S/M No. : DW50100001 Service Manual Washing Machine Model: DW-5010 ✔ Caution : In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). DAEWOO ELECTRONICS CORP. http : //svc.dwe.co.kr Aug.
AUTO WASHER WASHER AUTO AUTO WASHER WASHER AUTO AUTO WASHER WASHER AUTO AUTO WASHER WASHER AUTO AUTO WASHER AUTO WASHER WASHER AUTO AUTO WASHER WASHER AUTO AUTO WASHER WASHER AUTO AUTO WASHER WASHER AUTO AUTO WASHER AUTO WASHER WASHER AUTO AUTO WASHER WASHER AUTO AUTO WASHER WASHER AUTO AUTO WASHER WASHER AUTO AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO
1. SPECIFICATIONS NO. ITEM SPECIFICATIONS VOLTAGE 1 2 FREQUENCY 60Hz POWER NON PUMP 400W CONSUMPTION PUMP 3 DEMENSION 4 CAPACITY 5 AC 127V POWER SOURCE 440 X 802 X 941 (W X D X H) WASH 5.0Kg SPIN 4.0Kg MACHINE NON PUMP NET : 22.5Kg, PACKED : 25.5Kg WEIGHT PUMP NET : 23.5Kg, PACKED : 26.
2. CAUTIONS ON THE OPERATION 2-1. INSTALLATION - Install the washer in the place easy of access to water, electrical power and drainage. - Install the washer on a firm and flat floor. - Be sure that the washing machine must be grounded with the external g rounding wire(option) or with the power cord and electric outlet of the house. - Avoid installing the machine where it can be exposed to rain or directray of the sun, that may cause trouble or discoloration.
2-3. CAUTION ON USE - Do not use water which contains rust. - Never put your hands into the tub during wash and rinse process. - This unit is made of poly-propylene, use water below 50. - The opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. - Put the wet c lothes into the spindryer drum, being sure that they must be well balanced. - Place the safety cover horizontally on the top.
3. PRINCIPLES OF OPERATION AND EXPLANATION OF FUNCTIONS TIMER WASH - Function The main switch(T1) remains ON during the washing time set by turning the timer knob. At the same time, the internal switch(T2) provides Power to wash motor alternately at assigned intervals.
TIMER SPIN - Function The Spin Timer is the switch providing power to the spin motor(Drain Pump motor) during the set spin dry time, and is a spring-type time switch comes on upon turning and those contact point comes off after the set time.
Door Switch When the door spin o is opened during spin drying the lever of the door switch which sites a top the door spin o falls off the contact, and cuts off the power going into the spin motor. Brake System When the door spin is opened, the link brake and brake wire is loosened. And then the brake band touches the drum coupling assembly and stops the spin dryer as it is pulled by the spring in the brake fix plate assembly.
4. TROUBLE SHOOTING GUIDE NOTES Pull out the power plug prior repair and make sure that the Washing machine has been properly grounded. Concerning Wash PROBLEM CHECK POINT CAUSE Is the Power properly connected? NO SOLUTION Reconnect the Power Cord. YES Is there a whirring sound from the Wash Motor when turned on? YES PULSATOR DOSE NOT ROTATE. Is the Condenser properly connected? Motor does not start due to opening the Condenser circuit. Reconnect the Condenser.
PROBLEM PULSATOR ROTATE ONLY IN ONE DIRECTION. CHECK POINT Is the wiring of Condenser properly connected? YES Is the wiring of wash timer properly connected? CAUSE NO NO YES THERE IS EXCESSIVE NOISE DURING WASHING. Are there strange noise from Tub when the Pulsator rotates? YES SOLUTION Improper wiring. Reconnect. Improper wiring. Reconnect the Wash Timer Defective Wash timer. Replace Wash Timer. Impurtities between Pulsator and Tub. Remove impurities after disassembling Pulsator.
PROBLEM CHECK POINT CAUSE SOLUTION NO Spin Dryer does not balanced due to wash load. Reload the clothes so they are well balanced. Are clothes or the Safely YES Cover stuck out of the Spin Basket? Tub is in contact with the object stuck out. Reload the clothes and press down the Safety Cover into Spin Basket. Improper structural assembly Tighten the Bolt in Drum Coupling Assembly Spin Dryer unbalance Re-assemble Spin Dryer. The Waterseal or the Oilless metal in the Bellows Assembly worn out.
5. HOW TO DISASSEMBLE 5-1. REPLACING WASH TIMER AND SPIN TIMER 1. Remove 5 screws on panel. 2. Remove 4~5 screws on bracket panel. 3. Remove control lever. 4. Remove wash and spin timer. 5-1. REPLACING WASH TIMER AND SPIN TIMER 1. Remove 2 screws on the cover B 2. Seperate link brake from the brake wire assembly.
12 3. Remove nut and bolt on spin basket shaft and remove spin basket. 4. Remove a belt connecting motor pulley and pulsator pulley. 5. Remove 3 screws fixing the drain pump. (pump model) 6. Remove cap screw(2EA) and 5 screws on flange of the tub. And lift up the tub assembly. 7. Remove 3 screws and wash motor. 8. Remove 3 screws and spin motor.
6.
TUB ASS’Y 14 PARTS DIAGRAM
BASE ASS’Y PARTS DIAGRAM 15
7. PART LIST ✔ Caution : In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). PANEL ASS’Y NO. PART NAME PART CODE SPEC. Q'TY REMARKS 1 KNOB 3613403800 ABS 3.00 2 PANEL 3614280000 HIPS 1.00 3 SCREW TAPPING 7122401411 T2S TRS 4X14 MFZN 2.00 4 BRACKET PANEL 3610607500 HIPS 1.
TUB ASS’Y NO. PART NAME PART CODE SPEC. Q'TY REMARKS 1 SPECIAL SCREW 3616002901 SUS 304, 6X19.5(NON SILOCK) 1.00 2 PULSATOR AS 3619705000 PP 1.00 3 DRAIN STRAINER 3619606400 PP 1.00 4 FILTER OVERFLOW 3611903600 PP 1.00 5 RING BASKET 3614602000 PP 1.00 6 SCREW TAPPING 7122401211 T2S TRS 4X12 MFZN 4.00 7 BASKET SPIN AS 3619102510 DWM-600FA 1.00 8 BELLOWS AS 3616401010 5510PA, 3620DE 1.00 9 FIXTURE 3612004400 PP 1.
BASE ASS’Y NO. 18 PART NAME PART CODE SPEC. Q'TY REMARKS 1 BOLT HEX(P) 7342602011 6B-2 6X20 POINTING MFZN 2.00 2 NUT HEX 7392600011 6N-2-6 MFZN 2.00 3 COUPLING DRUM 3619400300 AL 1.00 4 BOLT HEX 7341500811 6B-1 5X8 MFZN 3.00 OPTION 5 SPRING BRAKE LEVER 3615109000 SWC D1.0 ZN8-C 1.00 OPTION 6 PLATE BRAKE AS 3414517400 ASSY, 4.0KG 1.00 OPTION 7 ASSY BRAKE WIRE 3619201702 SUS WIRE+PE L260 1.00 OPTION 8 BELT V 3616500800 A36.6 1.00 9 NUT HEX 7392800011 M8X1.
8.
DAEWOO ELECTRONICS CORP. 686, AHYEON-DONG MAPO-GU SEOUL, KOREA C.P.O. BOX 8003 SEOUL, KOREA TELEX: DWELEC K28177-8 CABLE: “DAEWOOELEC” S/M No. : DW50100001 PRINTED DATE: Aug.