PLASMA DISPLAY USER’S MANUAL D T- 4 2 8 0 N H D T- 4 2 2 0 N H Proper use guarantees product life. Helpline Number : 0870 100 2525 Before using the product, be advised that you read this owner’s manual well and try to operate it.
Features • 42” VGA wide Plasma Panel • Built in Analog Tuner PDP has the analog tuner inside for watching terrestrial broadcasting without the need to purchase a separate broadcasting receiver. • DVD Direct Connection / Outstanding Picture Quality via a Digital Broadcast Receiver A DVD can be directly connected to the unit so that you can view clear digital images. You can enjoy even higher quality images by connecting a digital broadcasting receiver with which digital broadcasts can be viewed.
Safety Precautions Power Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet. • Do not disassemble or replace any parts of the TV. Refer to a qualified service personnel for repair. During a lightning storm, or when it is left unattended and unused for a long period of time, unplug it from the wall outlet.
During Use The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not open the cover (or back) because high voltage is present within the TV enclosure. Never push any kind of objects into this product through openings at the back of TV. It may cause electric shock. It may cause fire or electric shock. Do not allow children to play or hang on the TV. Do not place a candle or lighted cigarette on the TV.
Safety Precautions Power Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. CAUTION You can be injured, or this product or any other of your property can be damaged if you don’t follow instructions. When moving your TV, remove the power plug, antenna, and cables, and be sure to move it by using two people.. Do not touch the power plug with wet hands when plugging or unplugging it into the wall socket.
During Use Do not wipe the TV using a cloth damped with chemicals (benzene, thinners, etc.). Do not place heavy objects or heat sources on the power cord. The TV appearance may be marred. (Unplug the power plug and wipe with soft cloth.) It may damage the power cord, causing fire or electric shock. Do not place any object or cover on the TV. When watching the TV, the distance between the TV screen and your eye should be as 5~7 times as the diagonal distance of the TV.
Checking Accessories Note Check to be sure that the following items are packed with your Plasma panel. Supplied Accessories Remote Control TV DVD VCR/ SAT Ferrite Core 3UNITS CATV STIL REC 1 UNIT L ALL TIME MUL PR DIA + ZOO M - ZO OM MEN V O L U PR EV CR EE N SIZ E V O L S PR PR SLEE P ? X . PICTE MOD I-II ND SOU E MOD OW F.R/SL PLAY OW F.
Note The following items are optional accessories. Refer purchasing optional accessories from Daewoo Electronics Local retailer or the retailer from where you purchased the unit. Optional Accessories Speakers DT-P20J - Speaker Main Unit Dimension : 100(W) x 628(H) x 83(D) mm 39.37(W) x 24.72(H) x 3.27(D) inch - Dimension Including Speaker Stand : 170(W) x 729(H) x 194(D) mm 6.69(W) x 28.7(H) x 7.64(D) inch - Audio Amplifier : 10W + 10W - Impedance : 8Ω - Weight : 6.4kg(14.
CONTENTS PREPARATION 4 • 8 • 12 • 13 • 14 • Safety Precautions Checking Accessories Panel Controls Remote control Remote control setup CONNECTION 15 • 18 • 20 • 26 • 28 • 30 • 32 • 34 • 36 • 38 • 40 • Antenna Connection To Watch TV Install Program Watching Digital Broadcasts Watching Cable Broadcasts Watching Satellite Broadcasts Watching a DVD Image Watching a VCR Image Watching a Camcorder/Game Console Image Connecting PC(15Pin D-Sub) Connecting PC(DVI) APPLICATION 43 • Selecting Picture Mode 44 • Cu
Panel Controls Front Panel, Back Panel, Remote Control having same names on Plasma display and the remote control would function in exactly * Items the same way. Front ON/OFF STAND BY/OPERATE Power control sensor Power Standby: Red - Standby Green - ON Power button ON/OFF STAND BY/OPERATE Select when adjusting volume or select/adjust “MENU.
Remote Control Note • Use two “AAA” batteries. • Be sure to use replacement batteries of the same type as the original ones. • The life of a battery depends on how much it has been used. ) indicates the page in which * The number in ( the function of each button is explained in detail. 19 Pressing the Power button of the TV allows the Display to be be in standby. (A red light is shown in the Remote Control Sensor.
