Service manual

13
4. Method to reduce the gap between the door seal and the oven front surface.
(1) To reduce gap located on part ‘A’.
• Loosen two screws on stopper hinge top, and then push the
door to contact the door seal to oven front surface.
• Tighten two screws.
(2) To reduce gap located on part ‘B’.
• Loosen two screws on stopper hinge under, and then push
the door to contact the door seal to oven front surface.
• Tighten two screws.
FISH
MEAT
POULTRY
CLOCK
KITCHEN
0
START/
SPEEDY COOK
TIMER
STOP/CLEAR
DEFROST
POWER
1
4
7
2
5
8
3
6
9
lb
LOCK
M/W
DEF TIMER
DINNER
VEGETABLE
FROZEN
LESS
POPCORN
PIZZA
FROZEN
BEVERAGE
FRESH
VEGETABLE
MORE
PLATE
B
A
NOTE : A small gap may be acceptable if the microwave leakage does not exceed 4mW/cm
2
.