User Guide

Quick Start Guide
5
Figure 2-4 Change IP address
Step 3 Select Static mode, and then enter start IP, subnet mask, and gateway.
● IP addresses of multiple devices will be set to the same if you select the Same IP
checkbox.
● If DHCP server is available on the network, devices will automatically obtain IP addresses
from DHCP server when you select DHCP.
Step 4 Click OK.
2.3 Logging in to Web Page
Step 1 Open IE browser, enter the IP address of the device in the address bar, and then press the
Enter key.
If the setup wizard is displayed, finish the settings as instructed.
Step 2 Enter the username and password in the login box, and then click Login.
Step 3 For the first-time login, click Click Here to Download Plugin, and then install the plugin as
instructed.
The home page is displayed when the installation is finished.