A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` A Owner’s Manual DVD-VIDEO PLAYER Model : DV6T834N / DV6T834B DV6T844N / DV6T844B DV6T854N / DV6T854B DV6T864N / DV6T864B DV6T935N / DV6T935B DV6T945N / DV6T945B DV6T955N / DV6T955B DV6T965N / DV6T965B ◆ In the initial settings, exclusive channel for DVD/Video is set to CH 3. Set the TV channel to CH3 before using it. ◆ Region code of DVD/Video player for home is 1 or ALL. In inserting a disc with other region code, it does not operate.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 1 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 2 Important Safeguards This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 3 information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See example as shown.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 4 Advantages of This Product Are .....
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 5 PRODUCT INFORMATION Read Carefully before Using Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player. Installation place and handling ¥ When you place this player near other devices, they may affect poorly together. ¥ When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures or failure (tape is not ejected).
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 6 Contents PRODUCT INFORMATION Important Safeguards ................................. 1 Advantages of This Product Are .... ............... 4 Read Carefully before Using ......................... 5 Contents ................................................ 6 Identification of Controls ............................ 7 Remote Control ...................................... 10 DVD OPERATION Playing a desired scene..............................
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 7 PRODUCT INFORMATION Identification of Controls Front panel ! $ % @ ^& * ! Power (STANDBY/ON) button Use to power the device on/off if AC power supply is connected. @ Place to insert videotape # Disc tray $ Video input jack % Audio input jack ^ Eject button & Record button * Channel Up/Down button ( Operation Display Window Display operation of device. For more information, see ÒOperation Display WindowÓ in the next page.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 8 Identification of Controls Operation Display Window VCR Operation REC and TIMER REC display Recording , TIMER Recording , To be Timer-recorded, To be Timer-recorded state ERROR (No Tape or Tape without tab) AM Progressive Scan dts Disc Indicator Track Chapter This is displayed in DVD disc.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 9 Rear Panel ! #$ % ^& @ ! Power Cord * ( $ COMPONENT Out Jack It is a jack for supplying power to the unit. Connect to outlet in a wall. To obtain better screen quality, connect the unit to TV or monitor with COMPONENT(480i) input. @ Digital Output (COAXIAL) Jack To enjoy sound quality of theater level in home, connect this jack with amp or unit embedded with digital audio decoder.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 11 PRODUCT INFORMATION Connecting with TV ■ In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in ÒCHANNEL SETÓ screen in VCR operation. ■ In connecting RF cable to TV, set TV channel to CH3. INSTALLATION Various methods in connecting with TV ANT INPUT Method 1 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A/V INPUT CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 12 Connecting with Cable Box ■ You should install a distributor additionally. How to connect INPUT 1 INPUT 2 IN OUT RF Cable ANT IN RF Cable RF Cable OUT IN OUT RF Cable AUDIO/VIDEO Cable If your cable system only requires you to use a converter box for some channels (i.e.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 13 Connecting with Other Video Equipment ■ You can connect a wide variety of audio/video equipment to your DVD-Video, including : an additional VCR, Laser Disc Player, DVD Player, Camcorder, Satellite Receiver, Video Game. Since all of these devices use essentially the same connections, they will be described together. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 14 Connecting with an Analog Audio CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). ANT INPUT How to Connect NO USER SERVICEABLE PARTS INSIDE. 20 18 19 16 17 14 15 12 13 10 11 8 9 6 7 4 5 3 3 1 S-VIDEO AUDIO INPUT 21 S-VIDEO INPUT REFER SERVICING TO QUALIFIED SERVICE PRESONNEL. 