Remote Control Setup Remote control supporting the multi brand devices. - The remote control provided is designed to operate the Daewoo PDP set. - However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting Receiver of other brands after setting up the remote control. Notices: - All the preset codes are erased when replacing the battery. In this case, you must set the remote control again.
Antenna Connection Indoor Antenna Connection WHEN THE IMAGE IS NOT CLEAR Unclear screen image and bad reception may be caused by wrong antenna connection. Be sure to check its direction or installing place. 1. Connect the back of the TV set.
CTV Antenna Connection TV Antenna installation may be found in most. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fix it firmly. It is recommended to use the provided coaxial cable.
Outdoor Antenna Connection Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection. VHF Antenna UHF Antenna ANT/CABLE 1 Separate Antenna Connection.
To Watch TV To Watch TV - The buttons on the keypad in the PDP unit, which have the same name as those on the remote controller, perform the same function as the remote controller. Press the “ON/OFF” button of the PDP unit. •The “ PR ” or power button of the remote control and the keypad on the PDP unit would be operated only when the "AC Power" of the PDP unit is supplied. Otherwise, neither the remote controller nor keypad of the PDP unit can turn on the PDP.
1 Press the “ON/OFF” button. • Press the “ON/OFF” button of the PDP unit. • The LED of the PDP unit turns on red colour. • Press the “ PR ” , power button of the remote control, or any button on the keypad of the PDP unit. • The LED of the PDP unit turns on “green” colour and the TV • To watch analog TV broadcasts, select the correct input, i.e. 'PR' in the on screen display box.. ON/OFF 2 Select Program.
Install Program Auto Setup - This is the function for the TV to memorise the broadcasting channels. If the Auto Setup is done, you can simply find out programs with “ PR ” buttons and so need not to select programs by pressing each program number. - Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the “ PR ” button or Number buttons to scan the stations you programmed.
• Select the “Auto Setup” with the “ PR ” button. • Then press the “ VOL ” button. ZO + ZO O PR M M O 3 Select the “Auto Setup”. V O L V O L Manual Setup Screen N E PR V Edit Sound SI ZE MENU Auto Setup Picture PR PR E RE SC Features Install Select Move Exit Select the “Country”. • There are 18 countries for selection. Choose the desired country before starting the search. • If there is no proper country, select the "Others".
Edit PR ZO + ZO O M M O 1 Deleting the program. V O L V O L V N E PR SI ZE MENU • Place the selection bar in the program that you want to delete using the “ PR ” buttons. • Press the Delete(Yellow) button. • The deleted program goes to PR number 99 for recover. PR PR E RE SC X PICT. MODE TV VCR/DVD SAT RECALL SOUND MODE I-II CATV 2 STILL SLEEP ? PICT. MODE ZO PR + SLEEP ZO M M O 3 ? V O L SI ZE E PR V PR PR SOUND MODE I-II F.R/SLOW PLAY F.
Manual Setup ZO Manual Setup V O L V O L Sound Program 01 Channel C06 _ _ _ _ _ Name System Screen GB Fine Tune 48 N E PR SI ZE MENU V Picture + ZO O PR M M O 1 Press the Number buttons(0~9) or the “ VOL ” button to select a program number you want. E RE SC PR PR Search Features Memory Install Adjust Move Adjust MENU Exit 0~9 TV VCR/DVD SAT Find the desired channel.
Manual Setup 4 Check the System and Fine Tune. • You can select the country with the "System" function. However, if you had Auto Setup previously, the country of the "System" will be chosen automatically. • If you are unable to get a good picture or sound because of a poor signal reception, it is possible to adjust it with "Fine Tune", which is refered in the next page.
Fine Tune - If you are unable to get a good picture or sound because of a poor signal reception, it is possible to adjust it with the Fine Tune feature.. ZO Manual Setup V O L V O L Sound Program 01 Channel C06 _ _ _ _ _ Name System Screen GB Fine Tune 48 N Search Features Memory Install Move MENU Exit Note that it operates while the “ button is being pressed. ” ZO + V O L V O L MENU E PR V VOL • It will be saved only when you select "OK" in Memory.
