User Guide
Table Of Contents
7
Figure 3-2 Run DB25 cables
Step 4 Attach the host box to the front beam with four M6 × 50 cross pan head screws.
Figure 3-3 Attach host box
Step 5 Connect one end of the two DB25 cables and power cable to one detector panel, and then
attach the front beam and rear beam to the detector panel with four M8 × 8 screws.
Figure 3-4 Fix beams (1)
Step 6 Connect the other end of the two DB25 cables and power cable to the other detector
panel, and then attach the front beam and rear beam to the detector panel with four M8 ×
8 screws.