Instruction manual

17
* HAND WASH
Put the laundry in the drum.
Then close the door.
• In the detergent compartment, put the powder into the main wash section.
Softener should be poured into the middle section of the compartment and be
below the ‘MAX’ level.
• Put detergent into the pre wash compartment only if you want to add prewash.
• When you want to use bleach, put it into the main wash compartment with
detergent.
Press the Power button.
•
The LED shows only ‘---’ and all Program Lights turn on.
Select the ‘Hand Wash’ programme using the programme selection dial.
• Water temperature ‘Cold’, spin ‘400’ rpm and rinse ‘3’ times are selected
automatically.
• If you want to change the water temperature, spin velocity or add wash options
(Rinse+, Crease Care), press each button.
Press Start/Hold button.
• The washing machine will start operating by locking the door and supplying water.
1
2
3
4
Note
• If you want to change the setting during operation, press the Start/Hold button to hold the operation
and press the button you want.
• Only ‘Cold’ and ‘30’ ˚C washing temperatures are available with the 'Hand Wash' programme.
• 1000rpm and 1400rpm of spin velocity is NOT selectable with this programme.
• Only ‘Rinse+’ and ‘Crease Care’ wash options may be chosen with this programme.
• Use Hand Wash programme for the laundry that is marked ‘Hand wash’ in the care label.
Downloaded From WashingMachine-Manual.com Manuals