Watching Digital Broadcasts Watching Digital Broadcasts • To watch digital broadcasts: - Purchase a separate digital Broadcasting Receiver(SET-TOP BOX) - Connect the PDP to a Digital Broadcasting Receiver as shown right. TV VCR/DVD SAT RECALL 1 Connect a Digital Broadcasting Receiver to the PDP • Prepare supplied A/V cables. • Connect the cables from the Digital TV Receiver output terminal to the PDP(Component 1, 2) input terminal. • When connecting the cables, be sure to match the cable colours.
3 Input Select MULTIMEDIA • Select [Component 1 or Component 2] by pressing the “Multimedia” button of the Remote Control or using the “INPUT SELECT” button of the PDP unit. • Each time you press the “Multimedia” button, different input modes appear. The sequence is as follows: 4 Component1 Component2 PC DVI Select a Desired Channel and Function • Select a desired channel and function by using the Remote Control of the Digital Broadcasting Receiver.
Watching Cable Broadcasts Watching Cable Broadcasts • To watch cable broadcasts, subscribe to your local Cable TV Broadcasting, and then connect a cable Broadcasting Receiver TV to the PDP as shown right. TV VCR/DVD SAT 1 Connect a Cable Broadcasting Receiver to the PDP. • Prepare the A/V cable. • Connect the receiver(Output) to PDP(Video Input) as shown below. • While using the scart cable for connection, put the ferrite core to the middle of the cable to prevent EMI (Electro Magnetic Interference).
3 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV3(S-Video)] by pressing the [ ] button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP unit. • Each time you press the [ ] button, different input modes appear. The sequence is as follows: 4 AV1 AV2 TV AV(S)3 Select a Desired Program and Function • Select a desired Program and function by using the Remote Control of the Cable Broadcasting Receiver.
Watching Satellite Broadcasts Watching Satellite Broadcasts • To watch satellite broadcasting, subscribe to Digital Satellite Broadcasting, then connect satellite Broadcasting Receiver to the PDP as shown right. TV VCR/DVD SAT 1 Connect a Satellite Broadcasting Receiver to the PDP. • Prepare the A/V cable. • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colours.
3 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV3(S-Video)] by pressing the [ ] button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP unit. • Each time you press the [ ] button, different input modes appear. The sequence is as follows: 4 AV1 AV2 TV AV(S)3 Select a Desired Program and Function • Select a desired program and function by using the Remote Control of the Satellite Broadcasting Receiver.
Watching a DVD Image Watching a DVD Image • Component Input is set to 480i and 480p mode. • Connect the cable from the DVD Video Output (Y, Pb/Cb, Pr/Cr) to the Component Input at the back of PDP, and connect the cable from DVD Audio output (Left, Right) to the Audio Input at the back of PDP. TV VCR/DVD SAT 1 Connect a DVD Player to the PDP. • Prepare the AV cable. • Connect the DVD(Output) to the PDP(Component or Video Input) as shown below.
3 Input Select MULTIMEDIA • Select [Component 1 or Component 2, AV1(Scart), AV2(Scart) or AV3(S-Video)] by pressing the “MULTIMEDIA” or “ ” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP unit. • Each time you press the “MULTIMEDIA” or “ ” button, a different input mode appears.
Watching a VCR Image 1 Watching a VCR Image • Video can use either the video terminal or the S-video terminal. TV VCR/DVD SAT Connect a VCR to the PDP. • Prepare the AV cable. • Connect the Video(Output) to PDP(Video Input) as shown below. • While using the scart cable for connection, put the ferrite core to the middle of the cable for preventing EMI.
3 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV 3(S-Video)] by pressing the [ ] button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP unit. • Each time you press the [ ] button, different input modes appear. The sequence is as follows: 4 AV1 AV2 TV AV(S)3 Select a Desired Title and Function • Select a desired title and function by using the Remote Control of the VCR. NOTES: 1) When connecting a Video, the S-Video terminal provides a better image than the Video terminal.
Watching a Camcorder/Game Console Image Watching a Camcorder/Game Console Image • Enjoy images recorded by camcorder or the game console after connecting to the PDP. TV VCR/DVD SAT 1 Connect a Camcorder/Game Console to the PDP. • Prepare the AV cable. • Connect the Video(Output) to the PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colours. • While using the scart cable for connection, put the ferrite core to the middle of the cable for preventing EMI.
