User's Manual

REVERSE MODE

• In the event of a jam, press the REV (reverse) button. Reduce the capacity of materi-

al to be shredded and re-insert into the shredder.

CLEANING

• From the STOP mode, push and hold the reverse (REV) button for ve seconds. The

machine will cycle through a one-minute cleaning mode and then automatically

STOP. It is recommended to activate CLEANING mode monthly, or every time the

waste containers are emptied.

DOOR OPEN

• The DOOR OPEN will illuminate if the safety shield feed opening door located on

the top of the machine or the cabinet door is open. Both must be closed for the

machine to operate.

FULL

• The FULL LED will illuminate if one or both of the waste containers are full. Open

the cabinet door, empty the waste container, replace the waste container, close the

cabinet door, and press the START button to resume shredding.

EMERGENCY STOP

• Press the EMERGENCY STOP button to immediately turn OFF the

shredder. To resume operation, turn the red knob clockwise until

it releases.

OPERATION