1 2 3 AUDIO Connect Audio jack.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 15 Connecting with a Dolby Digital decoder or DTS decoder How to Connect 20 21 18 19 16 17 14 15 12 13 10 11 8 9 6 7 4 5 3 3 1 VIDEO 1 2 DIGITAL AUDIO INPUT AUDIO INPUT DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. VIDEO INPUT ANT INPUT INSTALLATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 16 Output Select To Select DVD Press [DVD] button. If DVD mode is correctly selected, DVD on the operation display window is lighted. Then, remote control button works as DVD function. Press the [DVD] button, then the mode of DVD-Video Player becomes to the DVD OPERATION mode. To Select VCR Press [VCR] button. If VCR mode is correctly selected, VCR on the operation display window is lighted. Then, remote control button works as VCR function.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 17 Clock Set ■ Set TV to CH 4( or 3). ■ Press [VCR] button on remote control to change into VCR mode and follow the procedures below. 1 Press [SETUP] button. Press [ENTER] button to select CLOCK SET. Select Time and Date Set with [ENTER] button in CLOCK SET screen.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 18 DVD Playback 1 2 3 4 √] button to power on. Press [√ Press [DVD] button of remote control to change into DVD mode. Press [OPEN/CLOSE] button to open the disc tray. Place a disc firmly on the disc tray, making its label look upward. Insert the disc and press [OPEN/CLOSE] button to close the tray. The disc tray is closed and after checking the discÕs condition, Playback or Stop function starts to operate. To playback it, press [PLAY/PAUSE] button.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 19 VCR Playback Press [VCR] button of remote control to change into VCR mode. Insert the desired tape. If you want to playback it, press [PLAY/PAUSE] button. When the operational status is flickering or poor, adjust it with [TRACKING +/Ð] button. To stop it, press [ ] button. For pause, press [PLAY/PAUSE] button in playback mode. If you press this button once more, it starts playback again.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 20 Memorizing TV Channels To Memorize Automatically Channels 1 Press [SETUP] button. 2 Select ÒAUTO CHANNEL SEARCHÓ. Press [ ] button to move into CHANNEL SET, and then select CHANNEL SET with [ENTER] button. Press [ENTER] button in CHANNEL SET window to select AUTO CHANNEL SEARCH. Select ÒDetect AutomaticallyÓ. Press [ENTER] button in AUTO CHANNEL SEARCH window to detect the channel automatically.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 21 Memorizing TV Channels To Delete Channels Manually ■ After memorizing automatically channels, when the same broadcasting is memorized in more than two channels, or you want to delete badly displayed channels, follow the procedures below. 1 2 3 Press [SETUP] button and select ÒCHANNEL SETÓ. Select ÒAdd/Remove ChannelsÓ. Select the desired channel and delete it. ADD/REMOVE CHANNELS Channel 02 is now REMOVED.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 22 Recording To Record With VCR 1 Press [√] button to power on. 2 3 4 5 6 7 Insert a recordable tape. ¥ ¥ Press [VCR] button of remote control to change into VCR mode. Power on TV and select Ch 3, or press [INPUT] button of TV set to select External Input mode. Insert a tape with recording tab. With [CHANNEL], [NUMBER] and [OUTPUT] buttons, select the desired broadcasting channel or external input unit to record.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 23 Recording To Record From DVD To Videotape during DVD playback 1 Press [DVD] button of remote control to change into DVD mode. Insert the desired DVD disc. When it is a DVD disc with copy protect function, you canÕt copy it. Insert a recordable tape. 2 3 Play the DVD disc and press [REC] button. DVD plays and VCR starts recording. To exit copy, press [ ] button.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 24 Timer Recordings TIMER RECORDINGS ■ ■ ■ ■ Power on TV. Make sure that current time is set correctly. Insert a recordable tape with recording tab. Prior to the setting, press [VCR] button to change to VCR mode. 1 2 Press [SETUP] button and select ÒTIMER RECORDINGSÓ. Move into ÒTIMER RECORDINGSÓ with [ ] and then, select the desired one with [ENTER] button. Select ÒMake a New ProgramÓ. Press [ENTER] button to select ÒMake a new ProgramÓ.