Instruction Manual

121
7.3.3 Advanced
7.3.3.1 HDD Management
HDD management includes net storage management and local storage management.
Please note, if you want to use local storage function, your storage device need to support
current function.
Please select the storage device first and then you can see the items on your right become valid.
You can check the corresponding item here. See
X472H472H472HFigure 7-44X.
Figure 7-44
Please refer to the following sheet for detailed information.
Parameter Function
Format Clear data in the disk.
Read/write Set current disk as read/write
Read only Set current disk as read.
Redundant Set current disk as redundant disk.
Recover Recover dada after error occurs.
Use as
snapshot
Set current disk as snapshot disk.
Please note system needs to reboot to activate current setup.
7.3.3.2 Alarm I/O
Here you can search alarm output status. See X473H473H473HFigure 7-45X.