User Guide

Quick Start Guide
2
2 Network Configuration
Device initialization and IP setting can be finished with the ConfigTool or on web page. For more
information, see web operation manual.
● Device initialization is available on select models, and it is required at first-time use and after
device is reset.
● Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay on the same network segment.
● Plan usable network segment properly to connect the device to the network.
● The following figures and pages are for reference only.
2.1 Initializing Device
Step 1 Double-click ConfigTool.exe to open the tool.
Step 2 Click Modify IP.
Step 3 Click Search Setting.
Figure 2-1 Setting
Step 4 Select the searching way.
● Current Segment Search (default)
Select the Current Segment Search checkbox. Enter the username in the Username
box and the password in the Password box. The system will search devices accordingly.
● Other Segment Search
Select the Other Segment Search checkbox. Enter IP address in the Start IP box and
End IP box respectively. Enter username and password. The system will search for the
devices accordingly.