LCD COMBO DVD / TV DSL22T2WCD HELPLINE NUMBER 0870 100 2525
1 Caution 2 Safety Information 3 4 4 5-6 7-8 9 9-10 11 12 12 13 14-15 Unit andAccessory Getting Started Front VIew Rear View Remote Control Key Functions Menu Operation Basic TV operation PICTURE menu options SOUND menu options TIMER menu options FUNCTION menu options SETUP menu options 16-17 17-20 20-21 22 DVD operation Additional operation DVD System Operation Disc care 23 24 SimpleTroubleshooting Techincal Specifications
caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety x The TV set should only be connected to a mains supply which matches that stated on the label on the mains adapter x To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Unit and Accessory User’s Manual Mains adapter Mains cable
Getting Started Getting Started PR+ PR- INPUT EJECT: Load/eject DVD disc. PREV: DVD previous chapter. NEXT: DVD next chapter. STOP: Stop DVD program. PAUSE: pause DVD program. PLAY: Play pause DVD program. Please insert a 12cm disc according to the instructions next to the slot. LED Indicator (IR) Infrared Receiver: Receives IR signals from the remote control.
Getting Started DVD Common Interface COAX out Y Pb Pr USB CARD Output to digital DVDAudio amplifier TV Signal DVD/VCR/SAT/STB/PVR 5
Getting Started REAR CONNECTIONS Name POWER HDMI VGA IN SCART S-Video IN Video IN (AUDIO)L/R IN PC Audio IN Headphone RF COAX out Function Description Connect to power supply Connect to the HDMI of your DVD or other equipment VGA signal from computer output Connect to the scart terminal of your DVD/VCR/SAT/STB/PVR S-Video signal input Composite video signal input Audio signal input for above composite video input. PC audio input Connect it to your headphone.
Remote Control Key Functions 1 2 3 SYS-MENU 5 PR 6 INPUT 4 8 DVD 7 9 10 SYS-EXIT DISPLAY 11 12 ASPECT FAV 13 FAV+ DVB DVD RETURN LANGUAGE FAV- 1. POWER: Turn the TV on/standby. 2. buttons for DVD operation : Load/eject DVD disc : Play/pause DVD program : Stop DVD program : DVD fast reverse : DVD fast forward : DVD previous chapter : DVD next chapter 2.
10. DISPLAY: Display current mode information. 1 2 11. SYS-EXIT: Exit the OSD menu. 12. 0-9,-/-Choose channel directly. Number buttons for DVD. Returns to the previous channel. 3 SYS-MENU 5 PR 6 INPUT 4 8 DVD 7 10 SYS-EXIT DISPLAY 9 Buttons for DTV function 11 FAV: Display the favorite program list. FAV+/-: Favorite program up/down. DVB: switch to DVB. 12 ASPECT 13 FAV FAV+ PICTURE: Select the picture mode. SOUND: Select the sound mode. NICAM/A2: Selects Nicam or Mono sound.
Menu Operation Basic TV operation TURN ON THE LCD TV 1. Connecting to the power with the mains adaptor and mains cable, at this time the TV will enter standby mode and indicator shows red. 2. Use POWER button on TV set or on the remote control to turn on the LCD TV from standby mode. TURN OFF LCD TV Press the POWER button on the TV set or on the remote control to enter standby mode. The Indicator goes red.
Press the SYS MENU button to display the main menu. Use ɻ/ɺ buttons to select menu, and press ɽ button to enter the menu.
In this manual, the OSD (On Screen Display) may be different from your TV's because it is just an example to help the TV operation. PICTURE menu options Press the MENU button on the front panel or SYS MENU button on the remote control and then use ɺ / ɻ button to select the Video menu, press ɽ button to enter(see the picture below). PICTURE Personal Picture Mode Contrast 50 Brightness 50 Colour 50 0 Tint Normal Sharpness Select Colour temperature DNR 1.
SOUND menu options Press the MENU button on the top panel or SYS MENU button on the remote control and then use ɺ / ɻ button to select the Sound menu, press ɽbutton to enter(see the picture below). SOUND 20 Volume Personal Sound Mode Bass 50 Treble 50 Balance 50 Select 1. Use ɼ/ɽbutton to select what you want to adjust in the sound menu. 2. Press ɺ / ɻ button to adjust. 3. When you are satisfied with your adjustment, press the SYS MENU button. Adjust Volume Adjusts the volume.
