S/M No. : Service Manual Washing Machine Model: DWD-FT1011/FT1012/FT1013/FT1211/FT1212/FT1213 DWD-FT1021/FT1022/FT1023/FT1221/FT1222/FT1223 DWD-FT1031/FT1032/FT1033/FT1231/FT1232/FT1233 DWD-FT1041/FT1042/FT1043/FT1241/FT1242/FT1243 DWD-FT1051/FT1052/FT1053/FT1251/FT1252/FT1253 DWD-FT1061/FT1062/FT1063/FT1261/FT1262/FT1263 DWD-FT1071/FT1072/FT1073/FT1271/FT1272/FT1273 ✔ Caution : In this Manual, some parts can be changed for improving, their performance without notice in the parts list.
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WAS
1.
■ DWD-FT1X3X SERIES HOT (OPTION) COLD INLET HOSE DETERGENT CASE POWER CORD CONTROL PANEL DOOR HOSE DRAIN LOWER COVER ADJUSTABLE LEG DWD-FT1011/FT1012/FT1013/FT1211/FT1212/FT1213 DWD-FT1021/FT1022/FT1023/FT1221/FT1222/FT1223 DWD-FT1031/FT1032/FT1033/FT1231/FT1232/FT1233 MODEL POWER SOURCE 220-240V, 50Hz DiMENSION (WXDXH) 595mm x 540mm x 850mm WEIGHT 50Kg(NET) / 54Kg(GROSS) WATER CONSUMPTION 47~59ℓ POWER CONSUMPTION 2200W MAXIMUM MASS WASH 6 / 6.5 / 7 kg OF TEXTILE SPIN 6 / 6.
■ DWD-FT1X4X SERIES HOT (OPTION) COLD INLET HOSE DETERGENT CASE POWER CORD CONTROL PANEL DOOR HOSE DRAIN LOWER COVER MODEL ADJUSTABLE LEG DWD-FT1041/1042/1043/1241/1242/1243 POWER SOURCE 220-240V, 50/60Hz DiMENSION (WXDXH) 595mm x 540mm x 850mm WEIGHT 50Kg(NET) / 54Kg(GROSS) WATER CONSUMPTION 47~59ℓ POWER CONSUMPTION 2200W MAXIMUM MASS WASH 6 / 6.5 / 7 kg OF TEXTILE SPIN 6 / 6.5 / 7 kg WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE) OPERATING WATER PRESSURE 0.
■ DWD-FT1X5X SERIES HOT (OPTION) COLD POWER CORD CONTROL PANEL DOOR HOSE DRAIN ADJUSTABLE LEG LOWER COVER MODEL DWD-FT1051/1052/1053/1251/1252/1253 POWER SOURCE 220-240V, 50/60Hz DiMENSION (WXDXH) 595mm x 540mm x 850mm WEIGHT 50Kg(NET) / 54Kg(GROSS) WATER CONSUMPTION 47~59ℓ POWER CONSUMPTION 2200W MAXIMUM MASS WASH 6 / 6.5 / 7 kg OF TEXTILE SPIN 6 / 6.5 / 7 kg WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE) OPERATING WATER PRESSURE 0.3 ~ 8kgf/cm2 (29.
■ DWD-FT1X6X SERIES HOT (OPTION) COLD INLET HOSE DETERGENT CASE POWER CORD CONTROL PANEL DOOR HOSE DRAIN ADJUSTABLE LEG LOWER COVER MODEL DWD-FT1061/1062/1063/1261/1262/1263 POWER SOURCE 220-240V, 50/60Hz DiMENSION (WXDXH) 595mm x 540mm x 850mm WEIGHT 50Kg(NET) / 54Kg(GROSS) WATER CONSUMPTION 47~59ℓ POWER CONSUMPTION 2200W MAXIMUM MASS WASH 6 / 6.5 / 7 kg OF TEXTILE SPIN 6 / 6.5 / 7 kg WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE) OPERATING WATER PRESSURE 0.
