Use and Care Manual

MEMORY FUNCTION

This microwave oven has 20 programmable pads (1~20).

After programming is finished, just touch the NUMBER pad of the memory number you want to select.

To select the memory number 11 to 20, touch the number pad twice rapidly. Then the oven will

automatically start heating according to the pre-programmed cooking time and power level.

* Preprogrammed Cooking Times and Power Level

Pad Cooking Time Power Level

1 10sec. 100 %

2 20sec. 100 %

3 30sec. 100 %

4 45sec. 100 %

51 min. 100 %

61 min. 30sec. 100 %

72 min. 100 %

83 min. 100 %

94 min. 100 %

10 5 min. 100 %

1. Touch PROGRAM pad.

2. Touch the NUMBER pad to be

programmed.

(ex. number pad 1)

3. Touch POWER pad.

(Select desired power level.)

4. Touch the NUMBER pads for

cooking time.

5. Touch START pad to save

cooking time and power level.

6. Touch STOP/CLEAR pad.

The display will show “PROGRAM”.

The display will show "PROG-01".

To program pads 11 to 20, touch number pad

twice rapidly.

(ex. to program pad 11, touch number pad

1 twice rapidly.)

The MICROWAVE and % indicators light.

The display will show what you touched.

The display will show “STAGE-2” and long

beep sounds.

When you touch STOP/CLEAR pad,

MEMORY function ends.

PROGRAM

NOTE 1: If you want cooking in two or three stage, repeat step 3~5 once or twice, and display will

show “STAGE-2” or “STAGE-3”.

After touching START pad to save cooking time and power level in 3-stage, you can see

“ - END - ” on the display.

NOTE 2: In case of original set, number 1~10 is programmed but cooking data is changeable later.

And number 11~20 is not programmed, so you will save cooking data.