Daim Ntawv Qhia Tus Neeg Siv

Quick Start Guide
1
1 Introduction
Cable 1.1
Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and
water damage. For the detailed operation, see FAQ manual.
Cables Figure 1-1
Table 1-1 Cable information
No. Port name Description
1 Power input
Inputs 12 VDC power. Be sure to supply power as instructed in
the manual.
Device abnormity or damage might occur if power is not
supplied correctly.
2
Ethernet port
Connects to network with network cable.
3 Alarm I/O
Includes alarm signal input and output ports, and the number
of I/O ports might vary on different devices. For detailed
information, see Table 1-2.
4 RS-485
Controls external PTZ and so on.
Yellow: RS-485 A. 
Orange: RS-485 H.

5 Audio input
Connects to sound pickups to receive audio signal.
Audio input is available on select models.
6 Audio output
Connects to speaker to output audio signal.
Audio output is available on select models.
7
CVBS
Outputs analog video signal.
Table 1-2 Alarm information
Port Port Name Description
Alarm I/O
ALARM_IN
Receives the switch signal of external alarm source.
Connect different alarm input devices to the same
ALARM_IN_GND port.
ALARM_GND