Service manual

8
• MOTOR
The motor is used to rotate the indoor and outdoor fan so that the room air can be recirculated.
• FAN MOTOR
– BLOWER FAN : The Blower draws hot air from the room through the Evaporator and then discharges it back into the
cool air. It circulates the room air.
– PROPELLER FAN: The Propeller draws outdoor air through louvering and cools Condenser, and then blows the hot air out.
* Heating condition is in opposition.
• CAPACITOR
The Capacitor enlarges the difference of phase between main coil so that the Compressor and Fan Motor starts well.
• ACCUMULATOR
The Accumulator blocks the unflow of liquid refrigerant and impurities into the Compressor.
CAUTION
In order to After Service convenience that the motor is common parts with Cooling only model, (This part is not
use of medium speed function so that the lead wire’s receptacle is taping)
Because of the motor supplies of having a lead wire’s receptacle when Heat Pump model’s After Service that it
is necessary to taping of lead-wire.