® 828 HD PAPER & HARD DRIVE SHREDDER Operating Instructions Dahle 828 HD
TABLE OF CONTENTS CONTENTS PAGE Safety Precautions................................................................................................................................ 3-4 Installation................................................................................................................................................... 4 Operation.................................................................................................................................................
IMPORTANT SAFETY PRECAUTIONS Your new shredder features powerful cutting mechanisms that may cause serious injury. Please follow all safety precautions.
IMPORTANT SAFETY PRECAUTIONS 1. It is obligatory to follow the safety instructions! 2. Read the operating instructions carefully before using the shredder! 3. This shredder is not intended to be used by children (the product is not a toy)! 4. Do not touch the feed opening with your hands! 5. Do not allow items of clothing to touch the feed opening! 6. Do not allow your hair to touch the feed opening! 7.
OPERATION POWER ON • Open breaker panel door and turn ON the switch/breaker located on the left side of the cabinet and close the breaker panel door. • Insert Key and turn to the ON position. FOR HARD DRIVE DESTRUCTION (2.5” and 3.5”) • Slide open the Hard Drive feed door and input one hard drive. • Slide shut the feed door. • Press START twice on the control panel. DO NOT open the feed door during the shredding process. • Press STOP after the hard drive has been shredded and the chamber is empty.
OPERATION REVERSE MODE • In the event of a jam, press the REV (reverse) button. Reduce the capacity of material to be shredded and re-insert into the shredder. CLEANING • From the STOP mode, push and hold the reverse (REV) button for five seconds. The machine will cycle through a one-minute cleaning mode and then automatically STOP. It is recommended to activate CLEANING mode monthly, or every time the waste containers are emptied.
MAINTENANCE • After emptying waste container, it is recommended to run a CLEANING cycle by pressing and holding the REV button for five seconds. The machine will cycle through a one-minute cleaning mode and then automatically STOP. • Switch off the shredder and disconnect power by removing power cord from wall outlet. • Clean the exterior of the machine with a soft cloth. Do not use harsh detergents or chemicals.
TROUBLESHOOTING 8
Version 4/2019 Dahle North America, Inc. 49 Vose Farm Road Peterborough, NH 03458 Tel. (800) 995-1379 info@dahle.com www.dahle.