User Manual

Product Introduction 3
Function
Description
Real-time spot
temperature
measurement
For cameras with temperature measuring, you can check the real-time
temperature data of any spot in your monitoring area.
Laser ranging
For cameras with laser ranging, you can measure the distance
between the camera and the object in the middle of the image.
Additional
functions
Switch video bit stream or streaming protocol.

The visible image will be adjusted to the relevant location when

you zoom in or out the thermal image.
Mark information you need in the surveillance image.

Check whether there is any alarm output.

Magnify part of the surveillance image. Or, scroll the mouse to

zoom the whole surveillance image.
You can help the camera focus manually on the web interface.

Set a smart rule. When the rule is broken and an alarm is

triggered, you can track the target manually.
Adjust display effect of the surveillance images.

Boot up or shut down the intelligent rule display.

Playback
Table 1-2 Description of playback function
Function
Description
Videotaping
manually
When playing back a video, you can record the key information of the
previous video for further check and handling.
Planned
recording
After you set a recording plan, the system will record automatically.
Video playback
and download
Play back a previous video to find some valuable video

fragments.
Download the valuable video fragments for further judgment.

Picture playback
Play back pictures you have snapshot to find something valuable.
Relay activation
When there is an alarm, the system will videotape automatically.
Report
You need to follow certain rules such as time sequence to check history data of temperature
saved in the device Micro SD card.
Alarm
 Set prompting mode (sound, for example) based on the alarm type.
 View alarm information.
Account Management
Table 1-3 Function description
Function
Description