Service manual

10
• HOW TO ATTACH CABINET DRAIN
The air conditioner employs a proper drain method whereby the condensed water (moisture removed from the air) is
drained to the outside.
In very humid weather, excessive condensate water removed from the air may cause some water to collect. To remove
this excess water you can install the cabinet drain as detailed below.
1. Take the cabinet drain which is located in the upper styrofoam pad.
2. Remove the hole rubber from the base pan bottom hole.
3. Install the cabinet drain to the left corner of the cabinet with 3 screws.
4. Connect the drain hose to the outlet located at the bottom of the cabinet drain.
You can purchase the drain hose or tubing locally to satisfy your particular needs.
(Drain hose is not supplied)
CABINET
SCREW
CABINET
DRAIN
DRAIN HOSE
CAUTION
1. Remove “the Grille Front” from the unit.
2. Find “the Cabinet Drain” which is attached on rear side of “the Grille Front”.
- If you don’t remove it. the unit cannot be operated normally.
3. Assemble “the Cabinet Drain” according to the instruction of page 5
- “How to attach cabinet drain”
Inside of Grille Front
Remove the Cabinet Drain