3 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV 3] by pressing the [ ] button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP unit. • Each time you press the [ ] button, different input modes appear. The sequence is as follows: 4 AV1 AV2 TV AV(S)3 Select Function • Select the Function by using the Remote Control of Camcorder or Game Console. NOTES: 1) When connecting a Video, the S-Video terminal provides a better image than the Video terminal.
Connecting PC(15pin D-sub) Connecting PC • This product supports resolution of VGA, SVGA, XGA, SXGA. • Before connecting a PC to the PDP, be sure to adjust the resolution of PC. TV VCR/DVD SAT RECALL 1 Before connecting to the PDP, set the resolution of the PC. • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY Menu. • In the SETTINGS Menu, select 640 x 480 or 800 x 600. 2 Connect the PC to the PDP.
3 Press the Power Buttons. • Turn on the PDP and the PC. 4 5 Input Select MULTIMEDIA • Select [PC] by pressing the “MULTIMEDIA” button of the Remote Control or PDP unit. • Each time you press the “MULTIMEDIA” button, a different input mode appears. The sequence is as follows: Component1 Component2 DVI PC Enjoy Dynamic Ultra Screen Monitor by Using PC’s Keyboard or Mouse. NOTES: 1) The resolution of the PC monitor is the best at 640 x 480 (VGA).
Connecting PC(DVI) Connecting PC • This product supports resolution of VGA, SVGA, XGA, SXGA. • Before connecting a PC to the PDP, be sure to adjust the resolution of PC. • This product is supported by Plug and Play only at DVI. TV VCR/DVD SAT RECALL 1 Before connecting to the PDP, set the resolution of the PC. • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY Menu. • In the SETTINGS Menu, select 640 x 480 or 800 x 600.
3 Press the Power Buttons. • Turn on the PDP and the PC. 4 5 Input Select MULTIMEDIA • Select [DVI] by pressing the “MULTIMEDIA” button of the Remote Control or the Input button on the PDP unit. • Each time you press the “MULTIMEDIA” button, a different input mode appears. The sequence is as follows: Component1 Component2 DVI PC Enjoy Dynamic Ultra Screen Monitor by Using PC’s Keyboard or Mouse. NOTES: 1) The resolution of the PC monitor is the best at 640 x 480 (VGA).
PC and DVI Input Resolution Available in PDP • Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card company for help. Resolution 640x400 H Freq. (KHz) 37.861 V Freq. (Hz) 85.080 Remark VESA DVI PC O 31.469 59.940 DOS O O 37.861 72.809 VESA O O 37.500 75.000 VESA O O 43.269 85.061 VESA O O 31.469 70.087 IBM O O 37.927 85.039 VESA 35.156 56.250 VESA O O 37.879 60.317 VESA O O 48.
Selecting Picture Mode • Select the Picture mode that is appropriately set depending on the kinds of pictures, and enjoy them. Each Press of the Button Will Select One of Four Picture Modes. Normal * Normal : * Dynamic: Dynamic Cinema TV VCR/DVD SAT User MULTIMEDIA PR M ZO - V O L V E RE SC PR PR • After selecting a desired Picture mode, the menu on the screen will disappear. • Normal, Dynamic, and Cinema Modes are factory preset values.
Customising Picture 1 Press the MENU Button. • The MENU shown below will display on the screen. PR M V O L SI ZE Sound Brightness 32 Contrast 48 Colour 32 N E PR V Picture V O L MENU Normal Mode + • You can adjust the colour tone and brightness to your preference. ZO M O ZO O Customising Picture E RE SC PR PR Sharpness Screen 32 Colour Temp. Normal Features Install Select Move TV VCR/DVD SAT 2 MULTIMEDIA ZO V O L Button.
• While you are in [Picture Mode – User], press the “ PR ” buttons to select a specific adjustment item. PR ZO M M O + ZO O 4 Select User Mode Adjustments V O L V O L N E PR V PR PR User Mode Picture SI ZE MENU E RE SC Sound Brightness 32 Contrast 60 Colour 40 Sharpness Screen Colour Temp. 48 Normal Features Install Move MENU Exit Picture Condition Adjustments • Press the “ VOL ” buttons to adjust the picture of your preference.