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 25 Timer Recordings 6 Set proper ÒRECORDING SPEEDÓ. Select one of SP/SLP with [ ] or [ ] button. For more information on recording speed, see ÒUsing video cassetteÓ in the page 24. PROGRAM1 (ONE TIME) Channel Start Date Start Time End Time Tape Speed Move: Video: OUTPUT 7 Press [SETUP] button to complete the setting. ÒProgram # has been saved. For program recording, insert a cassette....Ó message is displayed.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 26 Timer Recordings Various TIMER RECORDINGS One Time: It is available of TIMER RECORDINGS at the desired specified time. Daily : Once you set TIMER RECORDINGS of the desired program telecasted at the same time day after day, it is available of daily recordings. It is available of TIMER RECORDINGS from Sunday to Saturday. Weekday : It is similar to Daily TIMER RECORDINGS, but this TIMER RECORDINGS is available from Monday to Friday.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 27 Watching and Recording Cable TV To Watch and Record Promptly Cable TV 1 Power on converter and then, set a channel to watch or to record. Power on DVD-video and then, set the channel of DVD-video to the converter-connected channel (one of CH03/04/EXTERNAL INPUT). Power on TV and then, set the video-connected channel (one of CH03/04/VCR). 2 Simultaneous Recording and Watching At this time, CH selected by the converter is displayed on TV screen.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 28 Using advanced features Play the tape automatically ■ This feature allows the VCR to automatically start playing when you insert a tape with the safety tab removed. 1 2 Press [SETUP] button and select ÒFUNCTIONSÓ. Move into ÒFUNCTIONSÓ with [ ] and then, select the desired one with [ENTER] button. Press [ENTER] to switch between ON and OFF.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 29 Using advanced features Searching a cassette tape for programs (indexing) ■ When you record a programs, the VCR places an index mark at the start of the recording. To search for an index mark: 1 2 FUNCTIONS Press [SETUP] button and select ÒFUNCTIONSÓ. Select ÒIndex SearchÓ. If you want to search through a certain number of index marks, press two number buttons to enter the number of marks you want to search.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 30 Using advanced features Display (O.S.D) 1 2 Press [DISPLAY] button to display the tape counter, clock and status mode on the TV screen. And, by one more pressing [DISPLAY] button before disappearing the OSD from the screen, only the tape counter will remain on the screen. Daylight-Saving Time 1 2 Press [SETUP] button and select ÒCLOCK SETÓ. Move into ÒAuto DSTÓ with [ ] . Press [ENTER] to switch between ON and OFF.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 31 Hi-Fi Stereo Playback (Hi-Fi Model only) Playing a tape in Hi-Fi high-quality ¥ ¥ ÒHi-FiÓ signal lights up in the top of a screen. Pressing [AUDIO] button changes menus one by one. Hi-Fi LINEAR MIX If there are some noises made in recording, please ÒLinearÓ to reduce them.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 32 Playing a desired scene To skip scenes in a disc DVD, VCD, VCD2.0, CD, MP3 To move to next chapter (or track), press [NEXT √√❚ ] button. The current chapter (or track) moves to the next chapter (or track). œœ PREV] button. Press [❚œ The current scene moves to the previous chapter (or track) or first scene of current chapter (or track). Directly moving to a desired title DVD ■ Some movie discs may contain multiple titles.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 33 Playing a desired scene Playing a programmed order DVD, VCD, CD PROGRAM While STOP or Playback, press [PROGRAM] button. 1 While the right figure is appearing, please input desired Title and Chapter number with NUMBER buttons. Press [ENTER] to memorize. Then input next number. To cancel, move the cursor to the desired parts and press [CLEAR] button. TITLE 00 TITLE 01 - 02 - 03 - 04 - 05 - - CHAP. 000 CHAP. ----------- SEL.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 34 Playing a desired scene Repeating a defined period from A to B DVD, VCD, CD ■ You may repeat a defined period from A to B. A MP3 disc may not be repeated from A to B. 1 At the point where you want to start the repeat playback, press [A-B] button. 