Service manual

8. FUNCTION OF THE CONVENIENT SERVICE
59
FUNCTION OF THE CONVENIENT SERVICE
■ The test mode of the operation
You can check the PCB AS and the operation of the washing machine simply.
• The method to test and operate
1 Press the Power button.
2 Press the Option button 3 times while press the Temp button.
At this time, the version is displayed on the Custom LED
3 Whenever the Time Delay button is pressed, the washing machine is operated as following.
L_C (Lock Switch Close) → run/OO (The number of running times)
→ E5/OO → E6/OO → E7/OO → E8/OO (The number of the error occurrence)
→ H (Hot Valve) → C (Cold Valve) → P (Pre-Wash Valve)
→ bb (Bubble) → dr (Drain Pump)
→ C:H or C:-- (Cold & Hot Option)
→ nPC or PC or etc. (PCB Option)→ L_O (Lock Switch Open)
→ L_C →
...
(repetition)
■ The check mode of the water level frequency
You can check the water level frequency of the current state and the frequency by the variation of the water
level.
• The method to test and operate
1 Press the Power button.
2 Press the Time Delay button 3 times while press the Temp button and the Spin button.
3 The water level frequency of the current state displays on “18:88 LED”.
ex) 5 6 2 = 25.62kHz
: It display three number except the first number of 25.62kHz
4 Whenever the Temp button is pressed, the washing machine is operated as following.
Cold Valve Off (Initial state)
→ Cold Valve On
→ Hot Valve On
→ Pre-Wash Valve On
→ Bubble Pump On
→ Drain Pump On
→ ... (repetition)