HELP LINE ; 0870 100 2525 With queries, please quote the page number, reference number and model number.
Safety Instructions INTRODUCTION Please keep the DVD Recorder+VCR’s guarantee sheet and receipt in a safe place. Precautions • Read this booklet carefully. • Make sure the rating of your household electricity supply matches that shown on the back of your DVD Recorder+VCR. • Read this page and chapter ‘Setting up your DVD Recorder+VCR’ to help you set up and adjust your product correctly. • Do not put the DVD Recorder+VCR in a hot or humid place. • Do not open the DVD Recorder+VCR.
Important Safeguards RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage‘ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Important Safeguards 15 OVERLOADING Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock. 16 OBJECT AND LIQUID ENTRY Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or ‘short-out’ parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit. 17 BURDEN Do not place a heavy object on or step on the product.
Overview Overview Playback only What is a DVD? DVD Video (Digital Versatile Disc) DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc. DVD-R (DVD-Recordable): These discs can only be played back if the recording was made in ‘Video mode‘ and the recording was finalized.
Overview Copyright Notice • Audio and video recordings you make using the DVD Recorder+VCR are for your personal use only. You may not sell, lend, or rent them to other people. • This product incorporates copyright protection technology that is protected by method claims of certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Identification of Controls Identification of Controls Front Panel Display ! @ ^ *) 2 & (1 ! STANDBY/ON Turns the DVD Recorder+VCR on and off. Lock/Unlock the front panel and Remote control by pressing and holding it over 5 seconds. @ Cassette Compartment (VCR deck) Insert a video cassette here. # EJECT (VCR) Ejects the tape in the VCR deck. $ Disc Tray (DVD deck) Insert a disc here. % OPEN/CLOSE (DVD) Opens or closes the disc tray. ^ REW DVD: Skips to previous chapter.
Identification of Controls Identification of Controls INTRODUCTION Remote Control Turns the DVD Recorder+VCR on and off. - Opens and closes the disc tray in DVD mode. - Ejects the tape in the VCR deck in VCR mode. Selects DVD mode. Selects VCR mode. Starts recording. Press repeatedly to set the recording time. For more details, Refer to One Touch Record (OTR) on page 44. Copies from DVD to VCR (or from VCR to DVD). Selects Recording mode: - DVD : HQ (1hr), SP (2hrs), EP (4hrs) or SLP (6hrs).
Identification of Controls Connections ! @# $ ^ • Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input. • Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. • Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protection system. ( * ! AC Power Cord Plug into a power outlet.
Connections Connections Connecting a TV Connecting an Amplifier/Receiver Choose one of the following TV connections, depending on the capabilities of your equipment. Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic All video signals are available from all video outputs. That means that whichever TV connection you use, it will work with all input sources, including VHS out of the Component/Progressive Video Output.
Connections Connecting Optional Equipment Initial Installation Initial Installation To receive audio/video signals from other equipment, connect the AVF jacks on the DVD Recorder+VCR to the audio/video out jacks on your external component, using optional audio/video cables. After successfully connecting your DVD Recorder+VCR to your TV and other devices, this chapter will show you how to complete the initial installation. Jack Panel of Accessory Component (VCR, Camcorder, etc.
Initial Installation 6 Select the desired disc playback subtitle language using […/†]. Press [ENTER] to confirm. Setup Menu Overview Installation Please select disc subtitle language: Default English Spanish French Czech Danish German Instructions Enter-Confirm Setup-Exit Move …† 7 The DVD Recorder+VCR detects channels automatically and stores them in memory. Initial Setup Installation Searching for available TV stations: Menu Navigation 1 2 3 4 5 Press [SETUP]. The Setup menu appears.
Initial Setup 9 10 Use […/†] to select ‘Auto Search‘. Search the real channel number by pressing [œ/√]. Auto Set Manual Setup Standard Reception Auto Search Fine Tune Decoder Store Program Name Instructions PAL-BG Aerial CH02 Off PR01 P-01 Enter-Confirm Setup-Exit Move …† 11 Select ‘Fine Tune’. You can adjust the fine tuning. Manual Setup PAL-BG Aerial CH02 The DVD Recorder+VCR has a frequency synthesized tuner capable of receiving up to 119 channels.