■ DWD-FT1X7X SERIES HOT (OPTION) COLD INLET HOSE DETERGENT CASE POWER CORD CONTROL PANEL DOOR HOSE DRAIN ADJUSTABLE LEG LOWER COVER MODEL DWD-FT1071/1072/1073/1271/1272/1273 POWER SOURCE 220-240V, 50/60Hz DiMENSION (WXDXH) 595mm x 540mm x 850mm WEIGHT 50Kg(NET) / 54Kg(GROSS) WATER CONSUMPTION 47~59ℓ POWER CONSUMPTION 2200W MAXIMUM MASS WASH 6 / 6.5 / 7 / 8 kg OF TEXTILE SPIN 6 / 6.5 / 7 / 8 kg WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE) OPERATING WATER PRESSURE 0.
2. INSTALLATION ■ Transit bolts The appliance is fitted with transit bolts to prevent internal damage during transport. ■ Removing transit bolts 1. To prevent internal damage during transport, the special 3 bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. • If they are not removed, it may cause heavy vibration, noise and malfunction. 3. Close the holes with the caps supplied. 8 INSTALLATION 2.
■ Installation place requirement Level floor : Allowable slope under entire washer is 1°. Power outlet : Must be with 1.5 meters of entire side of location of washer. Do not overload the outlet with more than one appliance. Additional Clearance : For wall, door and floor modeling is required. (10cm : rear / 2cm : right & left side) Do not place or store laundry products on top of washer at any times. They can damage the finish or controls. ■ BS Plug Safety Details (For U.K.
■ Connecting inlet hose In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the cold water inlet valve. Option : Be careful not to confuse hot water inlet and cold water inlet. FOR ORDINARY TAP 1 Pull down the collar of the inlet hose to separate it from the water tap adapter. 2 Loosen the four screws properly in order to fit into water tap.
■ Installation of drain hose • When installing the drain hose in sink, secure it tightly with a string. • Proper securing of the drain hose will protect the floor from damage due to water leakage. • The drain hose should not be placed higher than 100cm above the floor. • Proper securing of the drain hose will protect the floor from damage due to water leakage. • When the drain hose is too long, do not force back in to the washer. This will cause abnormal noise.
■ Level adjustment 1. The level adjustment of the washing machine prevents excessive noise and vibration. Install the washing machine on a solid and even floor surface, if possible, in a corner of the room. Note: The wooden floor may cause excessive vibration. leg 2. If the floor is uneven, adjust the adjustable leg as the following. (Do not insert pieces of wood etc. under legs.) • Please check whether there is any gap between four adjustable legs and the floor.
3. MAINTENANCE ❈ Before cleaning the washer interior, unplug the electrical power cord avoid electrical shock hazards. ■ Cleaning your washer 1. Exterior Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent. Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp objects. • Do not use methylated spirits, diluents or similar products. 2.
■ Cleaning the water inlet filter • "IE" error message will blink on the control panel when water does not enter the detergent drawer. • If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. • It is therefore a good idea to clean it from time to time. 1. Turn off the water tap. 2. Unscrew the water inlet hose. 3. Clean the filter using a had bristle brush. 4. Tighten up the inlet hose.
■ Cleaning the detergent case ❈ After a while detergents and fabric softeners leave a deposit in the detergent case. max MAX MAX • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out. • To facilitate cleanling, the upper part of the fabric softener compartment can be removed.
4. DIRECTION FOR DISASSEMBLY DOOR LOCK SWITCH 1) Open the door and remove the gasket clamp. 2) Remove the gasket from the front cabinet. 3) Remove two screws, and remove the door lock switch. HEATER AND THERMISTOR 1) Remove four screws on the back cover, and remove the back cover. 16 DIRECTION FOR DISASSEMBLY 2) Remove connectors and the earth terminal.
3) Remove the nut by using a box wrench, and remove the earth terminal. 4) Loosen the nut by using a box wrench, and pull out the heater. UNIVERSAL MOTOR 1) Remove the belt from the pulley. 2) Lay the right side of the washer on the floor, and remove the connector. 3) Remove two bolts and two nuts mounting the motor by using a box wrench. 4) Remove the motor from the tub.
DRAIN PUMP 1) Lay the right side of the washer on the floor, and remove the lower panel by pressing six sanp fits. 2) Remove connectors. 3) Remove the screw, and remove the drain pump from the lower frame. 4) Remove the drain hose. 5) Remove the inner drain hose, and remove the drain pump.
5.
No.
■ PANEL FRONT AS (DWD-FT @ X @ X SERIES) No.