FUNCTION menu options Press the MENU button on the top panel or SYS MENU button on the remote control and then use ɺ / ɻ button to select the Function menu, press ɽ button to enter(see the picture below). FUNCTION Language English Video Size Auto Blue Screen On Child Lock 1. Use ɼ/ɽbutton to select what you want to adjust in the function menu. 2. Press ɺ / ɻ button to adjust. 3. When you are satisfied with your adjustment, press the SYS MENU button.
SETUP menu options(used in TV/DTV source) Press the MENU button on the top panel or SYS MENU button on the remote control and then use button to select the Setup menu, press ɽ button to enter(see the picture below). SETUP UK Country Auto Tuning Manual Tuning Program Edit ɺ / ɻ 1. Use ɼ/ɽ button to select what you want to adjust in the setup menu. 2. Press ɺ / ɻ button to adjust. 3. When you are satisfied with your adjustment, press the SYS MENU button.
Manual Tuning in DTV mode Manual Tuning Channel 32 Start Search Begin Service Found 0 Signal Quality 0% Signal Strength 0% Frequency 474.00MHz Select Enter Channel: Select the current channel. Number of the first group of digital channels if known then the second channel number for the second group of digital channels and so on. However, most consumers don’t know the actual channel numbers for the diffretent digital channel groups in their area.
DVD Operation DVD Operation Press the Power button on the TV or the remote control, then press the INPUT button to select DVD mode. If there is no disc in the DVD player the screen will show "NO DISC". Place a disc Insert a disc according to the instruction by the slot. Do not touch the playing surface. Hold the disc around the outside with your fingers and place the disc into the slot. The player will automatically draw the disc into the player.
Additional operation 5. According to the Direction Indicator on the menu, you can press Arrow buttons to highlight where you want to enter. 6. During Program Playback, if program button is repressed, the program order and the contents will be displayed on the screen, and the Program Playback will be stopped; also you can press Stop and Play to resume normal playback. 7. Notes: To clear the program order, use Arrow buttons to highlight the "CLEAR" item, then press Enter.
Additional operation 2. While a disc is playing, press Repeat button once and the repeat banner appears to show current repeat mode. a) In SVCD, VCD, CD, HD-CD, WMA or Digital Audio disc/JPEG sequence playback mode. Press Repeat button again to turn on repeat mode. Press the button again on the remote to turn to the next repeat mode. There are three repeat options: Off, Track Repeat and Disc Repeat. With each consecutive press of the button, the repeat mode switches.
Additional operation 3. Notes a) This feature does not work in Program Play mode. b) If PBC is on, it will turn off automatically when Search Playback starts. c) When playing WMA, MP3 / JPEG discs, Search Feature does not work. Changing the Soundtrack or Language 1. Compatible with DVD SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs. 2. Press the LANGUAGE button to display current soundtrack. a) Press the button to switch soundtracks.
DVD System Operation 3. The player will then start to play the first track, of the selected directory. 4. To change directories use the direction buttons. DVD System Operation System operation will define the setting of the set; these definitions will be stored until you change them again. General Steps of Setup Menu 1. Pause or Stop the player. Press SET on the remote control. The main menu will be shown as below. 2. Press the ɼ/ɽ(PR+-) buttons to select the Icon of the desired section, e.g.
DVD System Operation RATING The Rating feature is a rating limit feature, like movie ratings. This helps you to control what DVD the family watches. There are 8 levels of selection, from KIDS SAFE to ADULT. Adult is the "play all" selection. 2. LANGUAGE SETUP The language setup options are illustrated below: - OSD LANGUAGE: The OSD will display in the language you choose. - AUDIO LANG: If the disc you are playing has the language you choose, it will output audio in that language.
Disc Care Disc Care About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections, "title". Chapter The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching, but some discs may not have a recording chapter. Track A segment of picture or music on a CD, Each track is numbered for searching.
Simple Troubleshooting Simple Troubleshooting changes SYMPTOM REMEDY GENERAL Dead. No LED Lit Dead Led lit red Blue screen. No power to the TV. Set still in standby. No signal. Incorrect source selected. No sound Press INPUT button to select correct source. If using an indoor aerial, try moving the Noisy, snowy, ghosting picture (TV) Check all connections to the TV including the AC adaptor. Press either the Power button on the TV or the Standby button on the Remote control. Poor aerial signal.
Techincal Specifications Techincal Specifications TV TVSystem Screen size Resolution Aerial input Audio output power PAL/SECAM, BG/DK/I 22"(diagonal) 1680x1050pixels (RGB) (unbalanced) 75 2x3 W Power Consumption 5A 60W Remote control Type Control distance Control angle Batteries Dimensions Weight infrared 5m 30° (horizontal) 2 x 1.
