Users Manual

Product Usage
Turn on/off the device
Long press and hold the power key for 2 seconds to turn on or off the device.
Bluetooth
When Bluetooth is not connected, long press to turn Bluetooth on/off.
When Bluetooth is connected, long press to disconnect the current Bluetooth connection.
Mode 3: Connect this device with Bluetooth. The Bluetooth indicator will flash to indicate that
the device is in Bluetooth pairing state. Enable Bluetooth functions on mobile phones/other
devices, and select to connect this device from the Bluetooth device list. Please refer to the
nameplate at the bottom of the device for the name of bluetooth (when the conference panel
is connected to the wireless omnidirectional mic speaker, USB bluetooth adapter is required
to ensure the stability of bluetooth connection).
Four types of connection modes
Note: to connect computer/conference plat with USB Bluetooth audio adapter, it is necessary to set this
device as the default playback and recording device in the computer/conference plat sound setting interface.
Mode 1: Connect the computer/conference plat (Windows or Mac) to this device via USB
cable.
Mode 2: Connect this device with the original AUX audio cable (4 sections).
Mode 4:USB Bluetooth audio adapter (supporting win7/8/10 and Mac OS)， operating as
follows:
① Insert the USB Bluetooth audio adapter into the comp uter, and turn on the device to enter
the Bluetooth pairing status (If you use a USB Bluetooth adapter to connect to the conference
plat, please connect it to the front-mounted USB port of the conference plat to ensure best
use effect);
② USB Bluetooth audio adapter will be automatically connected to the device(which is the only
device bound by 16 USB Bluetooth audio adapter);
③ If it is necessary to re-pair the USB Bluetooth audio adapter to the new wireless
omni-directional speaker, the distance between the USB Bluetooth audio adapter and the
wireless omni-directional speaker should be controlled within 3 meters. When Bluetooth is
disconnected from the wireless omni-directional speaker, long press and hold the Bluetooth
key for 9 seconds to enter the binding mode. After plugging the USB Bluetooth audio adapter,
USB Bluetooth audio adapter will be rebound successfully within 30 seconds.
3