Adjusting Screen Size (Component, AV, TV) Adjusting with Screen Size button TV VCR/DVD SAT RECALL N SI ZE • You can adjust screen size or aspect ratio as desired. 1 Press the SCREEN SIZE Button. E RE SC • Each time you press the SCREEN SIZE button on the Remote Control, a different SCREEN SIZE appears. The sequence used is as follows: • The current screen size will be displayed on the screen.
1 Press the MENU Button. Adjusting from MENU Screen • Press the [MENU] button on the Remote Control. ZO M O V O L SI ZE Sound Brightness 32 Contrast 48 Colour 32 Sharpness 32 • Available Screen Mode N E PR V Picture V O L MENU Normal Mode + ZO O PR M E RE SC PR PR Screen Colour Temp. Normal Input Available Mode DVI H, V Size PC H, V Size and Features Position, Phase, Install Frequency Select Move 2 MENU Exit Component 16:9, Select “Screen”.
Adjusting Screen Size (PC, DVI) 1 Press the MENU Button. • The MENU screen as shown below will appear. PR + V O L SI ZE Picture Sound N V E RE SC PR PR Normal Mode V O L MENU E PR • You can adjust the screen position and size as desired. ZO M M O ZO O Adjusting Screen Position and Size Brightness 32 Contrast 48 Colour 32 Sharpness Screen Colour Temp.
PR ZO M M O + ZO O V O L V O L E PR V SI ZE MENU N 3 Press the Volume “ VOL ” Buttons. PR PR E RE SC • Press the Volume “ VOL ” buttons to enter the sub menu “Screen”. • While you are in ‘Screen’ mode, press the “ PR” or “PR ” button to select a desired item, and then, adjust the value by pressing the “ VOL” or “VOL ”. Picture Sound Screen H. Size 32 V. Size 32 H. Position 32 V.
Enlarging Screen Size RECALL + TV VCR/DVD SAT ZO M O • You can view enlarged size of the screen with this function 1 Press the “ZOOM+” Button. ZO O Enlarging Screen Size M • Press the “ZOOM+” button to show currently selected screen size. • Each time you press the “ZOOM+” button, the screen size will increase stepwise in 0 ~ 20 scale. • To reduce the screen size, press the “ZOOM-” button.
• While you are in the ‘Zoom’ mode, press the “ PR ”, “ VOL ” buttons to move screen stepwise up/down and left/right, respectively. PR ZO M M O + ZO O V O L V O L E PR V SI ZE MENU N 2 Move the Screen Position. PR PR E RE SC Zoom 6 NOTES: 1) When the screen is enlarged, the pixel of the screen can become thick and dim. 2) When only subtitle of zoom level remains, you can scroll the image. If subtitle of zoom level disappears, press zoom key, and scroll the image.
Watching a STILL Image Watching a Still Image 1 Press the “STILL” Button. • If you wish to freeze a picture, press the “STILL” button. You can still hear the sound. • Press “STILL” button again to cancel the “STILL” function. • To view the enlarged images, press the “ZOOM+” button. STILL • You can view still images with this function. However, displaying the same images such as still images for a long time may cause image burn.
Adjusting Auto Sound Mode 1 Select “SOUND MODE”. SOUND MODE 2 Adjusting Auto Sound Mode • Press the “SOUND MODE” on the Remote Control. • While pressing the “SOUND MODE” for the first time, the current Sound Mode will be displayed. • Enjoy various sound modes by selecting your favorite Sound Mode depending on the kinds of moving pictures. Every Press of the Button Changes Modes. SOUND MODE TV VCR/DVD SAT CATV • Each time you press the button, a different sound mode appears.
Customising Sound Mode 1 Press the MENU Button. • The MENU Screen as below will be displayed. PR M O V O L SI ZE Sound Brightness 32 Contrast 48 Colour 32 N E PR V Picture V O L MENU Normal Mode + • This feature allows the user to adjust for his preference. ZO M ZO O Customising Sound Mode E RE SC PR PR Sharpness Screen Colour Temp.
4 Select the Effect Mode. • Select [Effect] by pressing the “ PR ” buttons, then select ON/OFF by pressing the “VOL ” button. • [Effect]: Used to emphasize stereo effect. ZO M M O + ZO O PR V O L V O L Balance Effect AVC Mode 120Hz 500Hz 1.