■ PANEL FRONT AS (DWD-FT1X2X SERIES) No.
■ PANEL FRONT AS (DWD-FT1X3X SERIES) No.
■ PANEL FRONT AS (DWD-FT1X4X SERIES) B06 B10 B08 B15 B16 B07 B09 B05 B11 B14 B13 B04 B03 B12 No.
■ PANEL FRONT AS (DWD-FT1X5X SERIES) B08 B10 B06 B09 B07 B11 B04 B13 B14 B02 B03 B05 Time Save Door Lock Child Lock B12 No.
■ PANEL FRONT AS (DWD-FT1X6X SERIES) B07 B06 B08 B05 B09 B04 B10 B11 B03 B12 B02 B01 B13 No.
■ PANEL FRONT AS (DWD-FT1X7X SERIES) B07 B05 B06 B04 B08 B09 B03 B10 B02 B11 B01 B12 No.
■ Detailed Part Code of PCB AS No.
■ Detailed Part Code of PCB AS No.
■ Detailed Part Code of PCB AS No.
■ Detailed Part Code of PCB AS No.
■ Detailed Part Code of PCB AS No.
■ CABINET FRONT AS • 2 pcs Type No.
■ TUB ASS’Y 34 EXPLODE VIEW AND PARTS LIST
No.
■ CABINET AS E22 E21 36 EXPLODE VIEW AND PARTS LIST
No. PART NAME PART CODE SPECIFICATION Q'TY REMARK E01 CABINET 3610811101 SGCC(GI), 0.7TX825.7X1630.8 1 E02 FRAME LOWER 3612205501 SGCC T1.0 160X580 1 E03 FRAME TOP *L 36122UDY00 SGCC T=1.2, FT1081 1 1 piece E04 FRAME TOP *R 36122UDZ00 SGCC T=1.2, FT1081 1 SVC part E05 BASE UNDER *L 3610392201 SGCC T1.4 100x500 1 E06 BASE UNDER *R 3610392301 SGCC T1.4 100x500 1 E07 FRAME UPPER 36122UE000 SGCC 1.
■ PLATE T AS + PANEL LOWER AS No.
6. FUNCTIONS OF THE CONTROL PANEL ■ DWD-FT1X1X SERIES Power Button Press this button to turn the power ON or OFF. Start/Hold Button This button is use to start wash cycle or stop temporarily. When you want to change program in operating, press this button. Temperature Button This button can be used to adjust temperature of water according to types of the load to be washed. Spin Speed Button By pressing this button, the spin speed can be chosen.
Time Save Button By pressing this button, you can decrease pre-set washing time to 10 minutes. Time save is available in Cotton, Eco and Synthetic. Time Delay Button If you want to reserve the finishing time of washing, use this button. If the Time Delay button is pressed, "2:00" is displayed. The maximum delayed time is 12:00 hours and the minimum time is 2:00 hours. Each pressing of the button advances on time delay by one hour.
■ DWD-FT1X2X SERIES Power Button Press this button to turn the power ON or OFF. Start/Hold Button This button is use to start wash cycle or stop temporarily. When you want to change program in operating, press this button. Temperature Button This button can be used to adjust temperature of water according to types of the load to be washed. Spin Speed Button By pressing this button, the spin speed can be chosen.
Time Save Button By pressing this button, you can decrease pre-set washing time to 10 minutes. Time save is available in Cotton, Eco and Synthetic. Time Delay Button If you want to reserve the finishing time of washing, use this button. If the Time Delay button is pressed, "2:00" is displayed. The maximum delayed time is 12:00 hours and the minimum time is 2:00 hours. Each pressing of the button advances on time delay by one hour.
■ DWD-FT1X3X SERIES Power Button Press this button to turn the power ON or OFF. Start/Pause Button This button is use to start wash cycle or stop temporarily. When you want to change program in operating, press this button. Temperature Button This button can be used to adjust temperature of water according to types of the load to be washed. Spin Speed Button By pressing this button, the spin speed can be chosen.
Time Save Button By pressing this button, you can decrease pre-set washing time to 10 minutes. Time save is available in Cotton, Eco and Synthetic. Time Delay Button If you want to reserve the finishing time of washing, use this button. If the Time Delay button is pressed, "2:00" is displayed. The maximum delayed time is 12:00 hours and the minimum time is 2:00 hours. Each pressing of the button advances on time delay by one hour.