2 At the point where you want to end the repeat playback, press [A-B] button again. A- The right figure appears and repeat playback start position (A) is set.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 35 Playing a desired scene Searching VCD, CD and MP3 with a track number or time In case of PBC OFF, the screen like the right figure appears. It shows current and total track numbers. Please enter the new track number to be searched using the [NUMBER] button. ➟ current track number T 001/013 ➟ 1 If you want to search with a time, press [SEARCH] button one time.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 36 Confirming the current PLAY mode on screen Confirming the current DVD disc mode DVD While in playing, press [DISPLAY] button. It shows the current disc mode. If you want to change the mode, select the item with up/down cursor and enter the new settings with [number], [<] or [>] button. In completing entering, press [ENTER] button. To exit from Display mode, press [DISPLAY] button again.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 37 Confirming the current PLAY mode on screen Confirming the current VCD disc mode VCD While in playing, press [DISPLAY] button. It shows the current disc mode. If you want to change the mode, select the item with up/down cursor and enter the new settings with [number], [<] or [>] button. In completing entering, press [ENTER] button. To exit from Display mode, press [DISPLAY] button again.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 38 AUDIO language, SUBTITLE language and 3D AUDIO Selecting an audio language DVD ■ The user may select an audio language and subtitle language if a disc includes Multi-language. Keep pressing [AUDIO] button till the userÕs preferred language appears in playback mode. If DVD disc includes audio information, every time the user presses [AUDIO] button, English (ENG), French (FRE), Spanish (SPA) and others appear one by one.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 39 ZOOM and Multi Angle Using a zoom function DVD, VCD ■ The user can enlarge the current screen about 2 or 4 times. Keep pressing [ZOOM] button till the preferred zoom appears. For the case of SVCD and VCD, only 2 times Zoom is available. Every time the user presses [ZOOM] button, a zoom magnification changes 2 times (X2) ➝ 4 times (X4) ➝ OFF ➝ 2 times (X2) ➝ ... one by one.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 40 About MP3, JPEG discs Playing a disc containing MP3, JPEG files MP3, JPEG This unit will play MP3, JPEG files recorded on CD-R and CD-RW discs. 1 Turn on your television and select the channel assigned to this DVD player. Press the DVD open [OPEN/CLOSE] button, the disc tray opens. Put a disc containing MP3, JPEG files on the disc tray with the label side up. Press the DVD open [OPEN/CLOSE] button, the disc tray closes.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 41 About MP3, JPEG discs 6 Select the file to listen to (or view). Move the cursor to desired file which you want to listen to (or view) by pressing [ ] button and press [ENTER] button to confirm. The selected file will be playback. DISC: \DIR--01 .. FILEOPEN--01 FILEOPEN--02 FILEOPEN--03 FILTER REPEAT 00:00 / 00:00 … † œ √ MP3 ONLY TRACK ❑ ENTER MENU * To disappear the directory screen, press [MENU] button in playback or stop mode.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 42 Displaying menus in a disc To display menus in a disc DVD, VCD2.0 ■ If a disc includes menus, the user may use them. 1 Press [TITLE/PBC] or [MENU] button. ¥ It shows menus in the disc. Also they are different according to discs. (ÒReturnÓ will appear on the OSD with VCD2.0.) ¥ If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button. * CD and VCD1.1 do not support the function.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 43 LANGUAGE Setup The user can set the language of menus in a disc, audio and subtitle. 1 While DISC STOP or Resume STOP, press [SETUP] button. LANGUAGE VIDEO OSD LANGUAGE AUDIO SUBTITLE DISC MENU AUDIO OTHERS ENGLISH ENGLISH ENGLISH ENGLISH MOVE :œ √†… SELECT:ENTER EXIT:SETUP 3 Selecting an AUDIO language. 4 Selecting a SUBTITLE language. Please select a language to be displayed on DVD screen.