Initial Setup Adjust Channels 1 Follow steps 1-2 as shown under ‘Manual Set’. 2 Use […/†] to select ‘Adjust Channels‘. 3 Press [ENTER]. The Adjust Channels menu appears. 4 Use […/†] to select the PR number you want to adjust. Then press VCR Record Quality Manual Set Auto Set Set Clock Adjust Channels Enter-Confirm Setup-Exit Move …† Adjust Channels After tuning TV stations into your DVD Recorder +VCR, you may wish to put a name into any channel you want to.
Initial Setup PREFERENCES / Video Settings Menu/Subtitle/Audio Language Select your preferred language for Disc Menus, Subtitles, and Audio soundtracks. Follow the same procedure as the OSD Language. Default : The disc’s default language is selected. Initial Setup Language OSD Language Menu Language Subtitle Language Audio Language Instructions English Select Menu Default Language Default Default Default … 1 2 3 3 Press [SETUP]. Preferences Use [œ/√] to select ‘Preferences‘.
Initial Setup Initial Setup PREFERENCES / Audio Settings PREFERENCES / Parental Controls Follow the same procedure as ‘Video’ Settings to select ‘Audio’ Settings. Set Parental Level Preferences Video Audio Parental Controls Auto Settings VCR Digital Output 1 Use […/†] to select ‘Digital Output‘ while the ‘Audio’ submenu is displayed. Enter-Confirm Setup-Exit Move …† Press [ENTER] or [√] to go to the second level. 1 2 3 Press [SETUP]. Use [œ/√] to select ‘Preferences‘.
Initial Setup 8 Press [ENTER] to confirm your rating selection, then press [SETUP] to exit the menu. Initial Setup PREFERENCES / Auto Settings Parental Control Set Parental Level ADULT Change Password Set Parental Country Code 1 2 While ‘Preferences‘ is selected, press [†] to select ‘Auto Settings‘. Press [ENTER] to display the submenu.
Initial Setup On-Screen Display Overview The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded disc or tape. To access the On-Screen Display (or OSD), press [DISPLAY]. VCR This feature enables you to search for Index marks or specific times on your VHS tapes. Preferences Use […/†] to select ‘VCR‘. Video Audio Parental Controls Auto Settings VCR Press [ENTER] to display the submenu.
On-Screen Display Overview On-Screen Display Overview OSD Menu Options for DVD During DVD playback, press [DISPLAY] to show information about the current disc. While the disc information is displayed, press [DISPLAY] again to show the disc remaining time. Subtitle Shows the current subtitle language, and changes the setting. 1 2 3 4 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. Use […†] to select the ‘Subtitle‘ icon on the on-screen display.
DVD Playback Playing a DVD 1 Press [DVD] to set the remote control to operate the DVD deck. Changing the Audio Language Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Press [AUDIO] and then press [AUDIO] repeatedly during playback to hear a different audio language or audio track. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. Subtitles 2 Press [OPEN/CLOSE] to open the disc tray.
DVD Playback Search 1 Press [SEARCH] to display the Search menu. 2 Use [œ √] to move to Title (T) or Chapter (C) and use […†] to set the title or chapter number. VCR Playback Before You Begin T/ 3 œ … C 1 √ † Press the VCR button to set the remote control to operate the VCR deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.
VCR Playback Other Disc Playback Special Playback Features Audio CD/MP3 PLAYBACK Notes on special playback features The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs. Horizontal lines (noise bars) will appear on the TV screen. This is normal. The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc. During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode.
Other Disc Playback Basic Recording Recording from TV 3 Select the thumbnail you want to display using […†œ √] and press [ENTER]. Follow the instructions below to record a TV program. 1 Turn on the DVD Recorder+VCR and load a recordable disc or tape. Make sure your TV input is set to view the DVD Recorder+VCR. 2 Set the desired Recording mode by pressing [REC MODE] repeatedly.
Basic Recording One Touch Record (OTR) Basic Recording One Touch Copy - DVD to VHS One Touch Recording allows you add recording time in fixed increments at the touch of a button. • If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. • Copy to VCR does not work in Progressive Scan Mode. 1 Follow steps 1-4 under Recording from TV. 2 Press [REC (●)] repeatedly to set the length of the recording.
Basic Recording Timer Recording One Touch Copy - VHS to DVD Timer Recording using Manual Set Record Screen You can copy the contents of a VHS tape to a DVD+R or DVD+RW using the [COPY] button. This allows you to archive your old VHS tapes to DVD. The Timer Recording function allows you to record up to 8 programs within a period of one month. If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not permitted to copy Macrovision encoded tapes.
