VACUUM CLEANER INSTRUCTION MANUAL Model: RC-382A 䮦#Read the instruction manual carefully before using this vacuum cleaner! 䮦##To protect environment, Please don’t throw away this unit with daily rubbish together.
FEATURES Warning: DESCRIPTION OF THE PARTS 1.This appliance is for household use only, It is only used indoors for dust, but not applied for industrial or decorating areas. It can not suck in water. 2.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 3.
PRECAUTIONS HOW TO ASSEMBLE 䮦#Before using, please make sure the network voltage coincides with the product rated voltage. 䮦##Keep the appliance away from stove or any other high temperature objects so as not to influence its operation by deforming its plastic parts. 䮦##Do not bend, extrude or pull by the flexible hose, Stop using the broken or damaged hose, instead to use the new hose. 䮦##When you need to clean your appliance or stop operation, unplug from the power outlet.
TO START OPERATION 䮦#Pull out the power cord The power cord can be pulled out as long as it is marked with yellow color. It is forbidden to exceed the red mark 䮦#Power button After plugging into electrical power outlet, press the power button on the body cover to control start and stop. 䮦#Replacing the dust bag 1) Lift up by the front cover clamp to open the front cover (fig.3) 2) To take out the dust bag from dust bag holder.(fig.4) 3) If you use a paper dust bag, replace it with a new one.
TROUBLE SHOOTING GUIDE 䮦#Power cord rewinding When not in use, unplug from the electrical power outlet and then press the cord rewinding button to feed back the power cord. 䮦#For storage Insert the plastic holder of the Connecting tube into the unit base or holder hook on the back unit. 䮦 Please check the following details before you have your appliance repaired in an authorized servicing department. Problem Possible reason Solution 1. Check if the power plug is firmly inserted into the outlet.
