User`s manual

Back Light
If the scene has too much Back Light (light behind the
subject) the AGC (Automatic Gain Control) and Auto Shutter
circuits may adjust to the back light instead of the subject.
Use the Pattern which provides the best picture. The Back
Light function works only when AGC and/or Auto Shutter
are on and the illumination level is sufficient for the
automatic circuits to function.
Ptrn.1:
Provides highest amount of compensation.
Ptrn.2:
Provides moderate amount of compensation.
Off:
Provides no Back Light compensation.
Camera Title
The Camera Title provides eight characters of lower or
upper case letters or numbers or symbols. To edit the title,
use the OSD Remote. Press
MENU
, then
DOWN
until
CAMERA TITLE
flashes, then
RIGHT
, then
DOWN
until
ON
appears, then
RIGHT
again. Now the first character of title
will be flashing. Press
UP
or
DOWN
to change the character,
then press
RIGHT
to move to the next character. Repeat this
until all characters have been edited. Press
MENU
to exit and
store, or
LEFT
to return to other menu items.
Iris
CCD Iris:
This setting sets the camera into
AUTO
SHUTTER
. (changes shutter setting to auto)
CS Mount:
This setting sets the camera
SHUTTER
to
OFF
. (changes shutter setting to off)