S/M No. : FR33000011 Service Manual Refrigerator Model: FR-330 ✔ Caution : In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information,please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). DAEWOO ELECTRONICS CO., LTD.
CONTENTS contents 1. SPECIFICATION ......................................................................................1 2. NAME OF PARTS .....................................................................................2 3. REFRIGERANT CYCLE DIAGRAM .........................................................3 4. MACHINE ROOM VIEW AND PART LIST ................................................4 5. METHODS OF EXCHANGING MAIN PARTS ..........................................5 6.
1.
2.
3.
4.
5. METHODS OF EXCHANGING MAIN PARTS (1) Freezing room louver 1) Unscrew, remove the F-louver by pulling forward with inserting screwdriver into the hole of F louver. 2) Assemble it by pressing triangle shape ( ) by hand. (2) R control box 1) After pressing both bottom surfaces of shade and pull forward. 2) To exchange the interior lamp, unscrew the lamp counterclockwise.
Methode of exchanging main parts 4) Pull slightly forward with instant force. 5) Remove the housing 6) After romoving the control switch knob and two screws for fixing control switch, change the control switch to new one.
Methode of exchanging main parts (3) Bimetal 1) Cut off the wire bind. 2) Take out the bimetal. BIMETAL (4) Glass tube heater 1) Remove 2 screws that fasten the evaporator. 2) Slightly pull the evaporator to the arrow's direction. 3) Move the entire eveporator upward the pipe center to the arrow's direction. (Do not crumble the part A of the accumulator during the process.
Methode of exchanging main parts 4) Cut the both ends of glass tube heater tube heater lead wires and insulate and seal lead tip remaining in refrigerator with tape etc. Raise d Heater Cover Heater Glass tube fi t heater Lead wire 5) Pull out the glass tube heater from the heater supporter with heater covers remaining. (upper and lower) (Do not apply much power on the heater supporter.) Heater Cover (Bottom) Heater Cover (Top) 6) Install the heater covers (upper and lower) on a new glass tube heater.
6. EXPLODE VIEW AND PARTS LIST 1.
✔ Caution: In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr) 7.
NO 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 PART CODE 3012624000 3011610810 3019015700 3019015800 3012310010 3019016200 7002501611 3011165700 3019015900 3019016000 3019016100 3012624200 3011611110 3014443500 7112401211 PART NAME HANDLE F A DECO F HNDL AS POCKET F *T POCKET F *U ASSY R DOOR URT GASKET R DR AS POCKET SM SCREW MACHINE CASE EGG POCKET EGG POCKET MULT POCKET BOTL HANDLE R A DECO F HNDL AS PIPE WI-CON AS SCREW TAPPING DESCRIPTION ABS GPPS GPPS HCFC-141B PVC-S GPPS TRS 5X16 MFZN GPPS GPP