NEXT Type No.
BACK U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
F109A1 19" Dual Function Monitor BACK NEXT Contents 1. Introduction ...................................1/22 2. Safety Information ........................1/22 3. Installing the monitor ...................4/22 3-1. Packing List .........................................4/22 3-2. Selecting a suitable location ..............5/22 3-3. Connecting the monitor .....................5/22 3-4. Setting the refresh rate ......................8/22 Preset Timing Table ............................8/22 3-5.
BACK F109A1 19" Dual Function Monitor NEXT 1. Introduction This manual contains instructions for installing and operating Daewoo Computer F109A1. Daewoo Computer F109A1 is a highly ergonomic color display unit. 2.
BACK F109A1 19" Dual Function Monitor NEXT Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire.
F109A1 19" Dual Function Monitor BACK NEXT Cleaning and Maintenance • • • • • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface.
BACK F109A1 19" Dual Function Monitor 3. Installing the monitor NEXT The following items should be found in the packaging. 3-1. Packing List Power Cord Signal Cable DVI-D Cable Audio Cable Compact Disc ! Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged. Other power cord except the cord packed in the product or longer than 3m may affect EMC of the product in operating condition.
F109A1 19" Dual Function Monitor 3-2. Selecting a suitable location • • • • • 3-3. Connecting the monitor • 15 pin D-sub / DVI-D ! 1. 2. 3. 4. BACK NEXT Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window.
BACK F109A1 19" Dual Function Monitor 5. NEXT Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information.
F109A1 19" Dual Function Monitor BACK NEXT • Audio system This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 2Wrms (typ.) output power. This system also supports a headphone output jack. ! This system has been tuned to get a best tone quality which an audio input level is under 300mVrms. if the input level is more than 600mVp-p, you must tune down the audio input as the audio output tone may be distorted.
F109A1 19" Dual Function Monitor 3-4. Setting the refresh rate BACK NEXT Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value.
F109A1 19" Dual Function Monitor Preset Timing Table BACK NEXT ANALOG R.G.B INPUT The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz. No. Resolution Horizontal Frequency Refresh rate 1 2 3 4 5 6 7 8 9 10 11 12 13 14 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 31.5 KHz 31.5 KHz 37.5 KHz 35.2 KHz 37.9 KHz 48.1 KHz 46.9 KHz 49.7 KHz 48.4 KHz 56.5 KHz 60.0 KHz 67.
BACK F109A1 19" Dual Function Monitor NEXT 3-5. User’s Environment Recommended Ergonomic User’s Environment • Viewing angle of the monitor should be between 0~20 degree. 20o Kensington security slot Kensington Security (Locking) Slot • • This display unit supports a Kensington-type security device to secure your monitor. Kensington lock is not included. To purchase and install the Kensington locking device, please refer to the following contact information.
F109A1 19" Dual Function Monitor BACK NEXT VESA MOUNT’G • • This display unit supports VESA FPMPMI standard for 75mmx75mm screw mounting by giving 4 screw holes inside the base stand of the unit. For buying VESA Flat Panel Monitor Mounting Devices, please contact following information. * Ergotron, Inc. · Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands · Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59 · E-mail : info.eu@ergotron.
F109A1 19" Dual Function Monitor BACK NEXT 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. In case of applying Analog RGB Input 1280x1024 H:63.9 V:60.
F109A1 19" Dual Function Monitor BACK NEXT In case of applying Digital TMDS Input 1280x1024 H:63.9 V:60.
F109A1 19" Dual Function Monitor 4-1. Using the On Screen Display 1. 2. 3. 4. 5. 6. BACK NEXT Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu.
BACK F109A1 19" Dual Function Monitor NEXT 4-3. OSD Adjustments The OSD adjustments available to you are listed below. BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish. There are three color settings available: Mode 1(a cool white), Mode 2(a warm white) or USER.
BACK F109A1 19" Dual Function Monitor NEXT CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire screen image. MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER You can set the displayed time of OSD Menu window on the screen by using this adjustment. OSD POSITION Adjust the OSD menu's horizontal or vertical position on the screen. AUTO COLOR Optimum color setting is auto programmed for user’s convenience.
BACK F109A1 19" Dual Function Monitor NEXT AUDIO VOLUME Adjust the audio volume level. AUDIO This menu is used to choose audio on or off. AUTO ADJUST You can adjust the shape of screen automatically at the full screen pattern. INPUT SELECT This menu used to choose the desired input signal source. There are two available signal source. • Analog R.G.
BACK F109A1 19" Dual Function Monitor 5. Display power management Reducing power consumption NEXT If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
BACK F109A1 19" Dual Function Monitor NEXT 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below : Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys.
BACK F109A1 19" Dual Function Monitor Problem NEXT Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative.
BACK F109A1 19" Dual Function Monitor Problem The power LED is a orange color NEXT Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent.
F109A1 19" Dual Function Monitor 7. Specifications LCD Pixel pitch Brightness Response Time Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Built in Speaker VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) BACK 19"viewable, Diagonal, A-Si TFT 0.294 x 0.294 mm 250cd/m2 25msec 376.32 x 301.056 mm 16,7 milion colors R.G.
