Daim Ntawv Qhia Tus Neeg Siv

Quick Start Guide
1
2 Network Configuration
Device initialization and IP setting can be finished with the ConfigTool or on web page. For more
information, see web operation manual.
 Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
 Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stays in the same network segment.
 Plan usable network segment properly to connect the device to the network.
 The following figures and interfaces are for reference only.
Initializing Device 2.1
Double-click ConfigTool.exe to open the tool. Step 1
Click . Step 2
Click Search Setting. Step 3
Setting Figure 2-1
Select the searching way. Step 4
 Current Segment Search (default)
Select the Current Segment Search checkbox. Enter the username in the Username
box and the password in the Password box. The system will search for devices
accordingly.
 Other Segment Search
Select the Other Segment Search checkbox. Enter IP address in the Start IP box and
End IP box respectively. Enter username and password. The system will search for the
devices accordingly.
 If you select the Current Segment Search checkbox and the Other Segment Search
checkbox together, the system searches for devices under both conditions.
 Enter username and password when you want to change IP, configure the system,
update the device, restart the device, and more.
Click OK. Step 5
Select one or several devices in uninitialized status, and then click Initialize. Step 6
Select the devices to be initialized, and then click Initialize. Step 7
 If you do not provide the linked information for password reset, you can reset the
password only through XML file.