Service manual

2
1) T-Mecha Deck follows the VHS standard.
2) T-Mecha Deck uses three motors(Drum motor, Capstan motor and L/C motor)
3) T-Mecha Deck uses L/C motor to drive Front Loading.
4) T-Mecha Deck recognizes each mode by using a 4-Bit Mode signal.
This 4-Bit Mode signal is generated by the Cam Switch which is driven by the L/C Motor.
5) T-Mecha Deck is operated by 6 Modes(Eject/Initial/Review/Idle/Play, Stop,Slow/Brake/FF&Rewind).
6) T-Mecha Deck reduces the mode shifting time, that is, picture playing time by using the Full Loading System
that has the Drum wrapped by the tape.
7) T-mecha Deck is seperated from the Main PCB.
When assembling, it is connected by B-B Type connector.
The Capstan motor and Drum output of T-mecha Deck and the Main PCB are directly connected without
using cable
.
1. DESCRIPTION OF THE MECHANISM
1-1 Characteristic Of the T-Mecha Deck Mechanism
1-2 Timming Chart