Selecting INPUT SIGNAL INPUT SIGNAL TV VCR/D VD SAT • Used to select INPUT signal of external device connected to the PDP. CATV REC ALL STIL L MUL TIME DIA PR OM ZO + OM ZO V O L MEN U PRE V O L R E VP PR IZ NS EE SCR SLEE P ? X PIC MODT. E SOU MODND E I-II F.R/S LOW PLAY 1 Press the “MULTIMEDIA” or “ ” Button. • Press the “MULTIMEDIA” or “ ” button on the Remote Control or the PDP Display to select desired input signal.
•“ ” button AV1 AV2 TV AV3 • “MULTIMEDIA” button Component1 Component2 DVI PC Component 1 NOTES: 1) If an external device is not connected or INPUT signal is not applied, Warning Message (“No Signal”) would be displayed. 2) In this case, check if external device is connected and/or terminal connection is properly done. 3) Also, you can select input using [INPUT SELECT] button in the keypad of the PDP unit.
Checking the Current Input Signal Checking the Current Input Signal 1 Press the RECALL Button. RECALL • Press the [RECALL] button on the Remote Control. • Used to check the INPUT signal mode, resolution, frequency(video only), etc. of the current screen. TV VCR/DVD SAT Component 1 1920 x 1080 CATV 1. If you watch Component, PC, or DVI : RECALL STILL MULTIMEDIA Component 1 1920 x 1080 Displays which input terminal is used, and indicates the input signal mode.
MENU Background, Language and Child Lock Setting Selecting Languages • The MENU screen will be displayed as below. PR ZO M V O L V O L Sound SI ZE MENU E RE SC PR PR Brightness 32 Contrast 48 Colour 32 Sharpness N E PR • Used to select transparent of MENU background and language used in MENU. + Picture V Normal Mode M O ZO O 1 Press the MENU Button. Screen Colour Temp. 32 Normal Features Install Select Move Exit Press the “ PR ” Button.
MENU Background, Language and Child Lock Setting 4 Select LANGUAGE by using the “ ZO M O + ZO O PR M V O L V O L N E PR V • Select LANGUAGE by using the “ PR ” button. • Every press of the “VOL ” button while you are in the [LANGUAGE] mode would cycle through the different languages. SI ZE MENU PR PR E RE SC Picture Sound Screen TV VCR/DVD SAT PR ” Button.
MGDI (Meta Genuine Digital Image) MGDI is the image enhancement technology of Daewoo Electronics, which provides more clear, splendid, and delicated images. MGDI Demo • The MENU screen will be displayed as below. PR ZO M M O Picture V O L V O L MENU E RE SC PR PR Brightness 32 Contrast 48 Colour 32 Sharpness N E PR SI ZE Sound V Normal Mode + ZO O 1 Press the MENU Button. Screen Colour Temp.
Auto Power Setting 1 Auto Power Setting • Select the [Auto Power] by pressing the “ M + V O L V O L N V PR PR ” button • You can select [Auto Power] ON and OFF mode by using the “VOL ” button. SI ZE MENU E PR • When the AC power is on : Green. • When the AC power is in the standby mode : Red. ZO M O Front panel LED lights PR from [Features].
Time Setting • The MENU screen will be displayed as below. PR ZO M + Picture V O L V O L MENU E RE SC PR PR Brightness 32 Contrast 48 Colour 32 Sharpness N E PR SI ZE Sound V Normal Mode M O ZO O 1 Press the MENU Button. Screen Colour Temp. 32 Normal Features Install Move 2 Select MENU Exit TV VCR/DVD SAT CATV Select Features • Select [Features] by the “ ”button.
Time Setting • Select Functions by pressing the “ PR ” button. First, set [Clock]- current time, and then You can setup off-time and wake time. PR ZO M O M + V O L V O L Picture N V SI ZE MENU E PR • The “Current time” must be set up ahead of setting up other time memories. 4 Off-Time and Wake time setting ZO O Time Setting PR PR E RE SC Sound Screen Time Setting AM 11 : 50 Clock Off Off Timer AM 12 : 00 Off Time Off Wake Timer AM 12 : 00 Wake Time 2 Wake Pro. Wake Vol.
