: Exit the OSD menu. 12. 0-9,-/-Choose channel directly. Number buttons for DVD. 2 Returns to the previous channel. 3 SYS-MENU 5 6 INPUT 4 8 DVD 7 PICTURE: Select the picture mode. SOUND: Select the sound mode. NICAM/A2 : Selects stereo( ) or Mono ( ) sound. MUTE: Mutes the Audio. SLEEP: Standby Timer ASPECT: Press to change the display mode of the screen: 4:3, 16:9.etc. 9 10 SYS-EXIT DISPLAY 11 13.
Menu Operation Basic TV operation TURN ON LCD TV 1. Connect power cable to mains supply and turn on the power by using the “ Power Switch” at the back of the TV. The standby indicator on the front of the tv will light up in Red. 2. Use the POWER button on the right hand of the TV or the “ ” button on the handset to turn on the TV , the indicator will turn Green. TURN OFF LCD TV 1.
Press the MENU button to display the main menu. button to enter the menu.
In this manual, the settings shown on the OSD (On Screen Display) may be different from those on your TV. Those printed here are only an example to help demonstrate TV operation. PICTURE menu options Press the MENU button on the right hand side of your tv or the MENU button on your remote control then use / button or the VOL buttons on the TV to select the picture menu, press or the PR buttons on the TV to enter the menu. (see picture below).
SOUND menu options Press the MENU button on the right hand side of your tv or the MENU button on your remote control then use / button or the VOL buttons on the TV to select the sound menu, press or the PR buttons on the TV to enter the menu. (see picture below). SOUND 20 Volume Music Sound Mode Bass 60 Treble 52 Balance 50 Select 1. Use / or the PR buttons on the TV to select what you want to adjust in the Sound menu. / button or the VOL buttons on the TV to Adjust. 2. Press 3.
FUNCTION menu options Press the MENU button on the right hand side of your tv or the MENU button on your remote control then use / button or the VOL buttons on the TV to select the Function menu, press or the PR buttons on the TV to enter the menu. (see picture below) . FUNCTION Language English Video Size Full Screen Blue Screen On Child Lock 1. Use / or the PR buttons on the TV to select what you want to adjust in the Function menu. / button or the VOL buttons on the TV to adjust. 2. Press 3.
SETUP menu options(used in TV/DTV source) Press the MENU button on the right hand side of your tv or the MENU button on your remote control then use / button or the VOL buttons on the TV to select the setup menu, press or the PR buttons on the TV to enter the menu. (see picture below). SETUP UK Country Auto Tuning Manual Tuning Program Edit 1. Use / or the VOL buttons on the TV button to select what you want to adjust in the setup menu. / button or the VOL buttons on the TV to adjust. 2. Press 3.
Manual Tuning in DTV mode Manual Tuning Channel 32 Start Search Begin Service Found 0 Signal Quality 0% Signal Strength 0% Frequency 474.00MHz Select Enter Channel: Select the current channel. button to begin searching, and it will display “Search”, after a few second, Start Search: press it will display “Finish”. Program Edit In DTV mode Favourite (In DTV mode): Set favourite channels.( You could use the Channel list Flags DTV 1. BBC1 X 2. BBC2 X 3. ITV1 X 4. CHANNEL 4 X to cancel.
DVD Operation DVD Operation Press the Power button on the TV or the remote control, then press the INPUT button to select DVD mode. If there is no disc in the DVD player the screen will show "NO DISC". Place a disc Insert a disc according to the instruction by the slot. Do not touch the playing surface. Hold the disc around the outside with your fingers and place the disc into the slot. The player will automatically draw the disc into the player.
Additional operation 5. According to the Direction Indicator on the menu, you can press Arrow buttons to highlight where you want to enter. 6. During Program Playback, if program button is repressed, the program order and the contents will be displayed on the screen, and the Program Playback will be stopped; also you can press Stop and Play to resume normal playback. 7. Notes: To clear the program order, use Arrow buttons to highlight the "CLEAR" item, then press Enter.
Additional operation 2. While a disc is playing, press Repeat button once and the repeat banner appears to show current repeat mode. a) In SVCD, VCD, CD, HD-CD, WMA or Digital Audio disc/JPEG sequence playback mode. Press Repeat button again to turn on repeat mode. Press the button again on the remote to turn to the next repeat mode. There are three repeat options: Off, Track Repeat and Disc Repeat. With each consecutive press of the button, the repeat mode switches.
Additional operation 3. Notes a) This feature does not work in Program Play mode. b) If PBC is on, it will turn off automatically when Search Playback starts. c) When playing WMA, MP3 / JPEG discs, Search Feature does not work. Changing the Soundtrack or Language 1. Compatible with DVD SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs. 2. Press the LANGUAGE button to display current soundtrack. a) Press the button to switch soundtracks.
DVD System Operation 3. The player will then start to play the first track, of the selected directory. 4. To change directories use the direction buttons. DVD System Operation System operation will define the setting of the set; these definitions will be stored until you change them again. General Steps of Setup Menu 1. Pause or Stop the player. Press DVD-SETUP on the remote control. The main menu will be shown as below. 2. Press the ɼ/ɽ buttons to select the Icon of the desired section, e.g.
DVD System Operation RATING The Rating feature is a rating limit feature, like movie ratings. This helps you to control what DVD the family watches. There are 8 levels of selection, from KIDS SAFE to ADULT. Adult is the "play all" selection. 2. LANGUAGE SETUP The language setup options are illustrated below: - OSD LANGUAGE: The OSD will display in the language you choose. - AUDIO LANG: If the disc you are playing has the language you choose, it will output audio in that language.
Disc Care Disc Care About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections, "title". Chapter The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching, but some discs may not have a recording chapter. Track A segment of picture or music on a CD, Each track is numbered for searching.
Simple Troubleshooting Simple Troubleshooting changes SYMPTOM REMEDY GENERAL Dead. No LED Lit Dead Led lit red Blue screen. No power to the TV. Set still in standby. No signal. Incorrect source selected. No sound Press INPUT button to select correct source. If using an indoor aerial, try moving the Noisy, snowy, ghosting picture (TV) Check all connections to the TV and power switch on the TV turned on. Press either the Power button on the TV or the Standby button on the Remote control.
Techincal Specifications Techincal Specifications TV TVSystem Screen size Resolution Aerial input Audio output power PAL (BG/DK/I) SECAM(BG/DK) 26"(diagonal) 1366x768pixels (RGB) (unbalanced) 75 2x8 W Power Consumption AC 100-240V 50/60Hz 160W Remote control Type Control distance Control angle Batteries Dimensions Weight infrared 5m 30° (horizontal) 2 x 1.
