Operation Manual

13. ALLERGY CARE(D-UD121X ONLY)

Note

• You can't select 'Cold' Water temp.

• Please don't wash the weak laundry for high temp.

Put the laundry into the Drum and put the detergent and softerner into the detergent

case.

Then close the Door.

• Put the detergent into the main wash room(I I marking).

• Softener should be below 'MAX' level.

• Put the detergent into the pre wash room(I marking) only if you want to add prewash.

• When you want to use bleach, put it into the main wash room (I I marking) with

detergent.

Press the Power button.

• The LED shows only '- --' signal.

Select the 'Allergy Care' program using the program selection dial

• If you press 'Start/Pause' button after pressing Power button without selecting

program, the 'Normal' program is selected as default program.

• 'Main wash' and 2 times rinse and 'Medium' Spin speed and '40°C' water temperature

are selected automatically.

• If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed'

select program what you want to change by pressing each button.

Press the 'Start/Pause' button.

• The washer will be operated with locking Door and supplying water after sensing the

amount of laundry automatically.