■ DWD-FT1X4X SERIES 1000/1200 Power Button Press this button to turn the power ON or OFF. Start/Pause Button This button is use to start wash cycle or stop temporarily. When you want to change program in operating, press this button. Temperature Button This button can be used to adjust temperature of water according to types of the load to be washed. Spin Speed Button By pressing this button, the spin speed can be chosen.
Time Save Button By pressing this button, you can decrease pre-set washing time to 10 minutes. Time save is available in Cotton, Eco and Synthetic. Time Delay Button If you want to reserve the finishing time of washing, use this button. If the Time Delay button is pressed, '2:00' is displayed. The maximum delayed time is 12:00 hours and the minimum time is 2:00 hours. Each pressing of the button advances on time delay by one hour.
■ DWD-FT1X5X SERIES Power Button Press this button to turn the power ON or OFF. Start/Pause Button This button is use to start wash cycle or stop temporarily. When you want to change program in operating, press this button. Temperature Button This button can be used to adjust temperature of water according to types of the load to be washed. Spin Speed Button By pressing this button, the spin speed can be chosen.
Time Save Button By pressing this button, you can decrease pre-set washing time to 10 minutes. Time save is available in Cotton, Eco and Synthetic. Time Delay Button If you want to reserve the finishing time of washing, use this button. If the Time Delay button is pressed, '2:00' is displayed. The maximum delayed time is 12:00 hours and the minimum time is 2:00 hours. Each pressing of the button advances on time delay by one hour.
■ DWD-FT1X6X SERIES Power Button Press this button to turn the power ON or OFF. Start/Pause Button This button is use to start wash cycle or stop temporarily. When you want to change program in operating, press this button. Temperature Button This button can be used to adjust temperature of water according to types of the load to be washed. Spin Speed Button By pressing this button, the spin speed can be chosen.
Time Save Button By pressing this button, you can decrease pre-set washing time to 10 minutes. Time save is available in Cotton, Eco and Synthetic. Time Delay Button If you want to reserve the finishing time of washing, use this button. If the Time Delay button is pressed, '2:00' is displayed. The maximum delayed time is 12:00 hours and the minimum time is 2:00 hours. Each pressing of the button advances on time delay by one hour.
■ DWD-FT1X7X SERIES Power Button Press this button to turn the power ON or OFF. Start/Pause Button This button is use to start wash cycle or stop temporarily. When you want to change program in operating, press this button. Temperature Button This button can be used to adjust temperature of water according to types of the load to be washed. Spin Speed Button By pressing this button, the spin speed can be chosen.
Time Save Button By pressing this button, you can decrease pre-set washing time to 10 minutes. Time save is available in Cotton, Eco and Synthetic. Time Delay Button If you want to reserve the finishing time of washing, use this button. If the Time Delay button is pressed, '2:00' is displayed. The maximum delayed time is 12:00 hours and the minimum time is 2:00 hours. Each pressing of the button advances on time delay by one hour.
7. FUNCTIONS OF THE CONTROLLER ■ Sequence Chart Division P R E W A S H M A I N W A S H R I N S E S P I N END NOTE Progress Time Sensing Water Supply Pre Wash Drain B-Spin Middle Spin Sensing Water Supply Wash 1 (Heating) Wash 2 Drain B-Spin Middle Spin Water Supply Rinse 1-1 Drain B-Spin Middle Spin Water Supply Rinse 1-2 Drain B-Spin Middle Spin Water Supply Rinse 2 Drain B-Spin Middle Spin Water Supply Rinse 3 Drain B-Spin Main Spin Untangle End Remained Time Display 20sec. 2min. 10min. 8min.
Division M A I N W A S H R I N S E S P I N END Progress Time Soak Water Supply Wash 1 (Heating) Wash 2 Drain B-Spin Middle Spin Water Supply Rinse 1 Drain B-Spin Middle Spin Water Supply Rinse 2 Drain B-Spin Middle Spin Water Supply Rinse 3 Drain B-Spin Main Spin Untangle End Remained Time Display 30min. 2min. 60min. 50min. 35min. 30min. 5min. 20min. 10min. 5min. 1min. 1min. 4min. 2min. 3min. 1min. 1min. 4min. 2min. 3min. 1min. 1min. 4min. 2min. 3min. 1min. 1min. 7min. 5min. 3min. 2min. 10sec.
