Service manual

18
11. To remove Top heater assembly parts.
1) Remove a screw 1 and pull out Guide air outlet 2 .
2) Remove two screws
4 and pull out insulator heater *t 3 .
3) Pull out the Top heater assembly.
4) Pull out the Harness heater
5 .
5) Pull out the Braket heater*t from the Cover heater*t
8 .
6) Pull out the Heater miraclon
7 from the Cover heater*t 8 .
7) Reverse the above steps for reassembly.
1
2
3
4
6
7
8
5
REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK
1 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 1
2 3512520500 GUIDE AIR OUTLET SA1D T0.5 1
3 3513303000 INSULATOR HEATER*T SECC T0.5 1
4 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 2
5 3512767000 HARNESS HEATER KOC-1B0K0S 1
6 3510607700 BRACKET HEATER *T SA1D T0.5 1
7 3512803800 HEATER MIRACLON 115V 550W 270MM 2
8 3511407600 COVER HEATER *T STS430 T0.5 1
✔ Caution: In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the
latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr)