Service manual
17
10. To remove Lamp assembly parts.
1) Remove a screw
1
and pull out Guide air outlet
2
.
2) Remove two screws
4
and pull out insulator heater *t
3
.
3) Pull out the Lamp assembly.
4) Remove two screws
6
pull out the Lamp assembly.
5) Pull out the Holder lamp assembly
7
from the Cover lamp
5
.
6) Pull out the Lamp
8
from the Holder lamp assembly
7
.
7) Reverse the above steps for reassembly.
1
2
3
4
6
7
8
5
9
REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK
1 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 1
2 3512520500 GUIDE AIR OUTLET SA1D T0.5 1
3 3513303000 INSULATOR HEATER*T SECC T0.5 1
4 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 2
5 3511407800 COVER LAMP STS430 T0.5 1
6 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 2
7 3513003900 HOLDER LAMP AS KOC-1B0K0S 1
8 3513602600 LAMP HALOGEN 2
9 3511407810 COVER LAMP GLASS T2.0 1
✔ Caution:
In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the
latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr)