User`s manual

For example, to change the shutter setting from off to auto:
1. Press
MENU. WHITE BALANCE
will be flashing.
2. Press
DOWN. SHUTTER
will be flashing.
3. Press
RIGHT. OFF
will be flashing.
4. Press
UP
or
DOWN
to scroll through the available
settings, when
AUTO
appears, stop.
5. Press
MENU
to store
AUTO
and turn off display, or
press
LEFT
then
UP
or
DOWN
to edit other menu
items in a similar matter.
NOTE: When editing
MANUAL WHITE BALANCE
and
CAMERA TITLE,
an additional
RIGHT
press is needed to
activate the adjustment cursor, then
UP/DOWN
to change
values and
LEFT/RIGHT
to change characters as necessary.
White Balance
One Push:
By pressing the
ONE PUSH (AWB
) on the
remote, the camera automatically white balances to the
present scene, then stores setting until
ONE PUSH
is
pressed again or camera power is turned off. When
camera power is turned back on a
ONE PUSH (AWB
)
cycle is performed. Pressing the
ONE PUSH
button
automatically changes the White Balance menu setting
from the previous setting to the
ONE PUSH
setting.
There must be adequate white area in the scene and
illumination to perform a white balance or the camera
will wait before completing the white balance. The
typical method of white balancing in this mode is to
set the illumination level, place a white object in the
scene (if there is not enough white in scene), then
press
ONE PUSH. ONE PUSH (AWB
) should be
readjusted when light intensity is changed.