■ Sequence Chart (for apply 'Islamic Rinse' option) Example) Apply 'Islamic Rinse' option with Cotton/Normal course.
8. FUNCTION OF THE CONVENIENT SERVICE ■ The test mode of the operation You can check the PCB AS and the operation of the washing machine simply. • The method to test and operate 1 Press the Power button. 2 Press the Option button 3 times while press the Temp button. At this time, the version is displayed on the Custom LED 3 Whenever the Time Delay button is pressed, the washing machine is operated as following.
■ The spinning test mode You can continually spin the washing machine with constant speed. • The method to test and operate 1 Press the Power button. 2 Press the Time Save button 3 times while press Temp button. 3 '400' displays on '18:88 LED'. 400 means the spinning rpm. You can adjust the spinning rpm by pressing Spin button. And this value increases by 50 up to 1400. 4 When press Start button, the washing machine continually operates with given spinning rpm.
9. TROUBLESHOOTING GUIDE This wahing machine is equipped with automatic safety function which detect and diagnose faults at an early stage and react appropriately. When the machine does not function properly or does not fuction at all, check the following points. SYMPTOM CAUSE Rattling and clanking noise. Foreign objects such as coins or safety pins maybe in the drum or pump. Stop washer and check drum and filter. Thumping sound. Heavy wash loads may produce a thumping sound. This is usually normal.
SYMPTOM Washer does not start. Washer will not spin. CAUSE SOLUTION Electronical power cord may not be plugged in or connection may be loose. Make sure plug fits tightly in wall outlet. House fuse blown, circuit breaker tripped, or a power outage has occurred. Reset circuit breaker or replace fuse. Do not increase fuse capacity. If problem is a circuit overload, have it corrected by a qualified electrician. Water supply tap is not turned on. Turn on water supply tap.
MESSAGE IE OE ERROR WATER INLET ERROR DRAIN ERROR UE UNBALANCE ERROR LE DOOR OPEN ERROR E2 OVERFLOW ERROR CAUSE The water tap is closed. Open the water tap. The filter of the valve inlet is clogged. Clean the filter of the valve inlet. The valve inlet is an inferior product or broke down. Change the valve inlet. The water level sensor (sensor pressure) is an inferior product Change the water level sensor or broke down. (sensor pressure). The drain motor works during water supply.
MESSAGE ERROR CAUSE H5 WATER TEMP. ERROR H6 HEATER WASH The heater wash dose not work. ERROR (The water temp. doesn't rise over 2˚C during 15min.) The water temp. is over 45˚C in delicate & wool course. (The thermistor wash is an inferior product or broke down.) HEATER WASH H8 The heater worked without the water in the tub. OVERHEATING ERROR lb PFE IGBT ERROR PUMP FILTER ERROR SOLUTION Change the thermistor wash. Change the heater wash. Check the water level and the heater wash.
10.
DAEWOO ELECTRONICS CORP. 1-2, Jeo-dong 1(il)-ga, Jung-gu, Seoul, Korea C.P.O. BOX 8003 SEOUL, KOREA TELEX: DWELEC K28177-8 CABLE: AEWOOELEC” S/M NO. : PRINTED DATE: Jul.
ABOUT THIS MANUAL VISION CREATIVE, INC. 서울 종로구 통의동 6번지 이룸빌딩 4층 담 당 MODEL 김용욱 님 DWD-FT1011/FT1012/FT1013/FT1211/FT1212/FT1213 DWD-FT1021/FT1022/FT1023/FT1221/FT1222/FT1223 DWD-FT1031/FT1032/FT1033/FT1231/FT1232/FT1233 DWD-FT1041/FT1042/FT1043/FT1241/FT1242/FT1243 DWD-FT1051/FT1052/FT1053/FT1251/FT1252/FT1253 DWD-FT1061/FT1062/FT1063/FT1261/FT1262/FT1263 DWD-FT1071/FT1072/FT1073/FT1271/FT1272/FT1273 NFL-1065/NFL-1265 (S/M) 접 수 2011.07.01 MEMO 총 64p 11.07.01-전체 신규 64p 11.07.