Image Sticking Minimisation(ISM) • The MENU screen will be displayed as below. ISM PR ZO M + Picture V O L V O L Sound E RE SC PR PR Brightness 32 Contrast 48 Colour 32 Sharpness N E PR SI ZE MENU V Normal Mode M O ZO O 1 Press the MENU Button. Screen Colour Temp. • Image burn minimisation. • Displaying a still image like PC input for a long time causes part image sticking in the panel • The ISM function minimise this effect.
Image Sticking Minimisation(ISM) 4 Select Functions. • Every press of the “VOL ” button after select function by the “ PR ” button would switch between ON/OFF. ZO M M O + ZO O PR V O L V O L ISM N E PR V SI ZE MENU PR PR E RE SC Picture Pixel Shift Low Bright Off Off Sound Screen TV VCR/DVD SAT Features CATV Install Move RECALL Adjust MENU Exit STILL MULTIMEDIA ZO - M O + ZO O PR M V O L SI ZE N E PR V E RE SC PR PR SLEEP X SOUND MODE I-II F.
Initialise Setting • The MENU screen will be displayed as below. Back to Initialisation PR ZO M + Picture V O L V O L MENU PR PR Brightness 32 Contrast 48 Colour 32 Sharpness N E PR SI ZE Sound V Normal Mode M O ZO O 1 Press the MENU Button. E RE SC Screen 32 Colour Temp. Normal • You can restore the values of the adjustment setting made in the MENU to factory settings.
Initialise Setting • Enter the sub Menu by using the “VOL ” button. • Select the [Initialise] by pressing the “ PR ” button, then press the “VOL ” button. • A confirmation message will be displayed. • To perform initialisation, press the “VOL ” button after selecting [YES] by the “ PR ” button. • To return to MENU, press "MENU" button.
Setting Sleep Timer Setting Sleep Timer • SLEEP TIMER turns the PDP off after a preset time. TV VCR/DVD SAT CATV S l e e p O ff RECALL STILL MULTIMEDIA PR Sleep Timer 90 V O L V O L V SI ZE MENU E PR Sleep Timer 15 Sleep Timer 120 + off ZO - M O Sleep Timer M N SLEEP • Press the “SLEEP” button on the Remote Control. • Pressing the “SLEEP” button first time will display the current setting for SLEEP TIMER. • To cancel the SLEEP TIMER, press the “SLEEP” button to select ‘OFF’.
Teletext Switching Teletext ON/OFF • Press the Text button ( ) The index page or the page viewed last will appear. Press the Text button again to return to the TV mode. Colour buttons in TOP/FLOF Teletext TV VCR/DVD SAT • A red, green, yellow and cyan field is shown at the bottom of the screen. If TOP or FLOF Teletext is transmitted by the station, pressing the corresponding colour button on the remote controller, you can select the desired page easily.
Calling Up Subpage Directly • Pressing the Subpage( ) button. The subpage number is displayed at the bottom of the screen. To change the subpage press the Red(-) / Green(+) buttons. Enter the subpage number that you want to call up with the Page selector button 0~9, for example, the 2nd page, sequence 0002. The desired subpage will eventually be displayed on the screen and holds it there. Press this button again to exit this function.
Before Requesting Service Before requesting for service, check the following points once again. St y o mm ps • Remote control does not function properly. • The Display makes a snapping sound. • There are empty spots at the top and the bottom area of the screen. C h e c k s • Check for any obstacle between the Remote Control and the Display. • Check for dead batteries and incorrect battery orientation. • Check if the Remote Control is the right one. • Check if the pictures and sound are normal.
SPECIFICATIONS DISPLAY UNIT Diagonal Size 106cm (42 ) Screen Aspect Ratio 16 : 9 System PAL B/G, I/I, SECAM B/G, D/K, L/L’ Display Resolution 853(H) 480(V) dots Pixel Pitch 1.08(H) 1.08(V) mm Dimension 1044(W) 631(H) 89(D)mm 41.10(W) 24.84(H) 3.50(D)inch Weight 30kg (66.13Lbs) Power Requirement 100-240V~, 50/60Hz * Appearance and specifications of this product are subject to change for improving the product without prior notice.