Service manual

NOTE: After replacting the door assembly, perform a

check of correct alignment with the hinge and

cavity front plate.

1. To remove cabinet

1) Remove four screws on cabinet back.

2) Push the cabinet backward.

2. To remove guide wind assembly

1) Remove two screws which secure the stopper hinge top.

2) Remove the door assembly from top plate of cavity.

3) Reverse the above for assemby.

3. To remove door parts.

KOC-910K

REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK

A01 3512603600 HANDLE DOOR PC 1

A02 3512204800 FRAME DOOR PC 1

A03 3517007100 BARRINER-SCREEN*O TEMP GLASS T3.2 1

A04 3515204900 STOPPER HINGE*T AS KOC-1B0K0S 1

A05 3512302400 GASKET DOOR PBT 1

A06 7122400811 SCREW TAPPING T2S TRS 4X8 MFZN 2

A07 3513101200 HOOK POM 1

A08 3515101800 SPRING HOOK PW1 1

A09 3511714700 DOOR SEAL AS KOC -910K0S 1

✔ Caution:

In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the

latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr)