VACUUM CLEANER OPERATION MANUAL Model : RCW-401 / RCW-401 RCW-401 / RCW-401 RCW-401
CONTENT 1. Importance & Safety ........................................ 2 2. Structure and Components.............................. 3 3. Dust Empty and Maintanance ......................... 7 4. Trouble shooting .............................................. 9 5. Technical Data Require.....................................
1. IMPORTANCE&SAFETY Welcome to use our vacuum cleaner. You should read the manual before operation to make sure safety. Please keep the manaul properly for reference later • Your vacuum cleaner is a electric appliance: it should be operated under normal conditions.
2. STRUCTURE AND COMPONENTS A. Structure figure 11 1 2 7 10 8 12 3 9 4 13 5 6 14 1. 2. 3. 4. 5. 6. 7. 15 Blowing Cover Real Cover Handle Auto Cord Rewinder Parking Groove Accessory Cover Speed Control Board 16 17 8. Power Switch 9. Inhale Plug 10. Hose 11. Curved Tube 12. Adjustabel Tube 13. Double usage brush 14. Small Brush 3 18 19 20 15. Small Suction nozzle 16. Combined Nozzle 17. Water Barrel 18. HEPA Cover 19. HEPA Cover Key 20.
B. Operation Guidance 1. Take out the Inhale Plug by pressing the button according to the direction indicated, in the figure at left side. 2. Open the Rear cover according to the direction indicated in the figure at left side. 3. After opening the Rear Cover, take out the water barrel by grasping the groove up forward according to the direction indicated out in the figure. 4. Adding water of proper capacity before operation. Refer to the figure at the left side. NOTE: Adding about 0.
● Replace the Rear Cover ● Plug in the Inhale Plug into the unit. ● Set in the adjustable tube into the Cured Tube and make sure the connection is firm. ● Use of the Telescopic chrome extension tube. Adjust the the tube to a proper length by pressing the control button. And the tube will be lock automatically after releasing the button. Startup and Speed Control Plug in power cord, press the power switch to startup the machine. Press inching switch on the big handle to control speed.
● Press the accessory cover and release, the over will be open auto., Take out the accessories.When use, insert it into the telescope tube. ● Combination nozzle is use for cleaning gap, corner, baseboard and liner gap. The nozzle head can be rotate to the mode of nozzle and brush. Blowing Function ● Use the small brush can avoid to injuring surface of funiture and carpet.
3. DUST EMPTY AND MAINTANANCE A. Empty Dust ● Take out the water barrel from the machine. ● Pour out the sewage and rinse the barrel under water. A. Maintanance ● Take the filteration rack apart from the machine according to the direction indicated in the figure at left side. ● Take out the filter, cleaning in water and let it dry naturally. Importance: 1. The filter should be cleaned twice a year. Or if it is visibly dustied, clean it at once. 2. when operation, dustbag should be fit in. 3.
2. After open HEPA cover, take out the HEPA, dispose dust on the HEPA. NOTE: HEPA should be cleaned at least once a year. 3. Fit the clean HEPA in the machine, replace the cover of HEPA, lock the cover by pushing the button of the cover. 4. Open the Air Inhale Window 5. Take out the Air Inhale Window and Air Inhale Filter,clean the filter by water and dry it in air. NOTE: The Air Inhale Filter should be clean at least once a year. 6. Fit in the Air Inhale Filter and Window.
4. TROUBLE SHOOTING NOTE: Cut off power and pull out the plug before starting to get rid of troubles. If the vacuum power decreading, and sounds abnormally, stop vacuuming or motor over heat. 1. Some vaccum components may be blocked - dredge the blocked component. 2. Filter been blocked - clean or replace; If the trouble still exsits, please contact our maintenance serivice department. 5.