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 44 VIDEO Setup A user can set up a connected TV condition and screen. 1 While DISC STOP or Resume STOP, press [SETUP] button. LANGUAGE VIDEO TV ASPECT VIDEO OUT SCAN MODE AUDIO OTHERS 4:3 LB COMPONENT INTERLACED MOVE :œ √†… SELECT:ENTER EXIT:SETUP 2 Selecting TV ASPECT. 3 Selecting VIDEO OUT. Every time the user presses [ENTER] button, TV ASPECT changes 4:3 LB ➝ 16:9 WIDE ➝ 4:3 PS ➝ ... one by one.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 45 AUDIO Setup A user may select audio menu according to a userÕs speaker set. 1 While DISC STOP or Resume STOP, press [SETUP] button. LANGUAGE VIDEO DIGITAL OUT DYNAMIC RANGE AUDIO OTHERS BITSTREAM OFF MOVE :œ √†… SELECT:ENTER EXIT:SETUP 2 Selecting DIGITAL OUT. 3 Select a Dynamic Range Every time the user presses [ENTER] button, DIGITAL OUT changes BITSTREAM ➝ LPCM ➝ BITSTREAM ➝ ... one by one.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘ ` 46 Others Setup 1 While DISC STOP or Resume STOP, press [SETUP] button. LANGUAGE VIDEO OSD SCREEN SAVER DEFAULTS PARENTAL AUDIO OTHERS ON ON RESET 8 ADULT MOVE :œ √†… SELECT:ENTER EXIT:SETUP ¥ If password is wrong, ÒWRONG PASSWORDÓ appears instead of ÒCHANGE PASSWORDÓ. 2 3 Selecting OSD. 4 Changing DEFAULTS. 5 Selecting PARENTAL. ¥ Initial Password is Ò3308Ó. When you forget new password, you may input this number.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:21 PM ˘ ` 47 About DVD Playable Disc ¥ DVD, Video CD (Version 1.1, 2.0), S-VCD and Audio CD Disc type DVD Playable Possible Restriction Region number 1 or Region number All Video CD CD Possible Possible Version 1.0/1.1/2.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:21 PM ˘ ` 48 About DVD CHAPTER It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of which a track is called as a chapter. A certain scene of a screen can be quickly searched with the chapter number. TITLE It means the information recorded in a DVD. A DVD can be divided into may titles. TRACK It means the information recorded in a video CD and audio CD.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:21 PM ˘ ` 49 Basic information about VCR and Videotape Terms related with VCR AFT Automatic fine tuning, a circuit that automatically adjusts TV reception to optimum condition. CABLE Cable television. Index Search A feature of this VCR that automatically records an index each time recording begins. It helps you locate a particular segment of the tape quickly and easily.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:21 PM ˘ ` 50 Before doubting about troubles (DVD) Symptom Checks ¥ The player does not play. ➤ If a DVD is from overseas, it may not be played. Please check a DVDÕs region code whether it has the relative region code 1 or All. ➤ Please check whether a DVD is inserted in a right direction. ➤ If it is a CD-ROM for PC or DVD-ROM, it does not work. ¥ No sound comes through.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:21 PM ˘ ` 51 Before doubting about troubles (VCR) Symptom Checks ➤ Please check whether a power plug is inserted in an electric outlet. ¥ It does not work even in ÒPower OnÓ. ➤ Please check whether a videotape is inserted in. ➤ Try to insert a plug again. ¥ A videotape is not inputted in. ➤ Please check whether a power plug is inserted in an electric outlet. ➤ Please check whether a videotape is in.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:21 PM ˘ ` 52 Before doubting about troubles (VCR) Symptom Checks ¥ Recording a TV program is impossible. ➤ Please check whether a channel is fixed on video. If not, you have to turn it into ÒTVÓ by pressing [OUTPUT] button. ➤ Please check whether the timer recording info is right. ➤ Are RF cables inputted antenna connection terminal correctly? ➤ Does a CH number selected in display section appear? ➤ Please check a tab on a tape whether it is broken or not.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:21 PM ˘ ` 53 Specifications Power AC 120V, 60Hz Consumed electricity 24W (supplementary 4W) Weight 4.5kg Dimension (WxHxD) 435mm x 93mm x 255mm Operative temperature +5¡C~35¡C Installation condition Horizontal / Relative humidity under 80% Received channels VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125 Signal type NTSC COLOR Antenna Input/output U/V-mixed: 75½ unbalanced VIDEO input 1.0 Vp-p unbalanced, RCA JACK AUDIO input -8.