Timer Recording Timer Recording Timer Recording using VideoPlus system Canceling a Timer Recording Thanks to this programming system, you no longer need to tediously enter the date, programme number, start and end time. All the information needed by the DVD recorder for programming is contained in the VideoPlus programming number. This VideoPlus number is found in most TV listings. You can clear a Timer Recording any time before the recording actually starts.
Recording from an External Input Recording from an External Input Recording from External Components What is DV? You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder+VCR’s external inputs. Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVD Recorder+VCR using a single DV cable for input and output of audio, video, data and control signals. The i.LINK interface is also known as IEEE 1394-1995. ‘i.LINK’ and the ‘i.
Editing Editing DISC Initialize • If you load a blank DVD+R(+RW) disc, it will be initialized (formatted to enable recording). • Do not start recording until disc initialization is complete. • If you load a DVD+RW that has already been used you can record a program immediately. Finalize (Make Compatible) Finalizing a DVD+R ‘locks’ its recordings in place so the disc can be played on most standard DVD players or computers equipped with DVD-ROM drives.
Editing Title Menu Change Disc Name You can manage the titles on your DVD+R/RW discs using the Title menu. You can rename your disc to any name you choose. The default disc name is ‘MY DVD‘. 1 2 3 4 5 6 Change Disc Name Press [√] to display the Disc Information Menu. Press [Enter] to change the disc name. Press [√] and select ‘Change Disc Name‘. Press [ENTER] as shown on the screen. Instructions Enter-Confirm Use [œ √…†] to select and press [ENTER] to enter the name of the disc.
Editing Editing Change Name To change the name of a title: 1 2 3 Follow steps 1 to 3 under ‘Play Title‘. Select ‘Change Name’ using [œ √] . Editing Change Name … Press [ENTER] to change the title name. Press [Enter] to change the title name. When you insert a DVD+R or DVD+RW disc already recorded by your DVD Recorder+VCR, you can edit the titles and chapters in a variety of ways. To edit a recorded title, select the title on the disc menu and press [EDIT].
Editing Troubleshooting Check the following guide for the possible cause of a problem before contacting customer support. Hide Chapters This feature allows you to hide or unhide a chapter. After hiding a chapter, the chapter is not deleted but only hidden. If a chapter is hidden then it shows ‘Unhide Chapter‘ and vice versa. Symptom DVD Edit Title 1 of 2 Chapter 1 of 11 Edit Chapters Hide Chapter Change Index Picture Split Title No power. The power cord is disconnected. No picture.
Troubleshooting Symptom Cannot record or did not record successfully. Timer Recording not possible. Stereo Audio Record and/or Playback not present. Remote control does not work properly. Cause Solution Discs recorded with copy-once material cannot be played on other players. The remaining blank space on the disc is insufficient. The source you are trying to record is copy-protected. When setting the recording channel, the channel is tuned on your TV’s tuner.
Technical Specifications Outputs Video output (DVD/VCR) Video output (DVD) Audio output (DVD/VCR) Audio output (DVD) S-Video output (Y) Video output terminal, 1.0 Vp-p, unbalanced RGB output (75Ω in load, R : 0.7Vp-p, G : 0.7Vp-p, B : 0.7Vp-p) Audio output terminal (2 kinds), -5.8dBm (VCR), 2Vrms (DVD) Analog audio output : 2.0Vrms, Digital audio output : coaxial 1.0Vp-p, 75Ω unbalanced, Mini DIN 4-pin x 1, C : 0.286Vp-p, 75Ω Design and specifications are subject to change without notice.
SURNAME The information provided will be held on computer by the DAEWOO Registration Department of Domestic & General Insurance Co. Limited for the provision of warranty insurance or product related purposes. The information will not be disclosed to third parties, should you prefer not to receive product related details writes to Domestic & General Insurance Co. DAE REG / 295 Limited, on the address overleaf. TODAY DATE OF PURCHASE TEAR OFF HERE AND RETURN MODEL No.
DAEWOO GUARANTEE CONDITIONS This product is guaranteed for 12 months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge during this period by the dealer from whom you purchased the unit. The guarantee is subject to the following provisions. The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items such as batteries, drive belts or bulbs.