Operation Manual

29
1. Press P.MODE and to select the
program function.
2. Press ENTER.
3. Press
to highlight “- -” below T,
then enter the title number.
Press
to highlight “- -” below C,
then enter the chapter number.
Press ENTER to confirm.
4. Repeat step 3 to select the next title and
chapter.
You can combine your favorite titles, chapters, or tracks and play them in any order. You can program up to 16
selections into the memory (Memory playback).
Title : 2Title : 2
Chapter : 25Chapter : 25
Title : 2
Chapter : 25
Title : 2Title : 2
Chapter : 12Chapter : 12
Title : 2
Chapter : 12
Title : 1Title : 1
Chapter : 1Chapter : 1
Title : 1
Chapter : 1
Setting Titles, Chapters, or Tracks in a Favorite Order
The machine automatically plays titles, chapters, or tracks
in the order you program.
To change or cancel the entered program
1. Follow steps 1 and 2.
2. Press
to select change or cancel the entered
program.
3. To change the entered program, follow step 3 or to
cancel, press CLEAR on the Remote Controller.
4. Press
to select the <OK>, then press ENTER
to confirm program play mode.
Then the machine restarts program playback.
To clear the entered program
1. Follow steps 1and 2
2. Press
to select the <CLEAR>, then press
ENTER to confirm program clear.
Notes
Some discs may not permit memory playback operation.
If you press REPEAT during memory playback, the DVD
Receiver repeats the current memory playback.
You cannot select title, chapter, and track numbers not
included on the disc.
The programmed selections will be cleared when you stop,
open the tray or turn off the machine.
T: Title number
C: Chapter number
To display the entered program
1. Follow steps 1 and 2.
2. To disappear the entered program display.
Follows below steps:
select <BACK>
press ENTER select
<EXIT>
press ENTER.
5. Press to select the <OK>, then
press ENTER to confirm program play
mode.
The machine starts program playback and
PGM indicator appears in the machine’s
display.
28
You can play a specific title, chapter, track or segment repeatedly (Title repeat, chapter/track repeat, all tracks and A-B repeat).
You can play the same title, chapter, or track repeatedly
(Title, chapter/ track repeat).
Repeating a Title, Chapter, or Track
1. Press P.MODE and to select
the repeat function.
2. Press ENTER.
Each time you press ENTER, the repeat
mode changes as follows.
When use DVD:
[CHAPTER] repeat a current chapter
[TITLE] repeat a current title
When use Video CD/Audio CD
[ONE] repeat current track
[ALL] repeat all tracks
3. Press
to select the <OK>, then
press ENTER to confirm repeat play
mode.
To resume normal playback
In play mode status screen, select to
REPEAT : [OFF], and confirm it referring
to above described repeat playback.
Notes
Some discs may not permit repeat operation.
Repeat play works only with discs for which the
elapsed playing time appears in the machines
display during playback.
1. Press A-B at the beginning of the
segment (point A) you want to play
repeatedly.
2. Press A-B again at the end of the
segment (point B).
The machine automatically returns to point
A and starts repeat playback of the
selected segment (A-B).
To resume normal playback
Press A-B repeatedly until “REPEAT A-B
CANCELLED” displayed on screen or
disappear “REPEAT A-B” indicator in the
machine’s display.
Repeating a Specific Segment
You can play a specific segment repeatedly (A-B repeat).
Notes
Some discs may not permit A-B repeat operation.
You can play a specific segment only within the current
title or track.
You cannot set the A-B repeat function for segments that
include multiple camera angles.
There may be a slight difference between point A and the
location where playback actually resumes depending on
the disc.
Tip
When use Video CD/Audio CD, you can select repeat
function by pressing REPEAT repeatedly.
Playing Repeatedly
Playing in a Favorite Order
Advanced DVD/Audio CD
Operation