User's Manual
5
OPERATION
POWER ON
• Open breaker panel door and turn ON the switch/breaker located on the left side of
the cabinet and close the breaker panel door.
• Insert Key and turn to the ON position.
FOR HARD DRIVE DESTRUCTION (2.5” and 3.5”)
• Slide open the Hard Drive feed door and input one hard drive.
• Slide shut the feed door.
• Press START twice on the control panel. DO NOT open the feed door during the
shredding process.
• Press STOP after the hard drive has been shredded and the chamber is empty.
• The LED counter can be reset by pressing the RESET button.
FOR PAPER DESTRUCTION
• Pressing the START button on the control panel will put the machine in AUTO mode.
• AUTO mode: insert paper into the feed opening and the shredder will automatically
start the shredding process. Once paper passes through the shredder, the machine
will stop automatically.
• MANUAL mode: with the START button illuminated, press the START button again
to put the machine in MANUAL mode for continuous shredding. Press the START
button again to turn o Manual mode.