User Guide

Quick Start Guide
1
1 Introduction
1.1 Cable
Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and
water damage. For the detailed operation, see FAQ manual.
Figure 1-1 Cables
Table 1-1 Cable information
No.
Port Name
Description
1
Ethernet port
Connects to network with network cable.
Do not connect both network cable and Wi-Fi at the same time.
2
Power port
Inputs 12 VDC power. Be sure to supply power as instructed in
the manual.
Device abnormity or damage might occur if power is not
supplied correctly.
1.2 LED Status
Table 1-2 LED status
LED Status
Device Status
Solid green
Working properly.
Fast flashing green
Connecting to Wi-Fi.
Slowly flashing green
Enabling device hotspot.
Solid red
● Starting/Restarting.
● Resetting to factory default.
Slowly flashing red
Wi-Fi disconnected.
Flashing red and green
Updating firmware.